Add support for sending one FD from the client along with a monitor
command so that it's possible to use 'getfd' and 'add-fd' to use FDs
passed from the client with other QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This API has the same semantics as 'virDomainQemuMonitorCommand' but
accepts file descriptors which are then forwarded to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper splits out the clearing of the FDs transacted inside a
virNetMessage.
APIs transacting FDs both from and to the client at the same time will
need to clear the FDs stored in virNetMessage as the structure is
re-used for the reply and without clearing the list of FDs we'd return
the FDs sent by the client in addition to the new FDs sent by the API.t
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainPrepareDiskSourceData' propagates 'detect_zeroes' only for
the disk source image, but the mirror destination has the ambition to
replace the disk source when the job is finished, so we need to
propagate the 'detect_zeroes' setting also in that case.
Unfortunately it would become very hairy to either set 'disk->mirror'
sooner or propagate that we want this done into
'qemuDomainPrepareDiskSourceData', so the most straightforward solution
is to do the propagation inside 'qemuDomainBlockCopyCommon'.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It makes no sense to have 'started' variable in the
libxlDomainJobObj as the same one is already in virDomainJobData,
but never used.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the 'nvram_template' entry is mandatory when parsing the
firmware descriptor based on flash. QEMU is extending the firmware
descriptor spec to make the 'nvram_template' optional, depending
on the value of a new 'mode' field:
- "split"
* "executable" contains read-only CODE
* "nvram_template" contains read-write VARS
- "combined"
* "executable" contains read-write CODE and VARs
* "nvram_template" not present
- "stateless"
* "executable" contains read-only CODE and VARs
* "nvram_template" not present
In the latter case, the guest OS can write vars but the
firmware will make no attempt to persist them, so any changes
will be lost at poweroff.
For now we parse this new 'mode' but discard any firmware
which is not 'mode=split' when matching for a domain.
In the tests we have a mixture of files with and without the
mode attribute.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When undefining a VM, we must optionally delete any NVRAM that might
exist. When using firmware auto-select we always check the generated
path, ignoring any user specified path.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 4e42686ade wrongly assumed how g_variant_new_parsed() works and broke
starting of domains on systems with systemd (machined).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After v8.0.0-466-g08101bde5d we unconditionally regenerate per
domain NVRAM path even though it might have been parsed earlier
from domain XML. The way we do that leads to a memleak:
43 bytes in 1 blocks are definitely lost in loss record 330 of 682
at 0x483F7E5: malloc (vg_replace_malloc.c:381)
by 0x50D5B18: g_malloc (in /usr/lib64/libglib-2.0.so.0.7000.2)
by 0x50EFA4F: g_strdup (in /usr/lib64/libglib-2.0.so.0.7000.2)
by 0x49E774E: virXPathString (virxml.c:88)
by 0x4A3F0E4: virDomainDefParseBootLoaderOptions (domain_conf.c:18226)
by 0x4A3F49C: virDomainDefParseBootOptions (domain_conf.c:18298)
by 0x4A448C3: virDomainDefParseXML (domain_conf.c:19598)
by 0x4A487A1: virDomainDefParseNode (domain_conf.c:20404)
by 0x117FCF: testCompareXMLToArgv (qemuxml2argvtest.c:726)
by 0x142124: virTestRun (testutils.c:142)
by 0x1423D4: virTestRunLog (testutils.c:197)
by 0x140A76: mymain (qemuxml2argvtest.c:3406)
If we parsed NVRAM path from domain XML we must refrain from
generating new path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In case when a user starts a block copy operation with
VIR_DOMAIN_BLOCK_COPY_SHALLOW and VIR_DOMAIN_BLOCK_COPY_REUSE_EXT and
both the reused image and the original disk have a backing image libvirt
specifically does not insert the backing image until after the job is
asked to be completed via virBlockJobAbort with
VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT.
This is so that management applications can copy the backing image on
the background.
Now when a user aborts the block job instead of cancelling it we'd
ignore the fact that we didn't insert the backing image yet and the
cancellation would result into a 'blockdev-del' of a invalid node name
and thus an 'error' severity entry in the log.
To solve this issue we use the same conditions when the backing image
addition is avoided to remove the internal state for them prior to the
call to unplug the mirror destination.
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building the default memory backend (which has id='pc.ram')
and no guest NUMA is configured then
qemuBuildMemCommandLineMemoryDefaultBackend() is called. However,
its return value is ignored which means that on invalid
configuration (e.g. when non-existent hugepage size was
requested) an error is reported into the logs but QEMU is started
anyway. And while QEMU does error out its error message doesn't
give much clue what's going on:
qemu-system-x86_64: Memory backend 'pc.ram' not found
While at it, introduce a test case. While I could chose a nice
looking value (e.g. 4MiB) that's exactly what I wanted to avoid,
because while such value might not be possible on x84_64 it may
be possible on other arches (e.g. ppc is notoriously known for
supporting wide range of HP sizes). Let's stick with obviously
wrong value of 5MiB.
Reported-by: Charles Polisher <chas@chasmo.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is to make it explicit that the template only applies to the NVRAM
store, not the main loader binary, even if the loader is writable.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Before creating a NVRAM path, the qemuDomainNVRAMPathGenerate
method checks whether the config is using the old style
firmware approach. This check is redundant in one of the two
callers. By inlining the check into the other caller, it makes
it clearer to understand that the NVRAM path filling is done
conditionally.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt-guests script/service can operate on various URIs and we do
support both socket activation and traditional services, the ordering should be
specified for all the possible sockets and services.
Also remove the Wants= dependency since do not want to start any service. We
cannot know which one libvirt-guests is configured, so we'd have to start all
the daemons which would break if unused colliding services are not
masked (libvirtd.service in the modular case and all the modular daemon service
units in the monolithic scenario). Fortunately we can assume that the system is
configured properly to start services/sockets that are of interest to the user.
