This new RBD format supports snapshotting and cloning. By having
libvirt create images in format 2 end-users of the created images
can benefit from the new RBD format.
Older versions of libvirt can work with this new RBD format as long
as librbd supports format 2. RBD format is supported by librbd since
version 0.56 (Ceph Bobtail).
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When restarting sheepdog pool, all volumes are missing.
This patch add automatically all volume from the added pool.
Adding last Daniel P. Berrange's syntaxes correction.
Adding vol on separeted function 'inspired' from parallels_storage :
parallelsAddDiskVolume
In order to make a client-only build successful on RHEL4 (yes, you
read that correctly!), commit 3ed2e54 modified src/util/virnetdev.c so
that the functional version of virNetDevGetVLanID() was only compiled
if GET_VLAN_VID_CMD was defined. However, it is *never* defined, but
is only an enum value, so the proper version was no longer compiled
even on platforms that support it. This resulted in the vlan tag not
being properly set for guest traffic on VEPA mode guest macvtap
interfaces that were bound to a vlan interface (that's the only place
that libvirt currently uses virNetDevGetVLanID)
Since there is no way to compile conditionally based on the presence
of an enum value, this patch modifies configure.ac to check for said
enum value with AC_CHECK_DECLS(), which #defines
HAVE_DECL_GET_VLAN_VID_CMD to 1 if it's successful compiling a test
program that uses GET_VLAN_VID_CMD (and still #defines it, but to 0,
if it's not successful). We can then make the compilation of
virNetDevGetVLanID() conditional on the value of
HAVE_DECL_GET_VLAN_VID_CMD.
Some grammar fixes.
s/namespace,set/namespace, set
s/container being allowed/container are allowed
s/the <code>uid/The <code>uid
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Reset line numbering on each input file in check-aclrules.pl. Otherwise
it reports wrong line numbers in its error messages.
Signed-off-by: Yuri Myasoedov <ymyasoedov@yandex.ru>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In the network status XML we may have the <floor/> element with the
'sum' attribute. The attribute represents sum of all 'floor'-s of
computed over each interface connected to the network (this is needed to
guarantee certain bandwidth for certain domain). The sum is therefore a
number. However, if the number was mangled (e.g. by an user's
interference to network status file), we've just ignored it without
refusing to parse such file. This was all due to 'goto error' missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code took into account only the global permissions. The domains now
support per-vm DAC labels and per-image DAC labels. Use the most
specific label available.
The lack of debug printings might be frustrating in the future.
Moreover, this function doesn't follow the usual pattern we have in the
rest of the code:
int ret = -1;
/* do some work */
ret = 0;
cleanup:
/* some cleanup work */
return ret;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
According to the documentation various timer options are only supported
by certain timer types. Add a post parse check to verify that the user
didn't specify invalid options.
Also fix the qemu command line parsing function to set correct default
values for the kvmclock timer so that it passes the new check.
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:
- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported
Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
Coverity complains about "USE_AFTER_FREE" due to how virPCIDeviceSetStubDriver
"could" return either -1, 0, or 1 from the VIR_STRDUP() and then possibly makes
a call to virPCIDeviceDetach().
The only way this could happen is if NULL were passed as the "driver" name
and virStrdup() returned 0. Since the calling functions check < 0 on the
initial function call, the 0 possibility causes Coverity to complain.
To fix this - enforce that the second parameter is not NULL using
ATTRIBUTE_NONNULL(2) for the function prototype, then in virPCIDeviceDetach
add an sa_assert(dev->stubDriver). This will result in Coverity not complaining
any more.
Couple of codepaths shared the same code which can be moved out to a
function and on one of such places, qemuMigrationConfirmPhase(), the
domain was resumed even if it wasn't running before the migration
started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1057407
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
libxlDomainRestoreFlags acquires the driver lock while reading the
domain config from the save file and adding it to
libxlDriverPrivatePtr->domains. But virDomainObjList provides
self-locking APIs, so remove the needless driver locking.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
If available, let libxl handle reaping any children it creates by
specifying libxl_sigchld_owner_libxl_always_selective_reap. This
feature was added to improve subprocess handling in libxl when used
in an application that does not install a SIGCHLD handler like
libvirt
http://lists.xen.org/archives/html/xen-devel/2014-01/msg01555.html
Prior to this patch, it is possible to hit asserts in libxl when
reaping subprocesses, particularly during simultaneous operations
on multiple domains. With this patch, and the corresponding changes
to libxl, I no longer see the asserts. Note that the libxl changes
will be included in Xen 4.4.0. Previous Xen versions will be
susceptible to hitting the asserts even with this patch applied to
the libvirt libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Handling the domain shutdown event within the event handler seems
a bit unfair to libxl's event machinery. Domain "shutdown" could
take considerable time. E.g. if the shutdown reason is reboot,
the domain must be reaped and then started again.
