This affects only cgroups v2 where enabled controllers are not based on
available mount points but on the list provided in cgroup.controllers
file. However, moving it will fill in placement as well, so it needs
to be freed together with mount point if we don't need that controller.
Before this patch we were assuming that all controllers available in
root cgroup where available in all other sub-cgroups which was wrong.
In order to fix it we need to move the cgroup controllers detection
after cgroup placement was prepared in order to build correct path for
cgroup.controllers file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In cgroups v2 we don't have to detect available controllers every single
time if we are creating a new cgroup based on parent cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get value
for specific device. This way we will not build the path again in
virCgroupGetValueForBlkDev.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get/set
values instead of calling the existing get/set value functions which
would be building the path again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCgroup struct is always defined and the free function is not calling
anything that would require OS supporting cgroups.
This fixes an issue if we try to start a VM with QEMU binary that
doesn't support QXL. The start operation will fail in
qemuProcessStartValidateVideo() which will set correct error message,
but later in one of the cleanup paths we will call
qemuDomainObjPrivateDataClear() which always calls virCgroupFree()
and that will fail on OS that doesn't support cgroups and it will
set a new error which will be eventually reported to user.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Prior to rewrite of cgroup code we only had one backend to try.
After the rewrite the virCgroupBackendGetAll() returns both
backends (for v1 and v2). However, not both have to really be
present on the system which results in killRecursive callback
failing which in turn might mean we won't try the other backend.
At the same time, this function reports no error as it should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rewrite to support cgroup v2 missed this function. In cgroup v2
we have different files to track tasks.
We would fail to remove cgroup on non-systemd OSes if there is any
extra process assigned to guest cgroup because we would not kill any
process form the guest cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enables to use both cgroup v1 and v2 at the same time together
with libvirt. It is supported by kernel and there is valid use-case,
not all controllers are implemented in cgroup v2 so there might be
configurations where administrator would enable these missing
controllers in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When creating cgroup hierarchy we need to enable controllers in the
parent cgroup in order to be usable. That means writing "+{controller}"
into cgroup.subtree_control file. We can enable only controllers that
are enabled for parent cgroup, that means we need to do that for the
whole cgroup tree.
Cgroups for threads needs to be handled differently in cgroup v2. There
are two types of controllers:
- domain controllers: these cannot be enabled for threads
- threaded controllers: these can be enabled for threads
In addition there are multiple types of cgroups:
- domain: normal cgroup
- domain threaded: a domain cgroup that serves as root for threaded
cgroups
- domain invalid: invalid cgroup, can be changed into threaded, this
is the default state if you create subgroup inside
domain threaded group or threaded group
- threaded: threaded cgroup which can have domain threaded or
threaded as parent group
In order to create threaded cgroup it's sufficient to write "threaded"
into cgroup.type file, it will automatically make parent cgroup
"domain threaded" if it was only "domain". In case the parent cgroup
is already "domain threaded" or "threaded" it will modify only the type
of current cgroup. After that we can enable threaded controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.
Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 1602aa28f8.
There is no need to call virCgroupRemove() nor virCgroupFree() if
virCgroupEnableMissingControllers() fails because it will not modify
'group' at all.
The cleanup of directories is done in virCgroupMakeGroup().
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All the system headers are used only if we are compiling on linux
and they all are present otherwise we would have seen build errors
because in our tests/vircgrouptest.c we use only __linux__ to check
whether to skip the cgroup tests or not.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
tests/vircgrouptest.c uses #ifdef __linux__ for a long time and no
failure was reported so far so it's safe to assume that __linux__ is
good enough to guard cgroup code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
With the introduction of cgroup v2 there are new names used with
cgroups based on which version is used:
- legacy: cgroup v1
- unified: cgroup v2
- hybrid: cgroup v1 and cgroup v2
Let's use 'legacy' instead of 'cgroupv1' or 'controllers' in our code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
They all need virCgroupV1GetMemoryUnlimitedKB() so it's easier to
move them in one commit.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use flags in virCgroupAddTaskInternal instead of boolean parameter.
Following patch will add new flag to indicate thread instead of process.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If we are on host with systemd we need to build cgroup hierarchy
ourselves for controllers that are not managed by systemd.
As a starting parent we need to force root group because
virCgroupMakeGroup() takes that parent in order to inherit values
for cpuset controller.
By default cpuset controller is managed by systemd so we will never
hit the issue but for v2 cgroups we need to use parent cgroup every
time.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virCgroupEnableMissingControllers() fails it could have already
created some directories, we should clean it up as well.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This fixes virCgroupEnableMissingControllers where virCgroupRemove
was not called in case virCgroupMakeGroup failed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The case where we need path of any controller is only for internal use
so move it out to a different function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The 'mntDir' is part of 'struct mntent' as a result of getmntent_r
therefore we should not mangle with it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit <eaf2c9f89107b9f60cf8db2c919f78b987ff7177> moved machineName
generation before virCgroupNewDetectMachine() is called.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 0f80c71822.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Conflicts:
src/util/vircgroup.c: context because 94f1855f09 is not
reverted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 4da4a9fe0c.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit dd47145aaa.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virCgroupPtr is declared using
VIR_AUTOPTR, the function virCgroupFree will be run
automatically on it when it goes out of scope.
This commit also adds an intermediate typedef for virCgroup
type for use with the cleanup macros.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Modify virCgroupFree function signature to take a value of type
virCgroupPtr instead of virCgroupPtr * as the parameter.
Change the argument type in all calls to virCgroupFree function
from virCgroupPtr * to virCgroupPtr. This is a step towards
having consistent function signatures for Free helpers so that
they can be used with VIR_AUTOPTR cleanup macro.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
