The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check can be easily replaced with a simple test in the JSON
implementation and we don't need to update it every time a new parameter
is added.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The macro (now called PARSE_SET) is now usable for any type which needs
a *_set bool for indicating a valid value.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Linux kernel shows our "cmt" feature as "cqm". Let's mention the name in
the cpu_map.xml to make it easier to find.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since vhostuser type is really a tap that is just plugged into
different type of bridge, supporting QoS is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For instance, NET_TYPE_MCAST doesn't support setting QoS. Instead
of claiming success and doing nothing, we should be explicit
about that and report an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1427049
Use virStorageBackendCreateVolUsingQemuImg to apply the LUKS information
to the logical volume just created. As part of the processing of the
lvcreate command add 2MB to the capacity to account for the LUKS header
when it's determined that the volume desires to use encryption.
Refactor to extract out the LVCREATE command. This also removes the
need for the local @created since the error path can now only be reached
after the creation of the logical volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1490279
Turns out the virStorageBackendVolResizeLocal did not differentiate
whether the target volume was a LUKS volume or not and just blindly
did the ftruncate() on the target volume.
Follow the volume creation logic (in general) and create a qemu-img
resize command to resize the target volume for LUKS ensuring that
the --object secret is provided as well as the '--image-opts' used
by the qemu-img resize logic to describe the path and secret ensuring
that it's using the luks driver on the volume of course.
Since all that was really needed was a couple of fields and building
the object can be more generic, let's alter the args a bit. This will
be useful shortly for adding the secret object for a volume resize
operation on a luks volume that will need a secret object.
Rather than passing just the path, pass the virStorageVolDefPtr as we're
going to need it shortly.
Also fix the order of code and stack variables in the calling function
virStorageBackendVolResizeLocal.
Some globbing chars in the domain name could be used to break out of
apparmor rules, so lets forbid these when in virt-aa-helper.
Also adding a test to ensure all those cases were detected as bad char.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Don't leak @blockNodes in the loop.
==226576== 7,120 bytes in 60 blocks are definitely lost in loss record 122 of 125
==226576== at 0x4835214: calloc (vg_replace_malloc.c:711)
==226576== by 0x4950D7B: virAllocN (viralloc.c:191)
==226576== by 0x49EB5BB: virXPathNodeSet (virxml.c:676)
==226576== by 0x104DB67: virQEMUCapsLoadCPUModels (qemu_capabilities.c:3738)
==226576== by 0x105510D: virQEMUCapsLoadCache (qemu_capabilities.c:3929)
==226576== by 0x104459F: qemuTestParseCapabilities (testutilsqemu.c:498)
==226576== by 0x1040DC9: testQemuCapsCopy (qemucapabilitiestest.c:105)
==226576== by 0x1041F07: virTestRun (testutils.c:180)
==226576== by 0x1040B45: mymain (qemucapabilitiestest.c:181)
==226576== by 0x104320F: virTestMain (testutils.c:1119)
==226576== by 0x1041149: main (qemucapabilitiestest.c:193)
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Hot-adding disks does not parse the full XML to generate apparmor rules.
Instead it uses -f <PATH> to append a generic rule for that file path.
580cdaa7: "virt-aa-helper: locking disk files for qemu 2.10" implemented
the qemu 2.10 requirement to allow locking on disks images that are part of
the domain xml.
But on attach-device a user will still trigger an apparmor deny by going
through virt-aa-helper -f, to fix that add the lock "k" permission to the
append file case of virt-aa-helper.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When adding CPU usability blockers I forgot to properly free them when
in virDomainCapsCPUModelsDispose.
Reported-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The assumption so far was an average of 4 disks per guest.
But some architectures, like s390x, still often use plenty of smaller disks.
To include those in the considerations an assumption of an average of 10
disks is more reasonable.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The initial assumption was ~2 files per guest, but some common setups
like Openstack drive up to 4 files per guest.
E.g. on Arm where the following XML leads to 4 file handles:
<serial type='file'>
<source path='/var/lib/nova/instances/7c0dcd78-.../console.log'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='file'>
<source path='/var/lib/nova/instances/7c0dcd78-.../console.log'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
With that in mind and the target to support 4k guests by default we
should raise the limit to 16k.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
QEMU identified a race condition between the device state serialization
and the end of storage migration. Both QEMU and libvirt needs to be
updated to fix this.
