Commit Graph

118 Commits

Author SHA1 Message Date
Ján Tomko
df6551feb4 virsh: reject more negative numbers
Be more positive and reject negative numbers where we don't
allow them by using the virStrToLong variants with 'p'.

https://bugzilla.redhat.com/show_bug.cgi?id=1436119
2017-03-27 17:20:03 +02:00
John Ferlan
f62e418c86 virsh: Allow display of the physical volume size
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-20 13:54:03 -05:00
Erik Skultety
bdd6899b55 tools: Replace vshPrint with vshPrintExtra on places we forgot about
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-11-14 12:14:11 +01:00
Erik Skultety
53525f914d tools: use vshError rather than vshPrint on failure
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-11-14 12:14:11 +01:00
Ivan Baldo
83adcb5bdf virsh: Be explicit that vol-resize is an offline operation.
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-10-13 07:57:31 +02:00
Yanqiu Zhang
ed8ba91ef2 storage: Delete extra wrap after vol-resize error
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:

   (1)# virsh vol-resize --pool default --vol vol-test 5M
        error: Failed to change size of volume 'vol-test' to 5M

        error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified

   (2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
        error: Failed to change size of volume 'volds' by 10M

        error: invalid argument: can't shrink capacity below existing allocation
2016-09-07 11:11:30 -04:00
Pino Toscano
4362ff4337 virsh: use vshError consistently after virBufferError checks
If virBufferError() reports an error, then vshError() is needed to
report the error situation instead of a simple vshError().
2016-08-24 17:43:29 +02:00
Pino Toscano
b620bdee14 virsh: respect -q/--quiet more
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.

Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
2016-08-24 17:43:29 +02:00
Peter Krempa
f4bdf2e3ab virsh: volume: Add --bytes to 'vol-info' 2016-05-04 10:03:04 +02:00
Cole Robinson
2f1dc3de46 man: Clarify virsh vol-clone works within a single pool
virsh vol-clone is expected to clone a volume within a single
pool; it doesn't work for cloning across pools. Clarify the docs

https://bugzilla.redhat.com/show_bug.cgi?id=1103714
2016-04-20 08:55:31 -04:00
Olga Krishtal
ee36975597 storage: add ploop volume type
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-04-15 17:27:32 +02:00
Michal Privoznik
64e66d8ed6 virsh: Teach vol-create-as to --print-xml
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately vol-create-as
was missing it. Maybe nobody had needed it yet. Well, I did
just now.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-12 16:16:09 +01:00
Michal Privoznik
bb0b8e5d67 cmdVolCreateAs: Rework to follow usual func pattern
The way we usually write functions is that we start the work and
if something goes bad we goto cleanup and roll back there. Or
just free resources that are no longer needed. Do the same here.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-12 16:16:09 +01:00
Wido den Hollander
63cdc92f04 storage: Add TRIM algorithm to storage volume API
This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:09:14 -05:00
John Ferlan
5b436359a8 virsh: Create macros for common "vol" options
Rather than continually cut-n-paste the strings into each command,
create common macros to be used generically.  Replace the more commonly
used "vol" option with a macro. This also adjusts 2 commands that
didn't have the correct helpstr - 'vol-create-from' and 'vol-clone'.
Both are described in the man page as taking vol, path, or key and
the code uses the virshCommandOptVol instead of virshCommandOptVolBy.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:01 -05:00
John Ferlan
febf69b5e9 virsh: Create macro for common "file" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option.  Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
70c6e67766 virsh: Adjustments for the VIRSH_COMMON_OPT_POOL
The macro is slightly adjusted to add an argument "_helpstr". This
will be passed as a translation macro string since other uses of the
option may not have the same exact help string (such as is the case
when the uuid is not suppliable for create commands).

In virsh-pool.c - we'll create a singular VIRSH_COMMON_OPT_POOL_FULL
in order to pass along the 'N_("pool name or uuid")'

In virsh-volume.c there will be a VIRSH_COMMON_OPT_POOL_FULL and a
VIRSH_COMMON_OPT_POOL_NAME, which passes 'N_("pool name")' for
the commands that can only pass a name. There will also be a
VIRSH_COMMON_OPT_POOL_OPTIONAL which is used for the command
options which use OT_STRING and don't require the --pool argument.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
2eba5c5635 virsh: Add --delete-snapshots flag for undefine and vol-delete
https://bugzilla.redhat.com/show_bug.cgi?id=1281710

Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag.  This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.

For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.

Currently only supported for rbd backends.
2015-12-18 10:51:08 -05:00
Ján Tomko
ea723c4826 virsh: rename vshCommandOptString to vshCommandOptStringQuiet
This function does not set an error. Make it obvious in its name
to discourage its usage without reporting an error in the caller.
2015-12-09 10:44:26 +01:00
Erik Skultety
834c5720e4 tools: Introduce new client generic module vsh
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
2015-08-14 15:45:44 +02:00
Andrea Bolognani
815dc963ee virsh: Move error messages inside vshCommandOpt*() functions 2015-06-02 09:20:31 -04:00
Andrea Bolognani
be6ff4da95 virsh: Pass vshControl to all vshCommandOpt*() calls
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.

