Note that the wrong "VIR_TRISTATE_*_ABSENT" was used in qemuDomainChangeNet.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
* cross-building container images are smaller because they
no longer include the native compilers;
* ccache is enabled for clang builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Coverity reported that this function can return NULL, so it should be
handled properly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently virMediatedDeviceGetIOMMUGroupDev() looks up the iommu group
number and uses that to construct a path to the iommu group device.
virMediatedDeviceGetIOMMUGroupNum() then uses that device path and takes
the basename to get the group number. That's unnecessary extra string
manipulation for *GroupNum(). Reverse the implementations and make
*GroupDev() call *GroupNum().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virMediatedDeviceGetSysfsPath() (via g_strdup_printf()) is guaranteed to
return a non-NULL value, so remove the unnecessary checks for NULL.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fixes: 8fe30b2167
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Over several years of debugging reports related to VM shutdown, destruction,
and cleanup, I've found that logging of all events received from libxl and
logging the entry of libxlDomainCleanup has proven useful. Add the these
debug messages upstream to aid in future debugging.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.
As it turns out, it may help management application find matching
disk in their internals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When running on systemd host the cgroup itself is removed by machined
so when we reach this code the directory no longer exist. If libvirtd
was running the whole time between starting and destroying VM the
detection is skipped because we still have both FD in memory. But if
libvirtd was restarted and no operation requiring cgroup devices
executed the FDs would be 0 and libvirt would try to detect them using
the cgroup directory. This results in reporting following errors:
libvirtd[955]: unable to open '/sys/fs/cgroup/machine.slice/machine-qemu\x2d1\x2dguest.scope/': No such file or directory
libvirtd[955]: Failed to remove cgroup for guest
When running on non-systemd host where we handle cgroups manually this
would not happen.
When destroying VM it is not necessary to detect the BPF prog and map
because the following code only closes the FDs without doing anything
else. We could run code that would try to detach the BPF prog from the
cgroup but that is not necessary as well. If the cgroup is removed and
there is no other FD open to the prog kernel will cleanup the prog and
map eventually.
Reported-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When nested cgroup was introduced it did not properly free file
descriptors for BPF prog and map. With nested cgroups we create the BPF
bits in the nested cgroup instead of the VM root cgroup.
This would leak the FDs which would be the last reference to the prog
and map so kernel would not remove the resources as well. It would only
happen once libvirtd process exits.
Fixes: 184245f53b
Reported-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After all devices were enumerated, the enumeration thread call
nodeDeviceUpdateMediatedDevices() to refresh the state of
mediated devices. This means that 'mdevctl' will be executed. But
it may be missing on some systems (e.g. mine) in which case we
should just skip the update of mdevs instead of failing whole
device enumeration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To speed up nodedev driver initialization, the device enumeration
is done in a separate thread. Once finished, the thread sets a
boolean variable that allows public APIs to be called (instead of
waiting for the thread to finish).
However, if there's an error in the device enumeration thread
then the control jumps over at the 'error' label and the boolean
is never set. This means, that any virNodeDev*() API is stuck
forever. Mark the initialization as complete (the thread is
quitting anyway) and let the APIs proceed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Although I have not experienced this in real life, there is a
possible race condition when creating new device, getting its XML
or parent or listing its capabilities. If the nodedev driver is
still enumerating devices (in a separate thread) and one of
virNodeDeviceGetXMLDesc(), virNodeDeviceGetParent(),
virNodeDeviceNumOfCaps(), virNodeDeviceListCaps() or
virNodeDeviceCreate() is called then it can lead to spurious
results because the device enumeration thread is removing devices
from or adding them to the internal list of devices (among with
their states).
Therefore, wait for things to settle down before proceeding with
any of the APIs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is more academic dispute than a real bug, but this is taken
from pthread_cond_broadcast(3p) man:
The pthread_cond_broadcast() or pthread_cond_signal() functions
may be called by a thread whether or not it currently owns the
mutex that threads calling pthread_cond_wait() or
pthread_cond_timedwait() have associated with the condition
variable during their waits; however, if predictable scheduling
behavior is required, then that mutex shall be locked by the
thread calling pthread_cond_broadcast() or
pthread_cond_signal().
Therefore, broadcast the initCond while the nodedev driver is
still locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The consensus is to put the verb last. Therefore, the new name is
nodeDeviceInitWait(). This allows us to introduce new function
(done later in a separate commit) that will "complete" the device
initialization.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment for that option states that the default value is 'none' but
it was not set by the code. By default the value is NULL which results
into the following warning:
warning : qemuBuildCompatDeprecatedCommandLine:10393 : Unsupported deprecation behavior '(null)' for VM 'test'
Fixes: 7004504493
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When doing a blockpull with NULL base the full contents of the disk are
pulled into the topmost image which then becomes fully self-contained.
qemuBlockJobProcessEventCompletedPull doesn't install the backing chain
terminators though, although it's guaranteed that there will be no
backing chain behind disk->src.