Our migration work flow is modified so that after starting the migration
we to wait for QEMU to enter "pre-switchover", "postcopy-active", or
"completed" state. Once there, we cancel all block jobs as usual. But if
QEMU is in "pre-switchover", we need to resume the migration afterwards
and wait again for the real end (either "postcopy-active" or
"completed" state).
Old QEMU will just enter either "postcopy-active" or "completed"
directly, which is still correctly handled even by new libvirt. The
"pre-switchover" state will only be entered if QEMU supports it and the
pause-before-switchover capability was enabled. Thus all combinations of
libvirt and QEMU will work, but only new QEMU with new libvirt will
avoid the race condition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
VirutalBox has a IVRDEServerInfo structure available that
gives the effective runtime port that the VM is using when it's
running. This is useful when the "TCP/Ports" VBox property was set to
port range (e.g. via autoport = "yes" or via VBoxManage) in which
case it would be impossible to get the "active" port otherwise.
Originally autoport in vbox driver was setting the port to default value
(3389) which caused multiple VM instances use the same port. Since
libvirt XML does not allow to set port ranges, this patch changes the
"autoport" behavior to set VBox's "TCP/Ports" property to an arbitrary
port range (3389-3689) to avoid that issue.
The VBOX_SESSION_OPEN/CLOSE macros are only called in
_vboxDomainSnapshotRestore and they are unflexible because:
* assume the caller will have variable named "data"
* can only create Write lock type
As per above, it's not that hard to simply use the VBOX API directly.
When starting a domain with managed save image, we try to restore it
first. If the image is corrupted, we silently unlink it and just
normally start the domain. At this point the domain has no managed save
image, yet we did not reset the hasManagedSave flag.
https://bugzilla.redhat.com/show_bug.cgi?id=1460962
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
One of the usecases of iohelper is to read from pipe and write
to file with O_DIRECT. As we read from pipe we can have partial
read and then we fail to write this data because output file
is open with O_DIRECT and buffer size is not aligned.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of enumerating all states which need to be turned into
QEMU_DOMAIN_JOB_STATUS_FAILED (and failing to add all of them), it's
better to mention just the one which needs to be left alone.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Almost every failure in qemuMigrationRun while we are talking to QEMU
monitor results in a jump to exit_monitor label. The only exception is
removed by this patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The "ret" variable is used for storing the return value of a function
and should not be used as a temporary variable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Merge cancel and cancelPostCopy sections with the generic error section,
where we can easily decide whether canceling the ongoing migration is
required.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let cleanup only do things common to both failure and success paths and
move error handling code inside the new "error" section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some code which was supposed to be executed only when migration
succeeded was buried inside the cleanup code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new job state it's useful to let the compiler complain
about places where we need to think about what to do with the new
state.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We need to format alias even for inactive XMLs since that's the
way how users are going to identify their devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we will be allowing users to set device aliases and memory
devices are fragile when it comes to aliases we have to make sure
they won't change during migration. Other devices should be fine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They have to be unique within the domain. As usual, backwards
compatibility takes its price. In this particular situation we
have a device that is represented twice in a domain and so is its
alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If driver that is calling the parse supports user supplied
aliases, they can be parsed even for inactive XMLs. However, to
avoid any clashes with aliases that libvirt generates, the user
ones have to have "ua-" prefix.
Note, that some drivers don't have notion of device aliases at
all. Also, in order to support user supplied aliases some extra
checks need to be done (e.g. during hotplug). Therefore we can't
just enable this feature for all the drivers. Thus we need a flag
that drivers set to tell parsing code that they can handle user
supplied device aliases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When assigning alias to a device we usually iterate over other
devices of its kind trying to find next index. We do this by
stripping down the prefix and then parsing number at the end,
Usually, if the prefix doesn't match the one we are expecting, we
just continue with next iteration. Except for couple of
functions: qemuGetNextChrDevIndex(),
qemuAssignDeviceRedirdevAlias() and qemuAssignDeviceShmemAlias().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by 6094d6ec7f.
