Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
Instead of having a single function that probes the
architecture from the monitor and then sets a bunch of
basic capabilities based on it, have a separate function
for each part: virQEMUCapsInitQMPArch() only sets the
architecture, and virQEMUCapsInitQMPBasicArch() only sets
the capabilities.
This split will be useful later on, when we will want to
set basic capabilities from the test suite without having
to go through the pain of mocking the monitor.
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 9e2465834 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.
Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.
As a result of this change
<cpu mode='host-model'>
<feature name='invtsc' policy='require'/>
</cpu>
will work with all QEMU versions. Such CPU definition would be forbidden
with QEMU >= 2.9.0 without this patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.
Add a special case for idx == 0
One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For guests that use <memoryBacking><locked>, our only option
is to remove the memory locking limit altogether.
Partially-resolves: https://bugzilla.redhat.com/1431793
Instead of having a separate function, we can simply return
zero from the existing qemuDomainGetMemLockLimitBytes() to
signal the caller that the memory locking limit doesn't need
to be set for the guest.
Having a single function instead of two makes it less likely
that we will use the wrong value, which is exactly what
happened when we started applying the limit that was meant
for VFIO-using guests to <memoryBacking><locked>-using
guests.
This reverts commit c2e60ad0e5.
Turns out this check is excessively strict: there are ways
other than <memtune><hard_limit> to raise the memory locking
limit for QEMU processes, one prominent example being
tweaking /etc/security/limits.conf.
Partially-resolves: https://bugzilla.redhat.com/1431793
Creating a copy of the definition we want to add in a migration cookie
makes the code cleaner and less prone to memory leaks or double free
errors.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU allows for TSC frequency to be explicitly set to enable migration
with invtsc (migration fails if the destination QEMU cannot set the
exact same frequency used when starting the domain on the source host).
Libvirt already supports setting the TSC frequency in the XML using
<clock>
<timer name='tsc' frequency='1234567890'/>
</clock>
which will be transformed into
-cpu Model,tsc-frequency=1234567890
QEMU command line.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The hyperv panic notifier reports additional data in form of 5 registers
that are reported in the crash event from qemu. Log them into the VM log
file and report them as a warning so that admins can see the cause of
crash of their windows VMs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426176
For certain kinds of panic notifiers (notably hyper-v) qemu is able to
report some data regarding the crash passed from the guest.
Make the data accessible to the callback in qemu so that it can be
processed further.
Format the mediated devices on the qemu command line as
-device vfio-pci,sysfsdev='/path/to/device/in/syfs'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since mdevs are just another type of VFIO devices, we should increase
the memory locking limit the same way we do for VFIO PCI devices.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
As goes for all the other hostdev device types, grant the qemu process
access to /dev/vfio/<mediated_device_iommu_group>.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Keep track of the assigned mediated devices the same way we do it for
the rest of hostdevs. Methods like 'Prepare', 'Update', and 'ReAttach'
are introduced by this patch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So far, the official support is for x86_64 arch guests so unless a
different device API than vfio-pci is available let's only turn on
support for PCI address assignment. Once a different device API is
introduced, we can enable another address type easily.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This way more drivers can utilize the functionality without copying
the code. And we can therefore test it in one place for all of them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That file has only two exported files and each one of them has
different naming. virNode is what all the other files use, so let's
use it. It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Both QEMU and bhyve are using the same function for setting up the CPU
in virCapabilities, so de-duplicate it, save code and time, and help
other drivers adopt it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
To allow updating stats based on the node name, add a helper function
that will fetch the required data from 'query-named-block-nodes' and
return it in hash table for easy lookup.
Detect the node names when setting block threshold and when reconnecting
or when they are cleared when a block job finishes. This operation will
become a no-op once we fully support node names.
To allow matching the node names gathered via 'query-named-block-nodes'
we need to query and then use the top level nodes from 'query-block'.
Add the data to the structure returned by qemuMonitorGetBlockInfo.
qemu for some time already sets node names automatically for the block
nodes. This patch adds code that attempts a best-effort detection of the
node names for the backing chain from the output of
'query-named-block-nodes'. The only drawback is that the data provided
by qemu needs to be matched by the filename as seen by qemu and thus
if two disks share a single backing store file the detection won't work.
This will allow us to use qemu commands such as
'block-set-write-threshold' which only accepts node names.
In this patch only the detection code is added, it will be used later.
Add monitor tooling for calling query-named-block-nodes. The monitor
returns the data as the raw JSON array that is returned from the
monitor.
Unfortunately the logic to extract the node names for a complete backing
chain will be so complex that I won't be able to extract any meaningful
subset of the data in the monitor code.
The code is currently simple, but if we later add node names, it will be
necessary to generate the names based on the node name. Add a helper so
that there's a central point to fix once we add self-generated node
names.