Spawn a shutdown handler thread to do this work, allowing libxl's
event machinery to go about its business.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Due to some misunderstanding of requirements libxl places on timer
handling, I introduced the half-brained idea of maintaining a list
of timeouts that the driver could force to expire before freeing a
libxlDomainObjPrivate (and hence libxl_ctx). But testing all
the latest versions of Xen supported by the libxl driver (4.2.3,
4.3.1, 4.4.0 RC3), I see that libxl will handle this just fine and
there is no need to force expiration behind libxl's back. Indeed it
may be harmful to do so.
This patch removes the timer list, allowing libxl to handle cleanup
of its timer registrations.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When libxl registers an FD with the libxl driver, the refcnt of the
associated libxlDomainObjPrivate object is incremented. The refcnt
is decremented when libxl deregisters the FD. But some FDs are only
deregistered when their libxl ctx is freed, which unfortunately is
done in the libxlDomainObjPrivate dispose function. With references
held by the FDs, libxlDomainObjPrivate is never disposed.
I added the ref/unref in FD registration/deregistration when adding
the same in timer registration/deregistration. For timers, this
is a simple approach to ensuring the libxlDomainObjPrivate is not
disposed prior to their expirtation, which libxl guarantees will
occur. It is not needed for FDs, and only causes
libxlDomainObjPrivate to leak.
This patch removes the reference on libxlDomainObjPrivate for FD
registrations, but retains them for timer registrations. Tested on
the latest releases of Xen supported by the libxl driver: 4.2.3,
4.3.1, and 4.4.0 RC3.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
With my recent work on the test, both time() and localtime() are used.
While mocking the former one, we get predictable result for UTC. But
since the latter function uses timezone to get local time, the result of
localtime() is not so predictive. Therefore, we must set the TZ variable
at the beginning of the test. To be able to catch some things that work
just by a blind chance, I'm choosing a virtual timezone that (hopefully)
no libvirt developer resides in.
The qemuxml2argvtest is run on more platforms than linux. For instance
FreeBSD. On these platforms we are, however, not mocking time() which
results in current time being fetched from system and hence tests number
32 and 33 failing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainMemoryStats was run on a domain with virtio balloon driver
running on an old qemu which supports QMP but does not support qom-list
QMP command, libvirtd would crash. The reason is we did not check if
qemuMonitorJSONGetObjectListPaths failed and moreover we even stored its
result in an unsigned integer type.
When attempting a blockcommit from the top layer, the base argument
passed is NULL. This will be dereferenced when attempting a commit with
an empty image chain. Output the real volume path instead:
virsh blockcommit --verbose --path vda --domain DOMNAME --wait
error: invalid argument: top '/path/somefile' in chain for 'vda' has no backing file
instead of:
error: invalid argument: top '(null)' in chain for 'vda' has no backing file
Eric Blake suggested to change this message to be different from the
glibc's NULL deref protection message in printf to be able to
differentiate errors.
When trying to introduce a test for previous patch, I've
noticed that the command line is constructed using current
time. This won't work in our test suite (unless you guys
wants to set a specific time prior to each test run :) ).
Therefore we need to mock calls to time(2) to return the
same value every time it's called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1046192
Commit b8bf79a, which adds clock='variable', forgets to check
localtime basis in qemuBuildClockArgStr(). So that localtime
basis could not be used.
Reported-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 2ce63c1 added imagelabel generation when relabeling is turned
off. But we weren't filling out the sensitivity for type 'none' labels,
resulting in an invalid label:
$ virsh managedsave domain
error: unable to set security context 'system_u:object_r:svirt_image_t'
on fd 28: Invalid argument
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
On Fedora 20, with wireshark-devel installed, 'make rpm' failed
due to installed but unpackaged files related to wireshark. As
F20 is already released without wireshark, I chose to add a new
sub-package that is enabled only for F21 and later. Furthermore,
all existing wireshark plugins belong to the wireshark package,
so I got to invent behavior of how the first third-party wireshark
module will behave.
* libvirt.spec.in (with_wireshark): Add new conditional.
* configure.ac (ws-plugindir): Improve wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1057321
pointed out that we weren't honoring the <bandwidth> element in
libvirt networks using <forward mode='bridge'/>. In fact, these
networks are just a method of giving a libvirt network name to an
existing Linux host bridge on the system, and libvirt doesn't have
enough information to know where to set such limits. We are working on
a method of supporting network bandwidths for some specific cases of
<forward mode='bridge'/>, but currently libvirt doesn't support it. So
the proper thing to do now is just log an error when someone tries to
put a <bandwidth> element in that type of network. (It's unclear if we
will be able to do proper bandwidth limiting for macvtap networks, and
most definitely we will not be able to support it for hostdev
networks).
While looking through the network XML documentation and comparing it
to the networkValidate function, I noticed that we also ignore the
presence of a mac address in the config in the same cases, rather than
failing so that the user will understand that their desired action has
not been taken.
This patch updates networkValidate() (which is called any time a
persistent network is defined, or a transient network created) to log
an error and fail if it finds either a <bandwidth> or <mac> element
and the network forward mode is anything except 'route'. 'nat', or
nothing. (Yes, neither of those elements is acceptable for any macvtap
mode, nor for a hostdev network).