Found by running libvirt-perl tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function virEventRegisterImpl() checks the attempt to replace the
registered events. But there is a duplicate variable inside the IF statement.
The variable 'removeHandleImpl' was wrongly repeated. One of them needs to be
replaced by 'removeTimeoutImpl'.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All calls to qemuMonitorGetMigrationCapability in QEMU driver are
replaced with qemuMigrationCapsGet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Each time we need to check whether a given migration capability is
supported by QEMU, we call query-migrate-capabilities QMP command and
lookup the capability in the returned list. Asking for the list of
supported capabilities once when we connect to QEMU and storing the
result in a bitmap is much better and we don't need to enter a monitor
just to check whether a migration capability is supported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new function is called qemuProcessInitMonitor and it will enter/exit
the monitor so that the caller doesn't have to deal with this.
The goal of this patch is to simplify the code in qemuConnectMonitor
which would otherwise be a bit hairy after the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than a forward linked list, let's use the virHashTable in
order to manage the objsName data.
Requires numerous changes from List to Object management similar to
many other drivers/vir*obj.c modules
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the object definition and helpers to store security-related private
data for virStorageSources.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Introduce the bare necessities to add privateData to _virStorageSource.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When commit id 'da86c6c22' added support for diskPriv->encinfo in
qemuDomainSecretDiskPrepare a change to qemuDomainSecretDiskDestroy
to was missed. Although qemuDomainDiskPrivateDispose probably would
do the trick.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1495511
When creating new /dev for domain ran in namespace we try to
preserve all sub-mounts of /dev. Well, not quite all. For
instance if /dev/foo/bar and /dev/foo are both mount points, only
/dev/foo needs preserving. /dev/foo/bar is preserved with it too.
Now, to identify such cases like this one STRPREFIX() is used.
That is not good enough. While it works for [/dev/foo/bar;
/dev/foo] case, it fails for [/dev/prefix; /dev/prefix2] where
the strings share the same prefix but are in fact two different
paths. The solution is to use STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This function is going to make decisions based on the features
set per each driver. For that we need the virDomainXMLOption
object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's move all the virAsprintf()-s into separate functions for
better structure of the code. Later, when somebody wants to
generate a device alias, all they need is to expose the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have a special function for assigning aliases to RNG devices.
Use that instead of plain virAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It looks like the error message was copied from virsh, because
that's where we have @ctl. Nevertheless, it's @flags which is
invalid, not @ctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Back in the times of using 'pci_del', unplugging a device without
a PCI address was not wired up.
After completely removing support for qemu without QEMU_CAPS_DEVICE,
aliases are used to uniquely identify devices in all cases.
Remove the pointless validation of data that was already present
in the domain definition.
There are two more cases where we set an S390/CCW/PCI address
type based on the machine type.
Reuse qemuDomainEnsureVirtioAddress to reduce repetition.
Split out the common code responsible for reserving/assigning
PCI/CCW addresses for virtio disks into a helper function
for reuse by other virtio devices.
We pass the source.file to qemuCheckCCWS390AddressSupport for
the purpose of reporting an error message without actually checking
that the rng device is of type VIR_DOMAIN_RNG_BACKEND_RANDOM.
Change it to a hardcoded "rng" string, which also avoids
referring to the device by a host-side attribute.
There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line. That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to send allowReboot in the migration cookie to ensure the same
behavior of the virDomainSetLifecycleAction() API on the destination.
Consider this scenario:
1. On the source the domain is started with:
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
2. User calls an API to set "destroy" for <on_reboot>:
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
3. The guest is migrated to a different host
4a. Without the allowReboot in the migration cookie the QEMU
process on destination would be started with -no-reboot
which would prevent using the virDomainSetLifecycleAction() API
for the rest of the guest lifetime.
4b. With the allowReboot in the migration cookie the QEMU process
on destination is started without -no-reboot like it was started
on the source host and the virDomainSetLifecycleAction() API
continues to work.
