Move this function in order to use it in the next patch before
its previous declaration.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, virDomainDeviceInfoParseXML() uses node->children
evaluation which is too verbose. Use XPath evaluation which is
nicer.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function virDomainDeviceInfoParseXML() will need it soon, because it
will be doing XPath evaluation.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If libvirtd is terminated before the node driver finishes
initialization, it can crash with a backtrace similar to the following:
Stack trace of thread 1922933:
#0 0x00007f8515178774 g_hash_table_find (libglib-2.0.so.0)
#1 0x00007f851593ea98 virHashSearch (libvirt.so.0)
#2 0x00007f8515a1dd83 virNodeDeviceObjListSearch (libvirt.so.0)
#3 0x00007f84cceb40a1 udevAddOneDevice (libvirt_driver_nodedev.so)
#4 0x00007f84cceb5fae nodeStateInitializeEnumerate (libvirt_driver_nodedev.so)
#5 0x00007f85159840cb virThreadHelper (libvirt.so.0)
#6 0x00007f8511c7d14a start_thread (libpthread.so.0)
#7 0x00007f851442bdb3 __clone (libc.so.6)
Stack trace of thread 1922863:
#0 0x00007f851442651d syscall (libc.so.6)
#1 0x00007f85159842d4 virThreadSelfID (libvirt.so.0)
#2 0x00007f851594e240 virLogFormatString (libvirt.so.0)
#3 0x00007f851596635d vir_object_finalize (libvirt.so.0)
#4 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#5 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#6 0x00007f851517755f g_hash_table_remove_all_nodes.part.0 (libglib-2.0.so.0)
#7 0x00007f8515177e62 g_hash_table_unref (libglib-2.0.so.0)
#8 0x00007f851596637e vir_object_finalize (libvirt.so.0)
#9 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#10 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#11 0x00007f84cceb2b42 nodeStateCleanup (libvirt_driver_nodedev.so)
#12 0x00007f8515b37950 virStateCleanup (libvirt.so.0)
#13 0x00005648085348e8 main (libvirtd)
#14 0x00007f8514352493 __libc_start_main (libc.so.6)
#15 0x00005648085350fe _start (libvirtd)
This is because the initial population of the device list is done in a
separate initialization thread. If we attempt to exit libvirtd before
this init thread has completed, we'll try to free the device list while
accessing it from the other thread. In order to guarantee that this
init thread is not accessing the device list when we're cleaning up the
nodedev driver, make it joinable and wait for it to finish before
proceding with the cleanup. This is similar to how we handle the udev
event handler thread.
The separate initialization thread was added in commit
9f0ae0b1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836865
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously, if xml node passed to the virXMLNodeContentString()
was not of type XML_ELEMENT_NODE, @ret could have caused a memory
leak because xmlNodeGetContent() works for other types of nodes
as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need to go to the trouble of telling users about existance of
insecure SASL mechanisms only to then say that they shouldn't be used.
We should only tell people about the GSSAPI mechanism for TCP sockets.
For the SCRAM mechanism we should be telling people about the SHA256
variant only, and also warning that the password database stores the
passwords in clear text.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If running libvirtd via systemd, it gets a 64 MB memlock limit, but if
running from the shell it will only get 64 KB on a Fedora 33 system.
The latter low limit causes any attempt to use BPF to fail and it is
not obvious why.
This improves the error message thus:
# virsh -c lxc:/// start sh
error: Failed to start domain 'sh'
error: internal error: guest failed to start: Failure in libvirt_lxc startup: failed to initialize device BPF map; locked memory limit for libvirtd probably needs to be raised: Operation not permitted
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_idle_add function adds a callback to the primary GMainContext.
