We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.
While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD. That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.
Fixes: 5b9819eedc domain capabilities: Expose firmware auto selection feature
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a test case for the TPM XML encryption parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an already existing test case tpm-emulator-tpm2 to qemuxml2xmltest.c
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It mirrors the existing DO_TEST_CAPS_ARCH_LATEST_FULL(), and is
now used to implement DO_TEST_CAPS_ARCH_VER().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure the order is consistent between xml2argv and xml2xml,
and make room for more macros that are going to be introduced
shortly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Demostrate DO_TEST_CAPS_ARCH_LATEST by converting the test case
'aarch64-os-firmware-efi'
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* genid
* genid-auto
This ensures the test infrastructure is working as expected for
a test case with explicit -active and -inactive XML test data
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert these test cases to use DO_TEST_CAPS_LATEST
* virtio-transitional
* virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the same pattern that is used in qemuxml2argvtest, setting the
name in a static testQemuInfo instance inside the test macros
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make all users of GIC_X use ARG_GIC explicitly, and drop the
required gic parameter from DO_TEST_FULL
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
No functional change, just replacing the old custom infrastructure
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The qemuxml2xml testInfo is now just a subset of testQemuInfo, so it's
a drop in replacement
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reuse info->outfile for it. This requires us to set paths before
each virTestRun invocation
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just renamed from existing inName and outActiveName
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These will need to be separate to share testInfo with qemuxml2argv
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1693066
Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current location looks very arbitrary. Move it to the end of
the mymain() function so it is less confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block job related data will be stored in a has table and formatted into
the status XML. Use the mock to guarantee stable tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1564270
Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.
At the same time, introduce bunch of tests to test the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In qemuxml2xmltest, both activeVcpus and blockjobs members
of the testInfo struct have been entirely unused ever since
commit d1a7fc8bb3.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the rng->model == VIRTIO check to parse time. This also
allows us to remove similar checks throughout the qemu driver
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.
This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add markers for allowing test debugging if one of the steps fails
without setting a proper error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few qemuxml2xml tests for virtio-input devices are
missing the capabilities used for the corresponding
qemuxml2argv tests: this wasn't a problem until now
because capabilities were only checked at command line
generation time, but we're going to change that later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SKIP_OSTYPE_CHECKS only hides some error reporting at this point,
so it can be foled into SKIP_VALIDATE
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