The following patch adds a QEMU implementation of the
virDomainSetLifecycleAction() API and that implementation disallows
using the API if all actions are set to "destroy" because we add
"-no-reboot" on the QEMU command line. Changing the lifecycle action
is in this case pointless because the QEMU process is always terminated.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later on in implementation of new API
virDomainSetLifecycleAction(). In order to use it, we need to store
the value in status XML to not lose the information if libvirtd is
restarted.
If some guest was started by old libvirt where it was not possible
to change the lifecycle action for running guest, we can safely
detect it based on the current actions from the status XML.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Extract the required data inside a function instead of passing it
all as arguments.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit v3.8.0-95-gfd885a06a dropped nmodels parameter from several APIs
in src/cpu/cpu.h, but failed to update all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If we find ourselves in the situation that the 'add' uevent has been
fired earlier than the sysfs tree for a device was created, we should
use the best-effort approach and give kernel some predetermined amount
of time, thus waiting for the attributes to be ready rather than
discarding the device from our device list forever. If those don't appear
in the given time frame, we need to move on, since libvirt can't wait
indefinitely.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1463285
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we have a number of places where we workaround timing issues with
devices, attributes (files in general) not being available at the time
of processing them by calling usleep in a loop for a fixed number of
tries, we could as well have a utility function that would do that.
Therefore we won't have to duplicate this ugly workaround even more.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Adjust udevEventHandleThread to be a proper thread routine running in an
infinite loop handling devices. The handler thread pulls all available
data from the udev monitor and only then waits until a wakeup signal for
new incoming data has been emitted by udevEventHandleCallback.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch splits udevEventHandleCallback in two (introduces
udevEventHandleThread) in order to be later able to refactor the latter
to actually become a normal thread which will wait some time for the
kernel to create the whole sysfs tree for a device as we cannot do that
in the event loop directly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
udevSetupSystemDev only needs the udev data lock to be locked because of
calling udevGetDMIData which accesses some protected structure members,
but it can do that on its own just fine, no need to hold the lock the
whole time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The driver locks are unnecessary here, since currently the cleanup is
only called from the main daemon thread, so we can't race here. Moreover
@devs and @privateData are self-lockable objects, so no problem there
either.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since there's going to be a worker thread which needs to have some data
protected by a lock, the whole code would just simply get unnecessary
complex, since two sets of locks would be necessary, driver lock (for
udev monitor and event handle) and a mutex protecting thread-local data.
Given the future thread will need to access the udev monitor socket as
well, why not protect everything with a single lock, even better, by
converting the driver's private data to a lockable object, we get the
automatic object disposal feature for free.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We need to perform a sanity check on the udev monitor before every
use so that we know nothing has changed in the meantime. The reason for
moving the code to a separate helper is to enhance readability and shift
the focus on the important stuff within the udevEventHandleCallback
handler.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Even though hal doesn't make use of it, the privileged flag is related
to the daemon/driver rather than the backend actually used.
While at it, get rid of some tab indentation in the driver state struct.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a bunch of commentary blocks that were literally useless in
terms of describing what the code following them does, since most of
them were documenting "the obvious" or it just wouldn't help at all.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When formatting an inactive or migratable XML we will need to suppress
backing chain members which were detected from the disk to keep
semantics straight. This means we need to record, whether a
virStorageSource originates from autodetection.
The file object is needed when formatting the command line, but it makes
nesting of the objects less easy for use with blockdev. Separate the
wrapping into the 'file' object into a helper used specifically for disk
sources in the old code path.
Move qemuFreeKeywords into qemu_parse_command.c as
qemuParseKeywordsFree and call it rather than inline code
in multiple places.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Even though only family and model are used for matching CPUID data with
CPU models from cpu_map.xml, stepping is used by x86DataFilterTSX which
is supposed to disable TSX on CPU models with broken TSX support. Thus
we need to start parsing stepping from QEMU to make sure we don't
disable TSX on CPUs which provide working TSX implementation. See the
following patch for a real world example of such CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to a domain started with a host-model CPU which was
started by old libvirt that did not replace host-model with the real CPU
definition, libvirt replaces the host-model CPU with the CPU from
capabilities (because this is what the old libvirt did when it started
the domain). Without this patch libvirt could use features unknown to
QEMU in the CPU definition which replaced the original host-model CPU.