NB: This does *not* cause failure to start any existing network that
contains one of those elements, so someone might have erroneously
defined such a network in the past, and that network will continue to
function unmodified. I considered it too disruptive to suddenly break
working configs on the next reboot after a libvirt upgrade.
While at it, also relinquish active commit rights:
[x years between commits] is probably a poster child example of inactivity :)
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1045124
When loading modules, libvirt does not honor the modprobe blacklist.
Use the new virKModLoad() API in order to attempt load with blacklist check.
Use the new virKModIsBlacklisted() API to check if the failure to load
was due to the blacklist
Signed-off-by: John Ferlan <jferlan@redhat.com>
virKModConfig() - Return a buffer containing kernel module configuration
virKModLoad() - Load a specific module into the kernel configuration
virKModUnload() - Unload a specific module from the kernel configuration
virKModIsBlacklisted() - Determine whether a module is blacklisted within
the kernel configuration
commit f094aaac changed qemuPrepareHostdevPCIDevices() such that it
may modify the "backend" (vfio vs. legacy kvm) setting in the
virHostdevDef. However, qemuDomainAttachHostPciDevice() (used by
hotplug) copies the backend setting into a local *before* calling
qemuPrepareHostdevPCIDevices(), and then later makes a decision based
on that pre-change value.
The result is that, if the backend had been set to "default" (i.e. not
specified in the config) and was later updated to "VFIO" by
qemuPrepareHostdevPCIDevices(), the qemu process' MacMemLock is not
increased (as is required for VFIO device assignment).
This patch delays making the local copy of backend until after its
potential modification.
The project has historically operated as a meritocratic
consensus based community. Formally document what has
always been an unwritten assumption amongst the community
participants. Also include an explicit code of conduct
to preempt any potential, but unlikely, future problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous patch fixed "forwardPlainNames" so that it really is
doing only what is intended, but left the default to be
"forwardPlainNames='no'". Discussion around the initial version of
that patch led to the decision that the default should instead be
"forwardPlainNames='yes'" (i.e. the original behavior before commit
f3886825). This patch makes that change to the default.
In commit f386825 we began adding the options
--domain-needed
--local=/$mydomain/
to all dnsmasq commandlines with the stated reason of preventing
forwarding of DNS queries for names that weren't fully qualified
domain names ("FQDN", i.e. a name that included some "."s and a domain
name). This was later changed to
domain-needed
local=/$mydomain/
when we moved the options from the dnsmasq commandline to a conf file.
The original patch on the list, and discussion about it, is here:
https://www.redhat.com/archives/libvir-list/2012-August/msg01594.html
When a domain name isn't specified (mydomain == ""), the addition of
"domain-needed local=//" will prevent forwarding of domain-less
requests to the virtualization host's DNS resolver, but if a domain
*is* specified, the addition of "local=/domain/" will prevent
forwarding of any requests for *qualified* names within that domain
that aren't resolvable by libvirt's dnsmasq itself.
An example of the problems this causes - let's say a network is
defined with:
<domain name='example.com'/>
<dhcp>
..
<host mac='52:54:00:11:22:33' ip='1.2.3.4' name='myguest'/>
</dhcp>
This results in "local=/example.com/" being added to the dnsmasq options.
If a guest requests "myguest" or "myguest.example.com", that will be
resolved by dnsmasq. If the guest asks for "www.example.com", dnsmasq
will not know the answer, but instead of forwarding it to the host, it
will return NOT FOUND to the guest. In most cases that isn't the
behavior an admin is looking for.
A later patch (commit 4f595ba) attempted to remedy this by adding a
"forwardPlainNames" attribute to the <dns> element. The idea was that
if forwardPlainNames='yes' (default is 'no'), we would allow
unresolved names to be forwarded. However, that patch was botched, in
that it only removed the "domain-needed" option when
forwardPlainNames='yes', and left the "local=/mydomain/".
Really we should have been just including the option "--domain-needed
--local=//" (note the lack of domain name) regardless of the
configured domain of the network, so that requests for names without a
domain would be treated as "local to dnsmasq" and not forwarded, but
all others (including those in the network's configured domain) would
be forwarded. We also shouldn't include *either* of those options if
forwardPlainNames='yes'. This patch makes those corrections.
This patch doesn't remedy the fact that default behavior was changed
by the addition of this feature. That will be handled in a subsequent
patch.
I've received a notice over IRC that on some systems, the
virnetdevbandwidthtest is not linked with libxml:
/usr/bin/ld: virnetdevbandwidthtest.o: undefined reference to symbol 'xmlStrEqual@@LIBXML2_2.4.30'
/usr/lib/x86_64-linux-gnu/libxml2.so.2: error adding symbols: DSO missing from command line
Trivial way avoiding this is to add LIBXML_LIBS to
virnetdevbandwidthtest_LDADD.
We support only one spicevmc channel name anyway and the code is
prepared to use the default one, there's only one check missing. It
is also mentioned in the documentation already and helps defining
domains with spice vdagent for people using virsh.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.
While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.