To workaround the GSource unref bugs, we need to add our callbacks
to the GMainContext that is associated with the GSource being
unref'd. Thus code using the per-VM virEventThread must use its
private GMainContext.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Somehow, command argument was not printed into debug logs. It is
imperative that all arguments are logged.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connecting to the monitor, a timeout is calculated that is
bigger the more memory guest has (because QEMU has to allocate
and possibly zero out the memory and what not, empirically
deducted). However, when computing the timeout the @total_memory
mmember is accessed directly even though
virDomainDefGetMemoryTotal() should have been used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When switching to g_autoptr this was incorrectly changed from
'continue;' into 'return -1;' resulting into an error when user tries
to set vcpu_quota of running VM:
error: An error occurred, but the cause is unknown
Fixes: e4a8bbfaf2
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In short, virXXXPtr type is going away. With big bang. And to
help us rewrite the code with a sed script, it's better if each
variable is declared on its own line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The name is supposed to be virCapsGuestArchPtr not ..ptr.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The use of virXXXPtr is going away soon, therefore use 'virXXX *'
instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
What we are using really is heap allocated structure rather than
stack allocated. And for that it's better to use g_autoptr() +
G_DEFINE_AUTOPTR_CLEANUP_FUNC() combo, as Glib documentation for
g_auto() reads:
This is meant to be used with stack-allocated structures and
non-pointer types. For the (more commonly used) pointer
version, see g_autoptr().
This will be even more visible, when virSysinfoDefPtr type is
gone. Stay tuned.
Fixes: cee3a900a0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu shim spawns a separate thread in which the event loop is
ran. The virEventRunDefaultImpl() call is wrapped in a while()
loop, just like it should. There are few lines of code around
which try to ensure that domain is destroyed (when quitting) and
that the last round of event loop is ran after the
virDomainDestroy() call. Only after that the loop is quit from
and the thread quits.
However, if domain creation fails, there is no @dom to call
destroy over, the @quit flag is never set and while() never
exits. Set the flag regardless of @dom pointer.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920337
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The commandline generator for 'iothread' objects has a private
implementation of the properties. Convert it to JSON so that it can be
later validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the 'sev0' sev-guest object will never be hotplugged, but we want
to generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the 'masterKey0' secret object will never be hotplugged we want to
generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 94e45d1042 broke exec-restart of virtlogd and virtlockd as the
code waiting for the daemon shutdown closed the daemons before
exec-restarting.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912243
Fixes: 94e45d1042
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent changes which meant to fix daemon shutdown broke the exec-restart
capability of virtlogd and virtlockd, since the code actually closed all
the sockets and shut down all the internals.
Add virNetDaemonQuitExecRestart, which requests a shutdown of the
process, but keeps all the services open and registered since they are
preserved across the restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This problem is reproducible only with secret driver. When
starting a domain via virt-qemu-run and both secret and
(nonexistent) root directory specified this is what happens:
1) virt-qemu-run opens "secret:///embed?root=$rootdir"
connection, which results in the secret driver initialization
(done in secretStateInitialize()). During this process, the
driver creates its own configDir (derived from $rootdir)
including those parents which don't exists yet. This is all
done with the mode S_IRWXU and thus results in the $rootdir
being created with very restrictive mode (specifically, +x is
missing for group and others).
2) now, virt-qemu-run opens "qemu:///embed?root=$rootdir" and
calls virDomainCreateXML(). This results in the master-key.aes
being written somewhere under the $rootdir and telling qemu
where to find it.
But because the secret driver created $rootdir with too
restrictive mode, qemu can't access the file (even though it
knows the full path) and fails to start.
It looks like the best solution is to pre-create the root
directory before opening any connection (letting any driver
initialize itself) and set its mode to something less
restrictive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1859873
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In theory, users might want to use a relative path as a root
directory for embed drivers. But in practice, nothing in driver
initialization (specifically QEMU driver since it's the only one
that supports embedding now), is prepared for that. Document and
enforce absolute paths.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1883725
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
'res->owners' is allocated to 'res->nOwners' elements, but unfortunately
'res->nOwners' doesn't contain the proper value until after the
allocation so 0 elements are allocated. The following loop which assumes
that the array has the right number of elements then accesses the
pointer out of bounds. The bug was also faithfully converted from
VIR_ALLOC_N to g_new0.
Fixes: 4a3d6ed5ee
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent refactor marked 'object' which is returned from the function as
autofree but forgot to use g_steal_pointer in the return statement to
prevent freeing it.
Fixes: 9a1651f64d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit cb29e4e801 didn't take into account that the VM can be inactive
when it's destroyed. This means that the job would remain active also
when the VM became inactive.
