A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Domains are now allowed to be pinned to host CPUs with IDs up to 16383.
The new limit is as arbitrary as the old one. It's just bigger.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.
The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough
<features>
<xen>
<passthrough state='on'/>
</xen>
</features>
To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Trivial comment fix, reflecting the changes in
4ee2b31804.
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.
Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Expose the virtio parameter for packed virtqueues as an optional libvirt
XML attribute to virtio-backed devices, e.g.:
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
<driver packed='on'/>
</interface>
If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic has been moved to the individual drivers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add more elements for tuning the virtiofsd daemon
and the vhost-user-fs device:
<driver type='virtiofs' queue='1024' xattr='on'>
<binary path='/usr/libexec/virtiofsd'>
<cache mode='always'/>
<lock posix='off' flock='off'/>
</binary>
</driver>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Introduce a new 'virtiofs' driver type for filesystem.
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</filesystem>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Now that this file no longer transitively includes
domain_conf.h, it can be included here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently they live in util/virhostdev.
However the virhostdev module is wrongly placed
in util, which is below conf/ in our hierarchy.
Move the functions that are actually used in conf/
to conf/ and remove the include of virhostdev.h
from domain_conf.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for the tpm-spapr device model for ppc64. The XML for
this type of TPM looks as follows:
<tpm model='tpm-spapr'>
<backend type='emulator'/>
</tpm>
Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_TPM_MODEL_DEFAULT as a default model which we use
in case the user does not provide a model in the device XML. It has
the TIS's previous value of '0'. In the post parsing function
we change this default value to 'TIS' to have the same model as before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Technically, there is no memleak here, since the only
allocations are filled by virDomainDeviceInfoParseXML,
which cleans up after itself.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simple g_autofree is not enough if we put allocated
data into the device structure.
Define the AUTOPTR_CLEANUP function and use it here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if only iotune group name is given for some disk and
no any params then later start of domain will fail. I guess it
will be convenient to allow such configuration if there is
another disk in the same iotune group with iotune params set. The
meaning is that the first disk have same iotunes and the latter.
Thus one can easily add a disk to iotune group - just add group
name parameter and no need to copy all the params.
Also let's expand iotunes params in the described case so we don't
need to refer to another disk to know iotunes and this will make
logic in many places simple.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And introduce virDomainBlockIoTuneInfoHasAny.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU driver has two functions: qemuGetDHCPInterfaces() and
qemuARPGetInterfaces() that are being used inside only one single
function. They can be turned into generic functions that other drivers
can use. This commit move both from QEMU driver tree to domain conf
tree.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9f6 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.
This fixes clang build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an object to hold the private data and call the
allocation function if it's present in xmlopt.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed in the future for allocating private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Recent changes removed the virCapsPtr, but didn't adjust/remove the
corresponding ATTRIBUTE_NONNULL resulting in a build failure to build
in my Coverity environment.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function will return true if any of disks (or their backing
chain) for given domain contains an NVMe disk.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These all just return a scalar value, so there's no daisy-chained
fallout from changing them, and they can easily be combined in a
single patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previous commit removed last use of this function so we can get rid of
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a simpler replacement for virDomainDiskByName when looking up
by disk target.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt currently uses the VIR_AUTOUNREF macro for auto cleanup of
virObject instances. GLib approaches things differently with GObject,
reusing their g_autoptr() concept.
This introduces support for g_autoptr() with virObject, to facilitate
the conversion to GObject.
Only virObject classes which are currently used with VIR_AUTOREF are
updated. Any others should be converted to GObject before introducing
use of autocleanup.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It is the only user. Rename it to match the local style
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In bc1e924cf0 we've introduced video driver name and whilst
doing so we've utilized VIR_ENUM_IMPL() macro. Then, in domain
XML parsing code the generated
virDomainVideoBackendTypeFromString() is called and its return
value is assigned directly to an unsigned int variable which is
wrong. Also, the video driver enum has 'default' value which is
not formatted into domain XML but is accepted during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It needs to be used by a function that only has a const pointer to
virDomainNetDef.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virDomainDefFormatInternal() has the predefined root name
"domain" to format the XML. But to save both active and inactive domain
in the snapshot XML, the new root name "inactiveDomain" was created.
So, the new function virDomainDefFormatInternalSetRootName() allows to
choose the root name of XML. The former function became a tiny wrapper
to call the new function setting the correct parameters.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.
Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338
This reverts commit 94b3aa55f8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list. This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
