IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't support any qemu which would support the 'virtio-s390'
addressing, thus we can drop all code related to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the code in the last two instances in the code to behave as if
the flag is not asserted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_S390 can never be asserted any more, add an explicit
check that will reject the 'virtio-s390' address type and remove the
code which would auto-fill them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices no longer exist in qemu since the 2.6 release. Drop the
probing of the device properties and fix the data for
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU commit 7b3fdbd9a826791bd98e649cf44c0a6129a44179 released in 2.6
dropped the legacy s390 virtio machine and it's devices. Remove our
probing based on the devices.
The probing of properties of the appropriate devices will be removed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainDefAddDefaultDevices skipped adding the memballoon for the
's390-virtio' machine type, but since it was removed in qemu 2.6 we can
remove the hack now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsProbeQMPMachineProps currently skips any not supported
machine type which includes `none` as well.
In order to start probing that machine type we need to add an exception
to not skip it when probing QEMU capabilities.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In libvirt we already use `query-command-line-options` QMP command but
that is useless as it doesn't provide correct data for `-machine`
option. So we need a new and better way to get that data.
We already use `qom-list-properties` to get options for specific machine
types so we can reuse it to get options for special `none` machine type
as a generic arch independent machine type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing domain specific about NUMA interconnects. Rename
the virDomainNumaInterconnect* structures and enums to
virNumaInterconnect*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's nothing domain specific about NUMA memory caches. Rename the
virDomainCache* structures and enums to virNumaCache*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When using firmware auto-selection and user enables AMD SEV-ES we need
to pick correct firmware that actually supports it. This can be detected
by having `amd-sev-es` in the firmware JSON description.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now we have everything prepared so that @model doesn't have to be
rewritten. The correct model can be chosen right from the
beginning.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We want to call qemuBuildVirtioDevStr() from
qemuBuildDeviceVideoStr() but only for some models (currently
"virtio-gpu" and "vhost-user-gpu"), not all of them. Move this
logic into qemuDeviceVideoGetModel() because this logic will be
refined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This may look like a step backwards, but it isn't. The point is
that in near future the chosen model will depend on more than
just video type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This may look like a step backwards, but it isn't. The point is
that in near future the chosen model will depend on more than
just video type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is the same check written twice (whether given video card
is primary one and whether it supports VGA mode). Write it just
once and store it in a boolean variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code that decides video card model is going to be reworked
and expanded. Separate it out into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function doesn't modify passed video definition. Make the
argument const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU 6.1 will replace the virgl property of virtio-vga device to
virtio-vga-gl device. Adapt to that update.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/167
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 6.1 will add virtio-gpu-gl-pci device to replace the virgl property
of virtio-gpu-pci device. Adapt to that change.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1967356
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The devices virtio-gpu-gl-pci and virtio-vga-gl, aimed to replace the
virgl property, are valid for 3d accerlation as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag will be used for the device virtio-gpu-gl-pci which is introduced
since QEMU 6.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "spawnDaemon" and "binary" parameters are co-dependant, with the
latter non-NULL, if-and-only-if the former is true. Getting rid of the
"spawnDaemon" parameter simplifies life for the callers and eliminates
an error checking scenario.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libacl is Linux-only, so we don't need to explicitly check for
either the target platform or header availability, and we can
simply rely on cc.find_library() instead. The corresponding
preprocessor define is renamed to more accurately reflect the
nature of the check.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_DOMAIN_DISK_PRIVATE(disk)->transientOverlayCreated flag
gets true unexpectedly on qemuProcessSetupDisksTransientSnapshot() when
the disk has <transient shareBacking='yes'> option.
The flag should be enabled on qemuDomainAttachDiskGeneric() after the
overlay setup is completed.
Skip enabling transientOverlayCreated for the disk here.
Fixes: 75871da0ec
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When <transient shareBacking='yes'> is set to a disk and the overlay
disk already exists because of something abnormal, libvirt is terminated
by Segmentation fault.
# virsh start Test0
error: Disconnected from qemu:///system due to end of file
error: Failed to start domain 'Test0'
error: End of file while reading data: Input/output error
Add NULL check for snapdiskdef so that the rollback can work correctly.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Fixes: 2e94002d2a
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
and re-adjust if the hotplug fails.
This fixes a bug found during testing of
https://bugzilla.redhat.com/1939776, which was supposed to be resolved
by commit 98e22ff749, but failed to account for the case of device
hotplug.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
An upcoming patch will be checking if the addition of a new net device
requires adjusting the domain locked memory limit, which must be done
prior to sending the command to qemu to add the new device. But
qemuDomainAdjustMaxMemLock() checks all (and only) the devices that
are currently in the domain definition, and currently we are adding
new net devices to the domain definition only at the very end of the
hotplug operation, after qemu has already executed the device_add
command.
In order for the upcoming patch to work, this patch changes
qemuDomainAttachNetDevice() to add the device to the domain nets list
at an earlier time. It can't be added until after PCI address and
alias name have been determined (because both of those examine
existing devices in the domain to figure out a unique value for the
new device), but must be done before making the qemu monitor call.