To fix this properly:
1) Remove the bogus VM liveness check and early return
(reverts the aforementioned commit)
2) Conditionalize the stats assignment only when the stats object is
present
(properly fix the crash when VM dies when reconnecting)
3) end the asyncjob only when it was already set
(prevent corruption of priv->jobs_queued)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1937598
Fixes: cb29e4e801
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBackupJobTerminate' needs the API flags to see whether
VIR_DOMAIN_BACKUP_BEGIN_REUSE_EXTERNAL. Unfortunately when called via
qemuProcessReconnect()->qemuProcessStop() early (e.g. if the qemu
process died while we were reconnecting) the job is cleared temporarily
so that other APIs can be called. This would mean that we couldn't clean
up the files in some cases.
Save the 'apiFlags' inside the backup object and set it from the
'qemuDomainJobObj' 'apiFlags' member when reconnecting to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
g_variant_new_parsed uses '%t' for a uint64_t rather than printf-like
%llu. Additionally ensure that the passed value is a uint64_t since the
argument used is a 'unsigned int'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1937287
Fixes: bf5f2ed09c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now unused and motivated users to write crazy parsers
which were hard to understand, had pointless error paths just to avoid
few memory allocations.
Remove the function as we're fine with g_strndup and virStrcpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_strsplit to split the string and avoid use of stack'd strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The problem is that g_get_host_name() caches the hostname in a
thread local variable. Therefore, it doesn't reflect any
subsequent hostname changes. While this might be acceptable for
logs where the hostname is printed exactly once when the libvirtd
starts up, it is not optimal for virGetHostnameImpl() which is
what our public virConnectGetHostname() API calls. If the
hostname at the moment of the first API invocation happens to
start with "localhost" or contains a dot, then no further
hostname changes will ever be reflected.
This reverts 26d9748ff1, partially.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already assume that 'retr_passphrase.result' is a string, thus we can
use virStrcpy instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_strndup with a freed buffer instead of the more complex approach
using virStrncpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the temporary string an autofree-ing pointer and copy the contents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite so that the parser doesn't use virStrncpy by employing
g_strsplit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Copy the input string so that we don't have to use a static buffer and
virStrncpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With this, XML fails if config video type 'ramfb' contains
address, since address is not supported for 'ramfb' video
devices. Previously it didn't raise error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1891416
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Switch to using the 'g_auto*' helpers.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This introduces support for the QEMU audio settings that are common to
all audio backends. These are expressed in the QAPI schema as settings
common to all backends, but in reality some backends ignore some of
them. For example, some backends are output only. The parser isn't
attempting to apply restrictions that QEMU itself doesn't apply.
<audio id='1' type='pulseaudio'>
<input mixingEngine='yes' fixedSettings='yes' voices='1' bufferLength='100'>
<settings frequency='44100' channels='2' format='s16'/>
</input>
<output mixingEngine='yes' fixedSettings='yes' voices='2' bufferLength='100'>
<settings frequency='22050' channels='4' format='f32'/>
</output>
</audio>
The <settings> child is only valid if fixedSettings='yes'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev arg is a new way to configure audio devices in QEMU to
replace the QEMU_AUDIO_DRV env variable. This arg is not visible in
the "query-command-line-options" output since it is entirely QAPI
driven, not QemuOpts. It also isn't in "query-qmp-schema" though
since there's no QMP command that uses the Audiodev type yet.
So probe for the existance of this feature by looking for the
-vnc "audiodev" property. This won't let us determine which
precise audio backends QEMU has been built with, but for now
that's no worse than with env variables today.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainDefFindAudioForSound only takes a virDomainSoundDefPtr as
its arg, but we want to use the same functionality for VNC graphics.
In addition if audio ID is zero, then we want to return the first
available audio backend.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Validate that if a non-zero audio ID is given for <sound> or <graphics>
elements, it must map to an <audio> backend that exists.
Validate that audio IDs given in <audio> are unique.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When there are multiple <audio> backends specified, it is possible to
assign a specific one to the VNC server using
<graphics type='vnc'...>
<audio id='1'/>
</graphics>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current <audio> element only allows an "OSS" audio backend, as this
is all that BHyve needed. This is now extended to cover most QEMU audio
backends. These backends all have a variety of attributes they support,
but this initial impl does the bare minimum, relying on built-in
defaults for everything. The only QEMU backend omitted is "dsound" since
the libvirt QEMU driver is not built on Windows platforms.