Such domain would keep running just fine, but any attempt to migrate it
will fail and once the domain is saved or snapshotted, restoring it
would fail too.
In other words whenever we want to use the CPU definition from host
capabilities as a guest CPU definition, we have to filter the unknown
features.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
Existing qemuParseCommandLineMem() will parse "-m 4G" format string.
This patch allows it to parse "-m size=8126464k,slots=32,maxmem=33554432k"
format along with existing format. And adds a testcase to validate the changes.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Hyper-V uses its own specific memory management so no mapping is going to
be perfect. However, it is more correct to map Limit to max_memory (it
really is the upper limit of what the VM may potentially use) and keep
cur_balloon equal to total_memory.
The typical value returned from Hyper-V in Limit is 1 TiB, which is not
really going to work if interpreted as "startup memory" to be ballooned
away later.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
The code was vulnerable to SQL injection. Likely not a security issue due to
WMI SQL and other constraints but still lame. For example:
virsh # dominfo \"
error: failed to get domain '"'
error: internal error: SOAP fault during enumeration: code 's:Sender', subcode
'n:CannotProcessFilter', reason 'The data source could not process the filter.
The filter might be missing or it might be invalid. Change the filter and try
the request again. ', detail 'The WS-Management service cannot process the
request. The WQL query is invalid. '
This commit fixes the Hyper-V driver by escaping all WMI SQL string parameters.
The same command with the fix:
virsh # dominfo \"
error: failed to get domain '"'
error: Domain not found: No domain with name "
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
"%s is not a Hyper-V server" is not a correct generalization of all possible
error conditions of hypervEnumAndPull. For example:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: localhost is not a Hyper-V server
This commit removes the general virReportError from hypervInitConnection and
also the "Invalid query" virReportError from hypervSerializeEprParam, which
does not correctly describe the error either (virBufferCheckError has
already set a meaningful error message at that point).
The same scenario with the fix:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: Transport error during enumeration: User, password or
similar was not accepted (26)
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.
Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.
This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.
This is assigned CVE-2017-1000256 / LSN-2017-0002
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
Gather query-cpu-definitions results and use them for testing CPU model
usability blockers in CPUID to virCPUDef translation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When decoding CPUID data to virCPUDef we need to be careful about using
a CPU model which cannot be directly used on the current host. Normally,
libvirt would notice the features which prevent the model from being
usable and it would disable them in the computed virCPUDef, but this
won't work in case the definition of the CPU model in QEMU contains more
features than what we have in cpu_map.xml. We need to count with the
usability blockers we got from QEMU and explicitly disable all of them
to make the computed virCPUDef usable.
https://bugzilla.redhat.com/show_bug.cgi?id=1464832
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This internal API can be used to find a specific CPU model in
virDomainCapsCPUModels list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The "preferred" parameter is not used by any caller of cpuDecode
anymore. It's only used internally in cpu_x86 to implement cpuBaseline.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All APIs which expect a list of CPU models supported by hypervisors were
switched from char **models and int models to just accept a pointer to
virDomainCapsCPUModels object stored in domain capabilities. This avoids
the need to transform virDomainCapsCPUModelsPtr into a NULL-terminated
list of model names and also allows the various cpu driver APIs to
access additional details (such as its usability) about each CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API makes a deep copy of a NULL-terminated string list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, if parsing of device info fails info->alias is freed.
It doesn't make much sense to leave the rest of the struct
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's one 'return' in the middle of the function body. It's
very easy to miss and so it makes adding new code harder. Also
the function doesn't follow our style 100%.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
In 0d3d020ba6 I've added capability to accept MAC addresses
for the API too. However, the implementation was faulty. It needs
to lookup the corresponding interface in the domain definition
and pass the ifname instead of MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id '8708ca01c' added a check to determine whether the NIC had
Switchdev capabilities; however, in doing so inadvertently would cause
network devices without a PCI device to not be added to the node device
database. Thus, network devices having a "computer" as a parent, such
as "net_lo*", "net_virbr*", "net_tun*", "net_vnet*", etc. were not added.
Alter the check to not even check for Switchdev bits if no PCI device found.
