Currently, a listen address for a SPICE server can be specified. Later,
when the domain is migrated, we need to relocate the graphics which
involves telling new destination to the SPICE server. However, we can't
just assume the listen address is the new location, because the listen
address can be ANYCAST (0.0.0.0 for IPv4, :: for IPv6). In which case,
we want to pass the remote hostname. But there are some troubles with
ANYCAST. In both IPv4 and IPv6 it has many ways for specifying such
address. For instance, in IPv4: 0, 0.0, 0.0.0, 0.0.0.0. The number of
variations gets bigger in IPv6 world. Hence, in order to check for
ANYCAST address sanely, we should take the provided listen address,
parse it and format back in it's full form. Which is exactly what this
patch does.
Such as on FreeBSD. Broken in commit aa2a4cff7.
* src/util/virstoragefile.c (virStorageFileResize): Add missing ';',
mark conditionally unused variables.
Signed-off-by: Eric Blake <eblake@redhat.com>
By default files in a FUSE mount can only be accessed by the
user which created them, even if the file permissions would
otherwise allow it. To allow other users to access the FUSE
mount the 'allow_other' mount option must be used. This bug
prevented non-root users in an LXC container from reading
the /proc/meminfo file.
https://bugzilla.redhat.com/show_bug.cgi?id=967977
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Earlier commit f7e8653f dropped support for using LXC with
kernels having single-instance devpts filesystem from the
LXC controller. It forgot to remove the same code from the
LXC container setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the creation of the commandline failed, libvirt always reported "out
of memory" from the virCommandToString function rather than the proper
error that happened in virStorageBackendCreateQemuImgCmd. Error out
earlier.
As the document for "virsh-resize" says:
<...>
Attempts to shrink the volume will fail unless I<--shrink> is present;
</...>
This makes sense as it at least prevent the user shrinking the important
data of volume without a notice.
The document for "vol-resize" says the new capacity will be sparse
unless "--allocate" is specified, however, the "--allocate" flag
is never implemented. This implements the "--allocate" flag for
fs backend's raw type volume, based on posix_fallocate and the
syscall SYS_fallocate.
The work was done at the time of snapshot xmlstring parsing
if (offline && def->memory &&
def->memory != VIR_DOMAIN_SNAPSHOT_LOCATION_NONE) {
virReportError(...);
}
This patch is in relation to Bug 966449:
https://bugzilla.redhat.com/show_bug.cgi?id=966449
This is a patch addressing the coredump.
Thread 1 must be calling nwfilterDriverRemoveDBusMatches(). It does so with
nwfilterDriverLock held. In the patch below I am now moving the
nwfilterDriverLock(driverState) further up so that the initialization, which
seems to either take a long time or is entirely stuck, occurs with the lock
held and the shutdown cannot occur at the same time.
Remove the lock in virNWFilterDriverIsWatchingFirewallD to avoid
double-locking.
OpenVZ was accessing ethernet data to obtain the guest iface name
regardless the domain is configured to use ethernet or bridged
networking. This prevented the guest network interface to be rightly
named for bridged networking.
Our documentation says a pool may be referenced by its name or UUID
anywhere if it makes sense (pool-name and pool-uuid are the only
exceptions). However, vol-create and vol-create-as commands did not obey
this.
The RPC limits for cpu maps didn't allow to use libvirt on ultra big
boxes. This patch increases size of the limits to support a maximum of
16384 cpus on the host with a maximum of 4096 cpus per guest.
The full cpu map of such a system takes 8 megabytes and the map for
vcpu pinning is 2 kilobytes long.
Our configure.ac says:
Not all versions of gnutls include -lgcrypt, and so we add
it explicitly for the calls to gcry_control/check_version
Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=959191
The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".
(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:
In file included from ../../src/qemu/qemu_command.h:30:0,
from ../../tests/testutilsqemu.h:4,
from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"
But since testutilsqemu.c is already conditional, the header
should be likewise.
* tests/testutilsqemu.h: Make content conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.
But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A literal IPv6 must be escaped, otherwise migration fails with:
unable to execute QEMU command 'drive-mirror': address resolution failed
for f0::0d:5901: Servname not supported for ai_socktype
since QEMU treats everything after the first ':' as the port.
https://bugzilla.redhat.com/show_bug.cgi?id=903480
During domain destruction it's possible that the learnIPAddressThread has
already removed the interface prior to the teardown filter path being run.
The teardown code would only be telling the thread to terminate.
Commit '6afdfc8e' adjusted the exit and error paths to go through the error
and cleanup labels, but neglected to remove the return ret prior to cleanup.
Also noted the 'type' xml string fetch was never checked for NULL which
could lead to some interesting results.
If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.
* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
- Kill access to the new image file instead of the old one.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639
Commit d671121d was incomplete; I hit another compile fail on
cygwin not finding the correct rpc/rpc.h.
* src/Makefile.am (virtlockd_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
A bug in Cygwin [1] and poor error messages from gcc [2] lead
to this confusing compilation error:
qemu/qemu_monitor.c:418:9: error: passing argument 2 of 'sendmsg' from incmpatible pointer type
/usr/include/sys/socket.h:42:11: note: expected 'const struct msghdr *' but argument is of type 'struct msghdr *'
[1] http://cygwin.com/ml/cygwin/2013-05/msg00451.html
[2] http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57475
* src/qemu/qemu_monitor.c (includes): Include <sys/socket.h>
before <sys/un.h>.
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a recurring problem for cygwin :)
For example, see commit 23a4df88.
qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]
* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A cygwin build of the qemu driver fails with:
qemu/qemu_process.c: In function 'qemuPrepareCpumap':
qemu/qemu_process.c:1803:31: error: 'CPU_SETSIZE' undeclared (first use in this function)
CPU_SETSIZE is a Linux extension in <sched.h>; a bit more portable
is using sysconf if _SC_NPROCESSORS_CONF is defined (several platforms
have it, including Cygwin). Ultimately, I would have preferred to
use gnulib's 'nproc' module, but it is currently under an incompatible
license.
* src/qemu/qemu_conf.h (QEMUD_CPUMASK_LEN): Provide definition on
cygwin.
Signed-off-by: Eric Blake <eblake@redhat.com>