The SDL audio driver names are based on the SDL 2.0 drivers. It is not
intended to support SDL 1.2 drivers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To prepare for the introduction for more backend specific audio options,
move the OSS options into a dedicated struct and introduce separate
helper methods for parse/format/free.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The attributes on the elements are optional, so we should not force the
elements themselves to be present, especially since we omit them when
formating the XML thus breaking round-tripping.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Check for varuous mandatory elements and improve error message
clarity
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds delay time (steal time inside guest) to libvirt
domain per-vcpu stats. Delay time is an important performance metric.
It is a consequence of the overloaded CPU. Knowledge of the delay
time of a virtual machine helps to understand if it is affected and
estimate the impact.
As a result, it is possible to react exactly when needed and
rebalance the load between hosts. This is used by cloud providers
to provide quality of service, especially when the CPU is
oversubscribed.
It's more convenient to work with this metric in a context of a
libvirt domain. Any monitoring software may use this information.
Signed-off-by: Aleksei Zakharov <zaharov@selectel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The preprocessor macro we use to check whether we're on Linux
has not been spelled properly, and so we will always report the
error message intended for other platforms.
Fixes: 879bcee08c
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Failure of 'qemuMigrationSetDBusVMState' would jump to 'exit_monitor'
but the function isn't called inside of the monitor context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When generating TC rules for domain's outbound traffic, Libvirt
will use the 'average' as the default for 'burst' - it's been
this way since the feature introduction in v0.9.4-rc1~22. The
reason is that 'average' considers 'burst' for policing. However,
when parsing its command line TC uses an unsigned int (with
overflow detection) to store the 'burst' size. This means, that
the upper limit for the value is UINT_MAX, well UINT_MAX / 1024
because we are putting the value in KiB onto the command line.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912210
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Up until now we've implicitly relied on the fact that failures
reported from this function were simply ignored, but that's
about to change and so we need a proper mock.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That's more consistent with our usual naming convention.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This behavior reflects the needs of the QEMU driver and has no
place in a generic module such as virProcess.
Thanks to the changes made with the previous commit, it is now
safe to remove these checks and make all virProcessSetMax*()
functions finally behave the same way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code is written under the assumption that, for all
limits except the core size, asking for the limit to be set to
zero is a no-op, and so the operation is performed
unconditionally.
While this is the behavior we want for the QEMU driver, the
virCommand and virProcess facilities are generic, and should not
implement this kind of policy: asking for a limit to be set to
zero should result in that limit being set to zero every single
time.
Add some checks in the QEMU driver, effectively moving the
policy where it belongs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently this only happens for the core size, but we want the
behavior to be consistent for other limits as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuProcessLaunch() is the correct place to set process limits,
and in fact is where we were dealing with almost all of them,
but the memory locking limit was handled in
qemuBuildCommandLine() instead for some reason.
The code is rewritten so that the desired limit is calculated
and applied in separated steps, which will help with further
changes, but this doesn't alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Doing this now will make the next changes nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions abstract part of the existing logic, which is
the same in all virProcessSetMax*() functions, and changes it
so that which underlying syscall is used depends on their
availability rather than on the context in which they are
called: since prlimit() and {g,s}etrlimit() have slightly
different requirements, using the same one every single time
should make for a more consistent experience.
As part of the change, we also remove the special case for
passing zero to virProcessSetMax*() functions: we have removed
all callers that depended on that functionality in the previous
commit, so this is now safe to do and makes the semantics
simpler.
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the functions accept either an explicit pid or zero,
in which case the current process should be modified: the latter
might sound like a convenient little feature, but in reality
obtaining the pid of the current process is a single additional
function call away, so it hardly makes a difference.
Removing the few cases in which we're passing zero will allow us
to simplify and improve the functions later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <graphics type="vnc" .... powerControl="yes"/> option instructs the
VNC server to enable an extension that lets the client perform a
graceful shutdown, reboot and hard reset.
This is enabled by default since it cannot be assumed that the VNC
client user has administrator rights over the guest OS. In the case
where the VNC user is a guest administrator though, it is reasonable
to allow direct power control host side too.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Calling a stub should always result in ENOSYS being raised,
regardless of what arguments are passed to it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to change their behavior, so it's good to have the
current one documented to serve as baseline.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For reasons unknown, when rewriting this code and dropping
libdevmapper I've mistakenly used incorrect length of dm.name. In
linux/dm-ioctl.h the dm_ioctl struct is defined as follows:
#define DM_NAME_LEN 128
struct dm_ioctl {
...
char name[DM_NAME_LEN]; /* device name */
...