Since the device has been added to the list earlier, we need to
potentially remove it on failure. This is done by replacing the
existing call to virDomainNetRemoveHostdev() (which checks if this is
a hostdev net device, and if so removes it from the hostdevs list,
since it could have already been added to that list) with a call to
the new virDomainNetRemoveByObj(), which looks for the device on both
nets and hostdevs lists, and removes it where it finds it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have many places where the earliest error returns from a function
skip any cleanup label at the bottom (the assumption being that it is
so early in the function that there isn't yet anything that needs to
be explicitly undone on failure). But in general it is a bad sign if
there are any direct "return" statements in a function at any time
after there has been a "goto cleanup" - that indicates someone thought
that an earlier point in the code had done something needing cleanup,
so we shouldn't be skipping it.
There were two occurences of a "return -1" after "goto cleanup" in
qemuDomainAttachDeviceNet(). The first of these has been around for a
very long time (since 2013) and my assumption is that the earlier
"goto cleanup" didn't exist at that time (so it was proper), and when
the code further up in the function was added, the this return -1 was
missed. The second was added during a mass change to check the return
from qemuInterfacePrepareSlirp() in several places (commit
99a1cfc438); in this case it was erroneous from the start.
Change both of these "return -1"s to "goto cleanup". Since we already
have code paths earlier in the function that goto cleanup, this should
not cause any new problem.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuDomainAttachDiskGeneric will also be used on startup for
transient disks which share the overlay. The VM startup code passes the
asyncJob around so we need to pass it into qemuDomainAttachDiskGeneric.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add code which creates the transient overlay after hotplugging the disk
backend before attaching the disk frontend.
The state of the topmost image is modified to be already read-only to
prevent the need to open the image in read-write mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Split up the monitor contexts to attach the backend of the disk and the
frontend device in preparation for hotplugging transient disks where
we'll need to add the code for adding the transient overlay between
these two steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modify the rollback section to use its own monitor context so that we
can later split up the hotplug into multiple steps and move the
detachment of the extension device into the rollback section rather than
doing it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similarly to previous refactors we want to move all hotplug related
setup which isn't strictly relevant to attaching the disk into
qemuDomainAttachDeviceDiskLiveInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the 'ret' variable and 'cleanup' label in favor of directly
returning the value since we don't have anything under the 'cleanup:'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove two empty lines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the auditing entry and insertion into the disk definition from the
function which deals with qemu to 'qemuDomainAttachDeviceDiskLiveInternal'
which deals with the hotplug related specifics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuDomainAttachDeviceDiskLiveInternal already sets up certain pieces of
the disk definition so it's better suited to move the setup of the
virStorageSource structs, granting access to the storage and allocation
of the alias from qemuDomainAttachDiskGeneric which will be just
handling the qemu interaction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can call it in one place as all per-device-type subcases use the same
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the validation of the SCSI device address and the attachment of the
controller into qemuDomainAttachDeviceDiskLiveInternal as there's no
specific need for a special helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the specific device setup and address reservation code into the
main hotplug helper as it's just one extra function call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the specific device setup and address reservation code into the
main hotplug helper as it's just one extra function call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Unify the handling of the copy-on-read filter by changing the handling
to use qemuBlockStorageSourceChainData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fill in the required fields in qemuBlockStorageSourceChainData to handle
the hotplug so that we can simplify the cleanup code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuBlockStorageSourceChainData encapsulates the backend of the disk for
startup and hotplug operations. Add the handling for the copy-on-read
filter so that the hotplug code doesn't need to have separate cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Pre-extending the disk array size is pointless nowadays since we've
switched to memory APIs which don't return failure.
Switch all uses of reallocation of the array followed by
'virDomainDiskInsertPreAlloced' with direct virDomainDiskInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can skip the formatting of the bootindex for floppies directly at the
place where it's being formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The logic assigning the bootindices from the legacy boot order
configuration was spread through the command line formatters for the
disk device and for the floppy controller.
This patch adds 'effectiveBootindex' property to the disk private data
which holds the calculated boot index and moves the logic of determining
the boot index into 'qemuProcessPrepareDomainDiskBootorder' called from
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Later patches will implement sharing of the backing file, so we'll need
to be able to discriminate the overlays per VM.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code deals with the startup of the VM and just uses the snapshot
code to achieve the desired outcome.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We store the virQEMUDriverConfig object in the context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove all the arguments which are present in qemuSnapshotDiskContext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The config is used both with the preparation and execution functions, so
we can store it in the context to simplify other helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than filling various parts of the context from arguments pass in
the whole context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Creating the overlay for the disk is needed when starting a new VM only.
Additionally for now migration with transient disks is forbidden
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code will be later reused when adding support for sharing the
backing image of the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They were added mostly randomly and we don't really want to keep working
around of false positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit <1b22dd6dd44202094e0f78f887cbe790c00e9ebc>.
