https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3
If the qemu monitor fails to remove the memory from the guest for
any reason, the auditlog message will incorrectly use the current
actual memory (via virDomainDefGetMemoryActual) instead of the
value we were attempting to reduce to. The result is the 'new-mem'
and 'old-mem' values for the auditlog message would be identical.
This patch creates a local 'newmem' which accounts for the current
memory size minus the memory which is being removed. NB, for the
success case this results in the same value that would be returned
by virDomainDefGetMemoryActual without the need to do the math. This
follows the existing code which would subtract the size for cur_balloon.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3
Prior to this patch, after successfully hot plugging memory
the audit log indicated that the update failed, e.g.:
type=VIRT_RESOURCE ... old-mem=1024000 new-mem=1548288 \
exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=pts/2 res=failed
This patch will adjust where virDomainAuditMemory is called to
ensure the proper 'ret' value is used based on success or failure.
Additionally, the audit message should include the size of the
memory we were attempting to change to rather than the current
actual size. On failure to add, the message showed the same value
for old-mem and new-mem.
In order to do this, introduce a 'newmem' local which will compute
the new size based on the oldmem size plus the size of memory we
are about to add. NB: This would be the same as calling the
virDomainDefGetMemoryActual again on success, but avoids the
overhead of recalculating. Plus cur_balloon is already adjusted
by the same value, so this follows that.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The ACS checks are meaningless when using the more modern VFIO driver
for device assignment since VFIO has its own more complete and exact
checks, but I didn't realize that when I added support for VFIO. This
patch eliminates the ACS check when preparing PCI devices for
assignment if VFIO is being used.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1256486
Older versions of glibc don't provide the setns() syscall
function wrapper, so we must define it ourselves to prevent
build failure on old distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When images are on mounted filesystems, there is no guarantee libvirtd
will start before they are mounted. Since we want to start after both
local and remote filesystems are mounted, we need to add both local-fs
and remote-fs as targets that should precede starting libvirtd service.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is a cryptographically signed message in MIME format.
Some UEFI firmwares may want to use a non-volatile memory to store some
variables.
If AppArmor is enabled, and NVRAM store file is set currently
virt-aa-helper does
not add the NVRAM store file to the template. Add this file for
read/write when
this functionality is defined in domain XML.
Signed-off-by: Peter Kieser <peter@kieser.ca>
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides. Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.
>From this patch you can add extra libvirt option to share
namespace in following way.
<lxc:namespace>
<lxc:sharenet type='netns' value='red'/>
<lxc:shareipc type='pid' value='12345'/>
<lxc:shareuts type='name' value='container1'/>
</lxc:namespace>
The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.
Co-authored: Daniel P. Berrange <berrange@redhat.com>
Commit f1f68ca334 overused mdir_name()
event though it was not needed in the latest version, hence labelling
directory one level up in the tree and not the one it should.
If anyone with SElinux managed to try run a domain with guest agent set
up, it's highly possible that they will need to run 'restorecon -F
/var/lib/libvirt/qemu/channel/target' to fix what was done.
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1253107
Make a call virCgroupGetBlkioWeight to re-read blkio.weight right
after it is set in order to keep internal data up-to-date.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit aa2cc7 modified a previously unnecessary but innocuous check
for interface IP address during interface update incorrectly, causing
all attempted updates (e.g. changing link state) to interfaces of
type='ethernet' for QEMU to fail.
This patch fixes the issue by completely removing the check for IP
address, which is pointless since QEMU doesn't support setting
interface IP addresses from the domain interface XML anyway.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
We will try to set the node to cpuset.mems without check if
it is available, since we already have helper to check this.
Call virNumaNodesetIsAvailable to check if node is available,
then try to change it in the cgroup.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Remove unused variable, tag unused parameter and adjust return type.
introduced by 3f48345f7e
CC security/libvirt_security_manager_la-security_selinux.lo
security/security_selinux.c: In function 'virSecuritySELinuxDomainSetDirLabel':
security/security_selinux.c:2520:5: error: return makes pointer from integer without a cast [-Werror]
security/security_selinux.c:2514:9: error: unused variable 'ret' [-Werror=unused-variable]
security/security_selinux.c:2509:59: error: unused parameter 'mgr' [-Werror=unused-parameter]
While a zero allocation in safezero should be fine it isn't when we use
posix_fallocate which returns EINVAL on a zero allocation.
