Remove the slot reservation for the vga card which doesn't make sense
with supported qemus any more for the i440fx machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemus now support using '-device' for adding a graphics
device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These conveniently don't have any test fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.
This allows us to prevent testing dead code paths with the fake
capability tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT and
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT are now always asserted on PPC
machine types, move them to virQEMUCapsInitQMPBasicArch.
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that minimum supported qemu version is 2.11, we can remove the
conditions.
Note that the check enabling QEMU_CAPS_TCG was for < 2.10.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We no longer have to mask out IOMMU and NVDIMM support as we no longer
support the broken qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuCaps is left for the device commandline formatters for now as it
might come in handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All machine types which have PCI support multibus since qemu 2.0
according to the logic we had, thus we can remove all the machine type
and version checks which are now dead code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These strings are not constant really. They are allocated in
qemuDomainObjBeginJobInternal() and freed in
qemuDomainReset*Job(). Freeing a pointer to const looks weird.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `bufferCount`.
`bufferCount` does not benefit from being referable as e.g. "-7" for
requesting 4294967289 buffers, as this value is distinctly out of range
for normal use.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `retries`. UINT_MAX holds no
special significance for this attribute and is distinctly out of range
for normal use.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `id`.
`id` must be greater than 0 and does not benefit from being referable as
e.g. "-7" for host audio backend 4294967289, as this value is distinctly
out of range for normal use.
Additionally, this patch fixes a use of NULL string with printf's %s
modifier if the `model` attribute is absent.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When updating entries in a bridge forwarding database (i.e., when
macTableManager='libvirt' is configured for the bridge), we may end up
in a situation when the entry we want to add is already present. Let's
just ignore the error in such a case.
This fixes an error to resume a domain when fdb entries were not
properly removed when the domain was paused:
virsh # resume test
error: Failed to resume domain test
error: error adding fdb entry for vnet2: File exists
For some reason, fdb entries are only removed when libvirt explicitly
stops CPUs, but nothing happens when we just get STOP event from QEMU.
An alternative approach would be to make sure we always remove the
entries regardless on why a domain was paused (e.g., during migration),
but that would be a significantly more disruptive change with possible
side effects.
https://bugzilla.redhat.com/show_bug.cgi?id=1603155
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Commit 28a8699316 ( v6.9.0-179-g28a8699316 ) incorrectly replaced
VIR_EXPAND_N by g_renew.
VIR_EXPAND_N has these two extra effects apart from reallocating memory:
1) The newly allocated memory is zeroed out
2) The number of elements in the array which is passed to VIR_EXPAND_N
is increased.
This comes into play when used with virDomainLeaseInsertPreAlloced,
which expects that the array element count already includes the space
for the added 'lease', by plainly just assigning to
'leases[nleases - 1]'
Since g_renew does not increase the number of elements in the array
any existing code which calls virDomainLeaseInsertPreAlloced thus either
overwrites a lease definition or corrupts the heap if there are no
leases to start with.
To preserve existing functionality we revert the code back to using
VIR_EXPAND_N which at this point doesn't return any value, so other
commits don't need to be reverted.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1953577
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virCommandRun() already handles the case where the cmd argument is NULL,
so there's no need for the caller to check. Make all callers consistent
and remove unnecessary NULL checks.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complained that the 'default' case of the switch in
nodeDeviceGetMdevctlCommand() was falling through without initializing
'cmd'. Return NULL in this case even though it should never happen.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When returning early due to errors, cmd will be leaked. Use an autoptr
to handle these early returns without leaking memory.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jumping back in the code is an anti-pattern that should be avoided if
possible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't require that the data is consistent on the destination if
aborting the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the parameter so that it's more clear what state we are in and
fix all callees.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of job refresh, we are killing off any unknown jobs so we don't
care about their fate.
Another difference is that an possible error from the block job
cancellation might be reported, but we don't really care here ince
it's a very unlikely scenario and we also report a warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of backup jobs we can cancel the jobs forcefully since the code
is on a cleanup path when the job fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'block-job-cancel' has one very important semantic difference to
'job-cancel', docummented in qemu as:
Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
(via the event BLOCK_JOB_READY) that the source and destination are
synchronized, then the event triggered by this command changes to
BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
destination now has a point-in-time copy tied to the time of the cancellation.
Since libvirt advertises the block copy job as having the synchronous
abort feature we must not use 'job-cancel' here.
Fixes: 4817b5ca1d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when aborting migration we don't really care
for completion of the blockjob. Add 'force' as parameter of
'block-job-cancel'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't try to setup disk migration and the NBD stuff if we end up
migrating nothing.