First of all, the reverted commit is incomplete. It only sets
cpuset.mems in the VM root cgroup when the API is used but there is no
code that would do the same when the VM is started.
Libvirt never places any process into the VM root cgroup directly. All
the supporting processes like slirp-helper or dbus-daemon are placed
into the emulator sub-cgroup and all the QEMU threads are distributed
between emulator, vcpu* and iothread* sub-cgroups. The scenario
described in the reverted commit can happen only if someone manually
adds any process there which we should not care about.
If we would like to set the limit in the VM root cgroup we need to
introduce better logic:
- set both (old and new) numa group in the VM root cgroup
- change the numa group in all sub-cgroups to new value
- finally set only the new value in the VM root cgroup
The simplest fix now is to revert the commit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The description of the function says that the return value is a
file descriptor on success and negative errno on failure which is
not true. If the 'if' case with check on security labels fails,
the return value is -1 not -errno. The solution is to return
'-EINVAL' instead.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously, nvram file was created with user/group owner as
'root', rather than specifications defined in libvirtd.conf. The
solution is to call qemuDomainOpenFile(), which creates file with
defined permissions and qemuSecurityDomainSetPathLabel() to set
security label for created nvram file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1783255
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When building a commandline for a DIMM memory device with
non-default access mode, the qemuBuildMemoryBackendProps() will
tell QEMU to allocate memory from per-domain memory backing dir.
But later, when preparing the host, the
qemuProcessNeedMemoryBackingPath() does not check for memory
devices at all resulting in per-domain memory backing dir not
being created which upsets QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961114
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We do not need to look for a suitable binary in the vhost-user
description files, if we aren't the ones starting it.
Otherwise startup will fail with:
error: Failed to start domain 'vm1'
error: operation failed: Unable to find a satisfying virtiofsd
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU gained support for 'win-dmp' format in it's release of 3.0,
but libvirt doesn't implement it yet. Fortunately, there not much
needed: new value to virDomainCoreDumpFormat public enum, which
unfortunately means that QEMU driver has to be updated in the
same commit, because of VIR_ENUM_IMPL().
Luckily, we don't need any extra QEMU capability - the code
already checks supported formats via
'query-dump-guest-memory-capability' just before issuing
'dump-guest-memory'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The aim of this function is to return whether domain definition
and/or memory device that user intents to hotplug needs a private
path inside cfg->memoryBackingDir. The rule for the memory device
that's being hotplug includes checking whether corresponding
guest NUMA node needs memoryBackingDir. Well, while the rationale
behind makes sense it is not necessary to check for that really -
just a few lines above every guest NUMA node was checked exactly
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The aim of qemuProcessNeedHugepagesPath() is to return whether
guest needs private path inside HugeTLBFS mounts (deducted from
domain definition @def) or whether the memory device that user is
hotplugging in needs the private path (deducted from the @mem
argument). The actual creation of the path is done in the only
caller qemuProcessBuildDestroyMemoryPaths().
The rule for the first case (@def) and the second case (@mem) is
the same (domain has a DIMM device that has HP requested) and is
written twice. Move the logic into a function to deduplicate the
code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of b4cbdbe90b (and friends) the
minimal QEMU version required is 2.11.0. Let's update our
QEMU_MIN_* macros to reflect that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When fetching the value of a private secret, we need to use an elevated
identity otherwise the secret driver will deny access.
When using the modular daemons, the elevated identity needs to be active
before the secret driver connection is opened, and it will apply to all
APIs calls made on that conncetion.
When using the monolithic daemon, the identity at time of opening the
connection is ignored, and the elevated identity needs to be active
precisely at the time the virSecretGetValue API call is made.
After acquiring the secret value, the elevated identity should be
cleared.
This sounds complex, but is fairly straightfoward with the automatic
cleanup callbacks.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When QEMU introduces new firmware features libvirt will fail until we
list that feature in our code as well which doesn't sound right.
We should simply ignore the new feature until we add a proper support
for it.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
In addition the capability wasn't even used to gate any functionality
except for reporting the presence in the domain capabilities XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemus have it, there isn't an elegant way to detect it and
it's unlikely to be ever removed on purpose.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'query-commandline-options' never returned 'vmport' but we can detect it
in the list of supported object types. This removes it from all non-x86
originating test data as it's platform specific.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is no longer asserted. Remove the checks related to it and
make the code work properly with QEMU_CAPS_DEVICE_INTEL_IOMMU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported QEMU versions now support query-qmp-schema. In the future
it will be possible to use the output of query-qmp-schema to also detect
commands reliably.
Since we are at the point where we have the least amount of .replies
files needing changing for a long time, move the 'query-qmp-schema' bits
before 'query-commands' to prepare for the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modern code uses QMP schema to query for active commit support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modern code uses QMP schema to query for supported event types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions have 'query-qmp-schema' so we can remove the
check whether it exists and all logic conntected to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
