I added a host definition to a network definition:
<network>
<name>Lokal</name>
<uuid>2074f379-b82c-423f-9ada-305d8088daaa</uuid>
<bridge name='virbr1' stp='on' delay='0' />
<ip address='192.168.180.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.180.128' end='192.168.180.254' />
<host mac='23:74:00:03:42:02' name='somevm' ip='192.168.180.10' />
</dhcp>
</ip>
</network>
But due to the wrong if-statement the argument --dhcp-hostsfile doesn't get
added to the dnsmasq command. The patch below fixes it for me.
While not technically a double free (since VIR_FREE NULLs the
pointer), this is unnecessary extra code.
This crept in when the function was converted from virRun to virCommand.
The AUTHORS file has also been updated.
Current code does not pass VM mac address to a 802.1Qbh direct attach
interface using IFLA_VF_MAC. This patch adds support in macvtap code to
send IFLA_VF_MAC netlink request during port profile association on a
802.1Qbh interface.
Stefan Cc'ed for comments because this patch changes a condition for
802.1Qbg
802.1Qbh support for IFLA_VF_MAC in enic driver has been posted and is
pending acceptance at http://marc.info/?l=linux-netdev&m=129185244410557&w=2
Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
This patch adds network disk support to libvirt/QEMU. The currently
supported protocols are nbd, rbd, and sheepdog. The XML syntax is like
this:
<disk type="network" device="disk">
<driver name="qemu" type="raw" />
<source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
<host name="mon1.example.org" port="6000">
<host name="mon2.example.org" port="6000">
<host name="mon3.example.org" port="6000">
</source>
<target dev="vda" bus="virtio" />
</disk>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
When libvirt-guests is being stopped, I get the following message:
$Running guests on default URI: test-vm
$Suspending guests on default URI...
$Suspending test-vm: /etc/init.d/libvirt-guests: 340: Syntax error: Bad fd
number
When dumping a domain, it's reasonable to save dump-file in raw format
if dump format is misconfigured or the corresponding compress program
is not available rather then fail dumping.
When we set migrate_speed by json, we receive the following
error message:
libvirtError: internal error unable to execute QEMU command
'migrate_set_speed': Invalid parameter type, expected: number
The reason is that: the arguments of migrate_set_speed
by json is json number, not json string.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
fix warning
CC libvirt_util_la-virtaudit.lo
cc1: warnings being treated as errors
util/virtaudit.c: In function 'virAuditEncode':
util/virtaudit.c:146: error: implicit declaration of function 'virAsprintf' [-Wimplicit-function-declaration]
util/virtaudit.c:146: error: nested extern declaration of 'virAsprintf' [-Wnested-externs]
* tools/virsh.c: add missing option from the CLI to allows setting
up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
In origin code, double quote is only allowed at the begin or end
"complicated argument"
--some_opt="complicated string" (we split this argument into 2 parts,
option and data, the data is "complicated string").
This patch makes it allow double quote at any position of
an argument:
complicated" argument"
complicated" "argument
--"some opt=complicated string"
This patch is also needed for the following patches,
the following patches will not split option argument into 2 parts,
so we have to allow double quote at any position of an argument.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML. This would allow vendor
extensions of specific devices. The patch includes a test for the new
attributes as well.
Patrick Dignan
This is just a trivial patch to virsh.pod (from git master). It adds the
following pieces to the virsh man page:
+ Shows the --inactive and --all optional parameters for the list
command.
Closes Bugzilla #575512, reported by Renich Bon Ciric
https://bugzilla.redhat.com/show_bug.cgi?id=575512
+ Corrects the existing description of the list command, to now say
that only running domains are listed if no domains are specified.
The man page up until this point has said all domains are listed if
no domains are specified, which is incorrect.
+ Adds the "shut off" state to the list of states for the list
command.
+ Adds a missing =back around line 755, that pod2man was complaining
was missing.
According to:
http://libvirt.org/html/libvirt-libvirt.html#virNetworkLookupByUUID
virNetworkLookupByUUID() expects a virConnectPtr as its first argument,
thus making it a method of the virConnect Python class.
Currently it's a method of libvirt.virNetwork.
@@ -805,13 +805,6 @@ class virNetwork:
if ret == -1: raise libvirtError ('virNetworkGetAutostart() failed', net=self)
return ret
- def networkLookupByUUID(self, uuid):
- """Try to lookup a network on the given hypervisor based on its UUID. """
- ret = libvirtmod.virNetworkLookupByUUID(self._o, uuid)
- if ret is None:raise libvirtError('virNetworkLookupByUUID() failed', net=self)
- __tmp = virNetwork(self, _obj=ret)
- return __tmp
-
class virInterface:
def __init__(self, conn, _obj=None):
self._conn = conn
@@ -1689,6 +1682,13 @@ class virConnect:
__tmp = virDomain(self,_obj=ret)
return __tmp
+ def networkLookupByUUID(self, uuid):
+ """Try to lookup a network on the given hypervisor based on its UUID. """
+ ret = libvirtmod.virNetworkLookupByUUID(self._o, uuid)
+ if ret is None:raise libvirtError('virNetworkLookupByUUID() failed', conn=self)
+ __tmp = virNetwork(self, _obj=ret)
+ return __tmp
+
* src/virsh.c: adds cd and pwd commands to virsh useful for save and
restore commands
* docs/virsh.pod virsh.1: update the documentation
* AUTHORS: add Paolo Bonzini
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* src/libvirt_private.syms src/parthelper.c src/storage_backend_disk.c
src/storage_conf.c src/storage_conf.h: allow to create storage
volumes on disk backend, patches by Henrik Persson
* AUTHORS: add Henrik Persson
Daniel
* src/qemu_driver.c: fix a domain state problem after
migration, patch by Federico Simoncelli, fixes#507537
* src/domain_conf.c: fix a transcient domain state problem after
destroy, patch by Federico Simoncelli, fixes#507304
* AUTHORS: add Federico Simoncelli and Javier Fontan
daniel
* configure.in src/libvirt_private.syms src/storage_backend_fs.c
src/util.c src/util.h: find and use kvm-img, qemu-img or qcow-create
dynamically at runtime, patch by Doug Goldstein
* AUTHORS: add Doug Goldstein
Daniel
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