};
However, when copying string into this member, DM_TABLE_DEPS was
used, which is defined as follows:
#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
After decryption, this results in the following size: 3241737483.
Fixes: 2249455654
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit bbc25f0d03 juggled around some
error reporting. Unfortunately virFirewallApply tries to report the
errno stored in the firewall object and we'd try to do that when the
firewall object is NULL too. Report EINVAL if 'firewall' is NULL.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's an optimization in virBufferAdd which returns early when the
length of the added string is 0 (given that auto-indent is disabled).
The optimization causes inconsistent behaviour between these two cases:
virBufferAdd(buf, "", 0); // this doesn't initialize the buffer
and
virBufferAdd(buf, "", -1); //this initializes the buffer
Since using an empty string is used to prime the buffer to an empty
string it can be confusing. Remove the optimization.
This fixes such a wrong initialization done in x86FeatureNames.
Note that our code in many places expects that if no virBuffer APIs are
used on a buffer object, then NULL should be retured, so we can't always
prime the buffer to an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the logic picking which element form to format by using
virBuffers for the partial properties and virXMLFormatElement for
combining them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use an allocated buffer for 'cpu_header' so that g_strdup(_printf) can
be used to fill it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a dynamic string helper so that we don't have to calculate the
string lengths and then iterate from the rear.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can remove the check that 'idx' is negative by forcing callers to
pass unsigned numbers, which they do already or have a check that 'idx'
is positive.
This in turn allows us to remove most return value NULL checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to automatically feed a buffer into a pipe which
can be used by the command to read contents of the buffer.
Rather than passing in a pipe, let's create the pipe inside
virCommandSetSendBuffer and directly associate the reader end with the
command. This way the ownership of both ends of the pipe will end up
with the virCommand right away reducing the need of cleanup in callers.
The returned value then can be used just to format the appropriate
arguments without worrying about cleanup or failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail nowadays. Remove the return value and adjust the
only caller which ensures that @cmd is non-NULL and @fd is positive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the check and reporting of error from the individual virCommand
APIs into a separate helper. This will aid future refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If WITH_PIPE2 is not defined we attempt to set the pipe to nonblocking
operation after they are created. We errorneously rewrote the existing
error message on failure to do so or even reported an error if quiet
mode was requested.
Fixes: ab36f72947
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is constructing an error message from a prefix and the
contents of the qemu log file. Marking just two string modifiers as
translatable is pointless and will certainly confuse translators.
Remove the marking and add a comment which bypasses the
sc_libvirt_unmarked_diagnostics check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that error message formatting doesn't use fixed size buffers we can
drop the math for calculating the maximum chunk of log to report in the
error message and use a round number. This also makes it obvious that
the chosen number is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of VIR_ERROR_MAX_LENGTH is actually misleading to the readers
because it implies that the strings in virError are 1024 bytes at most.
That isn't true at least for the 'message' field as it's constructed
from concatenating the detail string which (was) max 1024 bytes with
the string variant of the error code without limiting to 1024.
Use a local copy for declaring the struct for error transport with a
comment so that's obvious that it's a local decision to use 1k buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some error message reporting functions already have allocated buffers
which were used to format the error message, so copying the strings is
redundant.
Extract the internals from 'virRaiseErrorFull' to
'virRaiseErrorInternal' which takes allocated strings as arguments and
steals them, so that callers can reuse the buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was (probably) a relict from times when we cared about OOM
conditions and the possibility to report the error. Nowadays it doesn't
make sense as virRaiseErrorFull will do an allocated copy of the strings
and also concatenate the error message prefix with the detail which
doesn't guarantee that the result will be less than 1024 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use glib functions to do the relative name lookup instead of manual
assembly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Passing 'strlen(src)' for length makes it equivalent to virStrcpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStrncpy was called with -1 for length of the copied source which is
equivalent to virStrcpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want a (possibly truncated) copy of the full source string so
virStrcpy is a better fit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
15 out of 72 invocations of virStrcpy(Static) ignore the return value as
it's either impossible to fail or in certain cases a truncated copy is
still good enough. Unfortunately virStrcpy doesn't copy anything in
such case as the checks are done first.