Add the terminators for completness and for disabling backing chain
detection on further boots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When doing a full block pull job (base == NULL) and the config XML
contains a compatible disk, the completer function would leave a
dangling pointer in 'cfgdisk->src->backingStore' as cfgdisk->src would
be set to the value of 'cfgbase' which was always set to
'cfgdisk->src->backingStore'.
This is wrong though since for the live definition XML we set the
respective counterpart to 'job->data.pull.base' which is NULL in the
above scenario.
This leads to a invalid pointer read when saving the config XML and may
end up in a crash.
Resolve it by setting 'cfgbase' only when 'job->data.pull.base' is
non-NULL.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1946918
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
During its initialization, the nodedev driver tries to set up
monitors for /etc/mdevctl.d directory, so that it can register
mdevs as they come and go. However, if the file doesn't exist
there is nothing to monitor and therefore we can exit early. In
fact, we have to otherwise monitorFileRecursively() fails and
whole driver initialization fails with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
During the nodedev driver initialization two threads are created:
one for listening on udev events (like device plug/unplug) and
the other for enumerating devices (so that the main thread doing
the driver init is not blocked). If something goes wrong at any
point then nodeStateCleanup() is called which joins those two
threads (possibly) created before. But it tries to join them even
they weren't created which is undefined behaviour (and it just so
happens that it crashes on my system).
If those two virThread variables are turned into pointers then we
can use comparison against NULL to detect whether threads were
created.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The nodedev driver private data object @priv is created by
calling udevEventDataNew(). After that, driver->privateData
pointer is set to the freshly allocated object and only a few
lines after all of this the object is locked. Technically it is
safe because there should not be any other thread at this point,
but defensive style of programming says it's better if the object
is locked before driver's privateData is set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If initialization of priv->mdevctlMonitors fails, then the
control jumps over to cleanup label where nodeStateCleanup() is
called which tries to lock @priv. But since @priv was already
locked before taking the jump a deadlock occurs. The solution is
to jump onto @unlock label, just like the code around is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In commit ad80bba90a I mistakenly didn't delete '**' from the
variable declaration when converting it to 'GStrv' and deleted the
'separator' variable since it was declared on the same line as a
different variable.
Fixes: ad80bba90a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Unless you create such an commit, cirrus-ci.com will not pick up the
github project and cirrus-run will fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 66c5674e79 added a query for the device properties of 'usb-host'
but the command header isn't formated the same way as if it were
autogenerated. Reformat all the files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virQEMUCapsInitQMPBasicArch to add the basic set of capabilities
which all qemu versions will get.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If we want to provide correct (fake) caps already for the XML parser we
need to be able to parse the arch early so that we can properly
initialize the caps cache prior to calling the XML parser.
This patch adds code which parses the arch and updates the caps cache
prior to the parse step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In upcoming patches we'll need to parse a certain bit of XML before
calling the full XML parser. This effectively open-codes what
virDomainDefParseFile to reach virDomainDefParseNode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function doesn't fail. Remove the return value and checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests which use files with 'ldargs' and 'args' suffix as output now
use the internal and better line splitting.
Remove the test-wrap-argv.py script, the syntax check which used it and
the helper rewrapping the output when regenerating test output.
For any further use, we require code to use virCommand anyways and thus
it has internal wrapping now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove `nodedevCompareToFile` which was stripping the path to mdevctl
since it's no longer needed if we use the new features of
virCommandSetDryRun.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCommandToString has the possibility to return an already wrapped
string with better format than what we get from the test wrapper script.
The main advantage is that arguments for an option are always on the
same line which makes it more easy to see what changed in a diff and
prevents re-wrapping of the line if a wrapping point moves over the
threshold.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As with previous commits use virCommandSetDryRun to invoke
virCommandToString so that it returns pre-wrapped string.
Since virCommand is better aware of where the arguments terminate we can
see an improvement where comments are no longer line-wrapped.
The changes to the 'commonRules' strings were done with the following
regex:
s/ -/ \\\\\\n-/
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCommandSetDryRun allows to invoke virCommandToString so that the
command string is already wrapped.
We now also need to load the base arguments file without unwrapping the
arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCommandToString has the possibility to return an already wrapped
string with better format than what we get from the test wrapper script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