The destination side has luckily no setup for the non-NBD cases so
omitting the element fully is okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't even try to setup storage migration if there are no eligible
disks.
This also fixes migration from older libvirts which didn't format an
empty <nbd/> element in the migration cookie if there weren't any disks
to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base the decision on the main API flags (VIR_MIGRATE_NON_SHARED_DISK,
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) via a boolean 'storageMigration'
rather than juggling everything trhough 'migration_flags'.
After this patch 'migration_flags' is updated to contain the legacy
storage migration flags only when we'll be about to use it rather than
setting it and then resetting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'migrate_flags' can be updated in the only caller and since
qemuMigrationSrcNBDStorageCopy already takes @flags which contains
VIR_MIGRATE_NON_SHARED_INC (used to set
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) we can completely remove the
parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the 'nbdURI' schema is not known the code would report an error
but wouldn't return failure.
Fixes: 49186372db
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 518be41aaa refactored qemuMigrationCookieNBDXMLFormat to use
virXMLFormatElement which in comparison to the previous code doesn't
format the element if it's empty.
Unfortunately some crusty bits of our migration code use questionable
logic to assert use of the old-style storage migration parameters which
breaks if no disks are being migrated and the <nbd/> element is not
present.
While later patches will fix the code, re-instate formatting of empty
<nbd/> for increased compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a helper which will format an XML element with attributes and
children, but compared to virXMLFormatElement it also formats an empty
element if both buffers are empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function incorrectly returns 0 when property was successfully read.
Fixes: ab5d2776c9
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When placing vCPUs into CGroups the qemuProcessSetupPid() is
called which then enters a for() loop (around its middle) where
it calls virDomainNumaGetNodeCpumask() for each guest NUMA node.
But the latter returns only a pointer not new reference/copy and
thus the caller must not free it. But the variable is decorated
with g_autoptr() which leads to a double free.
Fixes: 2d37d8dbc9
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libssh2 has ECDSA and ED25519 support beginning with v1.9.0. libvirt cannot
make use of those because it will handle them as unknown key types.
Add support for those host key types.
Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Calling VIR_FREE on a virDomainDef* does not free its various contained
pointers.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Preparatory step to remove virDomainChrSourceDefParseMode.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is the bug I'm facing. I deliberately configured a container
so that the source of a <filesystem/> to passthrough doesn't
exist. The start fails with:
lxcContainerPivotRoot:669 : Failed to create /non-existent/path/.oldroot: Permission denied
which is expected. But what is NOT expected is that CGroup
hierarchy is left behind. This is because the controller sets up
the CGroup hierarchy, user namespace, moves interfaces, etc. and
finally checks whether container setup (done in a separate
process) succeeded. Only after all this the error is propagated
to the LXC driver. The driver aborts the startup and tries to
perform the cleanup, but this is missing CGroups because those
weren't detected yet.
Ideally, whenever a function fails, it tries to unroll back so
that is has no artifacts left behind (look at all those frees/FD
closes/etc. at end of functions). But with CGroups it is
different - the controller process can't clean up after itself,
because it is still running inside that CGroup.
Therefore, what we have to do is to let the driver detect CGroups
as soon as they are created, and proceed with controller
execution only after that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, there is only a single pipe passed to lxc_controller
and it is used by lxc_controller to signal to the LXC driver that
the container is set up and ready to run. However, in the next
commit we will need to signal that the LXC driver has done its
part of startup process and thus the controller can proceed.
Unfortunately, virCommand handshake can't be used for this,
because it's already used to read controller's PID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Future commits will want to reuse the handshakeFd and thus it
mustn't be closed in virLXCControllerDaemonHandshake(). Do the
closing explicitly afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The lxc_controller has a structure that's keeping its internal
state, including so called handshakeFd which is the write end of
a pipe that's used to signal to the LXC driver that the container
is set up and ready to run. However, the struct member is not
initialized to -1, so if anything fails before it is set then the
virLXCControllerFree() function tries to close FD 0 (stdin).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Convenience function to return the value of an unsigned long long XML
attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last usage of `aes` and `dea` as int gone, these two can
become virTristateSwitch.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The code in storage_backend_fs is used for storage_dir and storage_fs
drivers so some parts need to be guarded by checking for
WITH_STORAGE_FS.
Fixes: 16c69e7aae
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Copy the socket path in qemuExtDevicesStart, because
for libvirt-managed virtiofsd daemons the path is filled there
in qemuVirtioFSStart.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far VIR_DOMAIN_FS_ACCESSMODE_PASSTHROUGH is always set
in virDomainFSDefPostParse, but future commits aim to change
that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the default setting of accessmode to the post-parse phase.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