While we could skip the zero allocation in safezero_posix_fallocate it's
an optimization to do it for all allocations.
This fixes vm installation via virtinst for me which otherwise aborts
like:
Starting install...
Retrieving file linux... | 5.9 MB 00:01 ...
Retrieving file initrd.gz... | 29 MB 00:07 ...
ERROR Couldn't create storage volume 'virtinst-linux.sBgds4': 'cannot fill file '/var/lib/libvirt/boot/virtinst-linux.sBgds4': Invalid argument'
The error was introduced by e30297b0 as spotted by Chunyan Liu
We forbid access to /usr/share/, but (at least on Debian-based systems)
the Open Virtual Machine Firmware files needed for booting UEFI virtual
machines in QEMU live in /usr/share/ovmf/. Therefore, we need to add
that directory to the list of read only paths.
A similar patch was suggested by Jamie Strandboge <jamie@canonical.com>
on https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1483071.
First check overrides, then read only files then restricted access
itself.
This allows us to mark files for read only access whose parents were
already restricted for read write.
Based on a proposal by Martin Kletzander
The output of that function was not tested until now. In order to keep
the paths in /tmp, the test driver config is "fixed" as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.). The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
SELinux security driver already does that, but DAC driver somehow missed
the memo. Let's fix it so it works the same way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In virSecuritySELinuxSetSecurityChardevLabel() we are labelling unix
socket path, but accessing another structure of the union. This does
not pose a problem currently as both paths are at the same offset, but
this should be fixed for the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that we have virNetDaemon object holding all the data and being
capable of referencing multiple servers, having a duplicate reference to
a single server stored in virLockDaemon isn't necessary anymore. This
patch removes the above described element.
JSON data that are used to initialize tests in virnetdaemontest should
be in a consistent format, i.e. not using tabs for indentation, those
should be replaced by spaces.
While the check is appropriate for eg. the x86 and generic drivers,
there are some valid ppc64 guest configurations where the CPU
model is supposed to be NULL.
Moving this check from the generic code to the drivers makes it
possible to accomodate both use cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
Not all combinations of host CPU models and compatibility modes
are valid, so we need to make sure we don't try to do something
that QEMU will reject.
Moreover, we need to apply a different logic to guests using
host-model and host-passthrough modes when testing them for host
compatibility.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
If a guest CPU is defined using
<cpu mode='host-model'/>
the <model> sub-element will contain the compatibility mode to use.
That means we can't just copy the host CPU model on cpuUpdate(),
otherwise we'll overwrite that information and migration of such
guests will fail.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1251927
Commit a2c5d16a70 switched to generating
libvirt_admin.syms, but forgot to add the generated file into
.gitignore, hence causing tree pollution post-build.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since iothreadid = 0 is invalid, we need to check for it when attempting
to add a disk; otherwise, someone would think/believe their attempt to
add an IOThread to the disk would succeed. Luckily other code ignored
things when ->iothread == 0...
Since we're linking this into libvirtd we need some symbols to be public
but not part of the public API so mark them as
LIBVIRT_ADMIN_PRIVATE_<VERSION> as we do with libvirt.
Making all other symbols local makes sure we don't accidentally leak
unwanted ones.
Commit 89c509a0 added getters for cgroup block device I/O throttling,
however stub versions of these functions have not matching function
prototypes that result in compilation fail on platforms not supporting
cgroup.
Fix build by correcting prototypes of the stubbed functions.
Pushing under build-breaker rule.
The problem here is that there are some values that kernel accepts, but
does not set them, for example 18446744073709551615 which acts the same
way as zero. Let's do the same thing we do with other tuning options
and re-read them right after they are set in order to keep our internal
structures up-to-date.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165580
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The problem here is that there are some values that kernel accepts, but
does not set them, for example 18446744073709551615 which acts the same
way as zero. Let's do the same thing we do with other tuning options
and re-read them right after they are set in order to keep our internal
structures up-to-date.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This function translates device paths to "major:minor " string, and all
virCgroupSetBlkioDevice* functions are modified to use it. It's a
cleanup with no functional change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function takes string list and returns first string in that list
that starts with the @prefix parameter with that prefix being skipped as
the caller knows what it starts with (also for easier manipulation in
future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