That also works with the setup described in https://libvirt.org/daemons.html .
To make it even more robust we add the daemon service into the machine units
created for individual domains as it was missing there.
https://bugzilla.redhat.com/show_bug.cgi?id=1868537
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are some enums that are declared in qemu_monitor.h but
implemented in qemu_monitor_json.c. While from compiler and
linker POV it doesn't matter, the code is cleaner if an enum is
implemented in .c file that corresponds to .h file which declared
the enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Using the following spatch, I've identified two places which
could be switched from explicit virDomainObjIsActive() +
virReportError() to virDomainObjCheckActive():
@@
expression dom;
@@
if (
- !virDomainObjIsActive(dom)
+ virDomainObjCheckActive(dom) < 0
) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s", _("domain is not running"));
...
}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend flags parameter of virDomainStartDirtyRateCalc as a
superset of virDomainDirtyRateCalcFlags, parse the flags and
handle it correspondingly in qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add mode parameter to qemuDomainStartDirtyRateCalc API, 'mode'
option of 'calc-dirty-rate' command was introduced since
qemu >= 6.2.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainDirtyRateCalcFlags to get ready for
adding mode parameter to qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probing QEMU_CAPS_CALC_DIRTY_RATE capability in advance
in case of failure when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit cc2a3c2a94 missed one case in the libxl driver where virDomainDef
is returned from libxlDomainSaveImageOpen and a g_steal_pointer is needed.
Without it, the virDomainDef object is freed and the driver crashes later
in the restore process when accessing the object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The systemd version in RHEL-7 lacked support for the LISTEN_FDNAMES env
variable with socket activation. Since we stopped targetting RHEL-7 we
can drop some considerable amount of compatibility code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All APIs using FD passing have this check to prevent sending a
'VIR_NET_CALL_WITH_FDS' to an older daemon but
virDomainCreateXMLWithFiles was missing it.
Now the LXC driver was historically not exposing
VIR_DRV_FEATURE_FD_PASSING, but that is not a problem as LXC always goes
through the remote driver which intercepts it and injects
VIR_DRV_FEATURE_FD_PASSING when it was implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The feature implies that fd passing works with RPC. Non-remote impls
thus should always report support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The fix was on RPC level so everything should advertise it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This was a lockout to make strings in typed parameters compatible with
versions which didn't have them. Now all drivers need to expose this
capability.
This namely enables it for 'esx' and 'vz' drivers, while they don't seem
to be implementing any parameters for now, they might later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
They are features of the RPC; drivers must say that it's not supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
keepalive is a RPC feature, drivers must say that it's not supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
VIR_DRV_FEATURE_REMOTE is a special flag which is asserted only when the
connection is remote. All drivers implementing it must return 0 for it
to work. Handle it in the global handler and add a comment why.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'virDrvFeature' has a combination of features which are asserted by
the specific driver and features which are actually global.
In many cases the implementation was cargo-culted into newer drivers
without re-assesing whether it makes sense.
This patch introduces a global function which will specifically handle
these global flags and defer the rest to the driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The destination daemon would crash in Finish phase due to NULL
dereference which I missed in my review of commit
v8.0.0-428-g0301db44e2
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainSnapshotForEachQcow2Raw' doesn't properly handle the
'VIR_DOMAIN_SNAPSHOT_LOCATION_NONE' setting and thus doesn't skip disks
which were excluded from the snapshot due to being read-only.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When installing openrc init scripts, we take whatever mode the
generated files are in an copy them under /etc/init.d/. This is
not ideal, because those files are not executable and they should
be.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/250
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This transition will make it easier for me to generalize jobs in
the future as they will always use virDomainJobData and
virDomainJobInfo will be only used in the public api..
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We only need to set statsType in almost every case of setting
something from private data, so it seems unnecessary to pull
privateData out of current / completed job for just this one
thing every time. I think this patch keeps the code cleaner
without variables used just once.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch includes:
* introducing new files: src/hypervisor/domain_job.c and src/hypervisor/domain_job.h
* new struct virDomainJobData, which is almost the same as
qemuDomainJobInfo - the only differences are moving qemu specific
job stats into the qemuDomainJobDataPrivate and adding jobType
(possibly more attributes in the future if needed).
* moving qemuDomainJobStatus to the domain_job.h and renaming it
as virDomainJobStatus
* moving and renaming qemuDomainJobStatusToType
* adding callback struct virDomainJobDataPrivateDataCallbacks
taking care of allocation, copying and freeing of private data
of virDomainJobData
* adding functions for virDomainJobDataPrivateDataCallbacks for
qemu hypervisor
* adding 'public' (public between the different hypervisors) functions
taking care of init, copy, free of virDomainJobData
* renaming every occurrence of qemuDomainJobInfo *info to
virDomainJobData *data
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't want to be dealing with real FDs thus we mock
'qemuMonitorIOWriteWithFD' to do the same thing as when no FD is being
passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to mock the SCM_RIGHTS sendmsg to simulate sending
filedescriptors to fake qemu in tests we need access to some fields of
'struct _qemuMonitor'. Move its declaration to the private header file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the declaration of the struct into 'qemu_monitor_priv.h' as other
code has no business in peeking into the monitor messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fields are no longer used since we've deleted support for HMP-only
qemus. The HMP command pass-through works via a QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit dc481f11a6 which converted the function generating properties
for disk '-device' argument to JSON removed the only other use of
qemuBuildDiskFrontendAttributeErrorPolicy, so we can now inline it into
qemuBuildDriveStr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 'cancel_path' is constructed from the 'tpmdev' argument, we can
push it down into the function opening the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'path' inside the loop which fills it and return the
values directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