Fix this by using g_strlcpy for the implementation and removing
G_GNUC_WARN_UNUSED_RESULT from the function so that callers can decide
when it's okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the crash workaround:
commit 0db4743645
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Jul 28 16:52:47 2020 +0100
util: avoid crash due to race in glib event loop code
we need to do this in the other event loop as crash in that one was also
reported:
https://bugzilla.redhat.com/show_bug.cgi?id=1931331
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This way it can be used from other places as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refractoring includes:
* removal of VIR_FREE
* inversion of the condition
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
By:
* declaration of an autofreed variable in for loop
* use of a new variable
* removal of VIR_FREE
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_HYPERV_STIMER happens to have the same numerical value as
VIR_DOMAIN_FEATURE_HYPERV, resulting in the if-block to always being
executed when a "<hyperv>" tag is found, whether or not it actually
contained a "<stimer>" tag. This had no ill effects, as virXPathNodeSet()
would simply return 0 if that tag does not exist.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Variables using `g_autofree` should not be manually VIR_FREE'd and reused.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous commit removed all usage of this function so we can remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we enforce the cpu.shares range kernel will no longer silently
change the value that libvirt configures so there is no need to read
the value back to get the actual configuration.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before the conversion to using systemd DBus API to set the cpu.shares
there was some magic conversion done by kernel which was documented in
virsh manpage as well. Now systemd errors out if the value is out of
range.
Since we enforce the range for other cpu cgroup attributes 'quota' and
'period' it makes sense to do the same for 'shares' as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit a208176ca1 introduced this feature
with an incorrect "svme-addr-check" spelling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 887dd0d331 caused a small regression in NodeDeviceDetach in the libxl
driver when the 'driver' parameter is not specified. E.g.
# virsh nodedev-detach pci_0000_0a_10_0
error: Failed to detach device pci_0000_0a_10_0
error: An error occurred, but the cause is unknown
If the driver name is not specified, NULL is passed to
virDomainDriverNodeDeviceDetachFlags, in which case virPCIDeviceSetStubDriver
is never called to set the stub to pciback. Fix it by setting the driver to
"xen" if it is not specified when invoking NodeDeviceDetach.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduced in QEMU 6.0.0 by 623972ceae091b31331ae4a1dc94fe5cbb891937
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to report an OOM error is pointless since our infrastructure to
report error needs to allocate memory to report the error.
In addition our code mistakenly reported OOM errors even in cases where
a function could fail for another reason, which would make issues harder
to debug.
Remove the virReportOOMError and backend so that programmers are forced
to think about what can happen. In case when there's another failure
possible a specific error should be reported and otherwise a direct
abort() is better since the logger would abort on g_new anyways.
This patch also removes the syntas-check which forces use of
virReportOOMError instead of using VIR_ERR_NO_MEMORY with other
functions. This allows possible future use when we'd end up in a
situation where trying to recover from an OOM would make sense, such as
when attempting to allocate a massive buffer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function has also non-OOM failure case when the passed string has 0
length, so reporting OOM error is not correct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
OOM isn't the only failure glfs_new can encounter. Report an error which
might give more insight. libgfapi seems to be setting errno but
reporting a system error migt be misleading.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The yajl library returns a wide range of error codes so reporting OOM on
any failure is wrong. In case the error was really based by memory issue
the error reporting will probably cause an abort anyways. Change the
error message so that we know that it happened in JSON at least.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'xmlNewDoc' and 'xmlNewDocComment' return NULL only on allocation
failure. Attempting to raise an error is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Attempting to report error in case when we ran out of memory is
pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Trying to report an error on OOM is pointless since error handling
allocates memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function just allocates a helper object. Reporting errors would be
pointless when we encounter OOM situation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If the argument of 'xmlSaveUri' is non-NULL the function returns NULL on
OOM failure only. Thus we can directly abort rather than try to do the
impossible recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Out of memory isn't the only reason the function can fail. Add a message
stating that copying of a XML node failed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'xmlBufferCreate' returns NULL only on allocation failure. Add a wrapper
which will call 'abort()' in such case in a centralised spot. It doesn't
make much sense to continue execution from here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is used in many places and fails only on allocation
failures. Since trying to recover from allocation failure of a small
buffer by reporting error doesn't make sense add a wrapper for
'nlmsg_alloc_simple' which will 'abort()' on failure and replace all
allocations of netlink message with the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There's nothing that would set the 'err' field of virFirewallPtr to
ENOMEM so we can remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