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's use the RWObjectLockable for the various list lock mgmt.
Only time need Write lock will be for Add/Remove logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
libvirtd throws unhandled signal 11 on ppc while running
virsh cpu-compare with missing model tag in the xml. This
patch errors out in such situation.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Parse the -M (or -machine) command line option before starting
processing in earnest and have a fallback ready in case it's not
present, so that while parsing other options we can rely on
def->os.machine being initialized.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1379218
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This commit fixes the deadlock introduced by commit
0980764dee. The call getgrouplist() of
the glibc library isn't safe to be called in between fork and
exec (see commit 75c125641a).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Fixes: 0980764dee ("util: share code between virExec and virCommandExec")
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
These functions are used by an upcoming commit.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Rename virDomainNumaDefCPUFormat to virDomainNumaDefCPUFormatXML,
matching its peer virDomainNumaDefCPUParseXML and the general
vir*{Format,Parse}XML conventions.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Generating libvirt packages per make rpm, "with-libxl=1" and "with-xen=1",
adds strict runtime dependencies per libxenlight for xen-libs package from
core libvirt-libs package. This is not necessary and unfortunate since
those dependencies set demand to "xen-libs" package even when there's no
need for libvirt xen or libxl driver components.
This patch is to have two separate xenconfig lib tool libraries: one for
core libvirt (without XL), and a another that contains xl for libxl driver
(libvirt_driver_libxl_impl.la) which when loading the driver, loads the
remaining symbols (xen{Format,Parse}XL. For the user/sysadmin, this means
the xen dependencies are moved into libxl driver, instead of core libvirt.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In preparation for privatizing the object, use the accessor to fetch
the obj->def instead of the direct reference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify virStoragePoolObjGetAutostartLink and
virStoragePoolObjGetConfigFile to return "const char *"
since that's how both are used and to ensure no one
tries to VIR_FREE the result.
To avoid any issues later on if paths ever change (unlikely but
possible) and to match the style of other generated rules the paths
of the static rules have to be quoted as well.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
libvirt allows spaces in vm names, there were issues in the past but it
seems not removed so the assumption has to be that spaces are continuing
to be allowed.
Therefore virt-aa-helper should not reject spaces in vm names anymore if
it is going to be refused causing issues then the parser or xml schema
should do so.
Apparmor rules are in quotes, so a space in a path based on the name works.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If users only specified vendor&product (the common case) then parsing
the xml via virDomainHostdevSubsysUSBDefParseXML would only set these.
Bus and Device would much later be added when the devices are prepared
to be added.
Due to that a hot-add of a usb hostdev works as the device is prepared
and virt-aa-helper processes the new internal xml. But on an initial
guest start at the time virt-aa-helper renders the apparmor rules the
bus/device id's are not set yet:
p ctl->def->hostdevs[0]->source.subsys.u.usb
$12 = {autoAddress = false, bus = 0, device = 0, vendor = 1921, product
= 21888}
That causes rules to be wrong:
"/dev/bus/usb/000/000" rw,
The fix calls virHostdevFindUSBDevice after reading the XML from
virt-aa-helper to only add apparmor rules for devices that could be found
and now are fully known to be able to write the rule correctly.
It uncondtionally sets virHostdevFindUSBDevice mandatory attribute as
adding an apparmor rule for a device not found makes no sense no matter
what startup policy it has set.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Skip purging the backing chain and redetecting it when it was not going
to change during the time we were not present.
The decision is based on the new flag which records whether there were
blockjobs running to the status XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently we don't do it. Therefore we accept senseless
combinations of models and buses they are attached to.
Moreover, diag288 watchdog is exclusive to s390(x).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For VMs with persistent config the config may change upon successful
completion of a job. Save it always if a persistent VM finishes a
blockjob. This will simplify further additions.
The status XML would be saved only for the copy job (in case of success)
or on failure even for other jobs. As the status contains the backing
chain data, which change after success we should always save it on
block job completion.
Checking of disk presence accesses storage on the host so it should be
done from the host setup function. Move the code to new function called
qemuProcessPrepareHostStorage and remove qemuDomainCheckDiskPresence.