We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.

vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
2015-06-02 09:20:31 -04:00
Ján Tomko
0a33bba1ae virsh: make negative values with vol-resize more convenient
When shrinking a volume by a certain size, instead of typing
  vol-resize volume 1G --delta --shrink
we allow the convience of specifying a negative value:
  vol-resize volume -1G --delta --shrink
getting the same results with one more character.

A negative value only makes sense as a delta. Imply the
--delta parameter if the value is negative.

Still require --shrink, because the operation is potentially
destructive.
2015-06-01 13:56:49 +02:00
Andrea Bolognani
449316701b virsh: Improve error message on integer value parsing failure.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
2015-05-18 10:50:06 +02:00
Chen Hanxiao
219ea41d8d virsh-volume: add support for --reflink
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.

Updated the man page to describe the new flag.

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2015-02-03 11:37:30 -05:00
Shanzhi Yu
cd53d947ef virsh: vol-upload disallow negative offset
Commit 570d0f63 describes disabling negative offset usage for
vol-upload/download (e.g. cmdVolDownload and cmdVolUpload; however,
the change was only made to cmdVolDownload. There was no change to
cmdVolUpload.  This patch adds the same checks for vol-upload.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
2014-12-03 08:43:59 -05:00
Martin Kletzander
91cc3d9570 Remove unnecessary curly brackets in tools/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Martin Kletzander
11d9dd1ad8 virsh: Reorder some options
According to comments in parsing functions, optional options should be
specified *after* required ones.  It makes sense and help output looks
cleaner.  The only exceptions are options with type == VSH_OT_ARGV.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-13 15:44:23 +01:00
Martin Kletzander
93cf8f9861 cleanup spaces between parentheses and braces
And add a syntax-check for '){$'.  It's not perfect, but better than
nothing.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-20 14:50:21 +02:00
John Ferlan
570d0f6387 virsh vol-upload/download disallow negative offset
https://bugzilla.redhat.com/show_bug.cgi?id=1087104

Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.

However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file.  Providing other negative values resulted in errors such as:

$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
  --offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument

$

Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op.  Therefore,
disallow a negative value for offset.

Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
2014-07-17 13:15:12 -04:00
Peter Krempa
c62125395b virsh: Reject negative numbers in vshCommandOptULongLong
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
2014-06-12 14:06:21 +02:00
Peter Krempa
6ef0b03483 virsh: Check whether found volume is member of the specified storage pool
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:

Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':

Currently we'd return:
  $ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
  Name:           test.qcow
  Type:           file
  Capacity:       100.00 MiB
  Allocation:     212.00 KiB

After the fix:
 $ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
 error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
2014-06-02 10:56:49 +02:00
Ján Tomko
5d8793eebb Indent top-level labels by one space in tools/ 2014-03-25 14:58:41 +01:00
Laine Stump
64bb902451 virsh: eliminate hardcoded indentation in xml generated for commands
These are never seen externally, only passed into libvirt APIs, so in
practice this makes no real difference, but it's good to be
consistent.
2014-03-14 00:02:38 -06:00
Peter Krempa
a751e3452b virsh: volume: Fix lookup of volumes to provide better error messages
If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.

This changes the error in case the user-selected pool is inactive from:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: failed to get vol 'somevolname'
 error: Storage volume not found: no storage vol with matching path
 somevolname

To a more descriptive:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: pool 'inactivepool' is not active

And in case a user specifies an invalid pool from:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: failed to get vol 'somevolname', specifying --pool might help
 error: Storage volume not found: no storage vol with matching path somevolname

To something less confusing:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: Storage pool not found: no storage pool with matching name 'invalidpool'
2014-03-05 09:08:32 +01:00
Eric Blake
50f7960d37 virsh: kill over-engineered asprintf failure recovery
I noticed this while shortening switch statements via VIR_ENUM.
Basically, the only ways virAsprintf can fail are if we pass a
bogus format string (but we're not THAT bad) or if we run out
of memory (but it already warns on our behalf in that case).
Throw away the cruft that tries too hard to diagnose a printf
failure.

* tools/virsh-volume.c (cmdVolList): Simplify.
* tools/virsh-pool.c (cmdPoolList): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-24 11:47:18 -07:00
Eric Blake
466b12ab79 virsh: use more compact VIR_ENUM_IMPL
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future.  Make this change throughout virsh.

Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.

* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-24 11:47:18 -07:00
Eric Blake
ecd881b7a7 storage: add network-dir as new storage volume type
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory.  But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch.  Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).

* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 12:29:49 -07:00
Eric Blake
57682aea36 maint: fix comma style issues: tests, tools
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-20 09:14:55 -07:00
Peter Krempa
48072521b6 virsh-volume: Unify strigification of volume type
There were two separate places with that were stringifying type of a
volume. One of the places was out of sync with types implemented
upstream.

To avoid such problems in the future, this patch adds a common function
to convert the type to string and reuses it across the two said places.
2013-11-12 18:35:48 +01:00
Peter Krempa
d6fdcb88b9 virsh-volume: Unify alignment of vol-list output columns
Add an extra space before the first column as we have when listing
domains.

Previous output:

$ virsh vol-list glusterpool
Name                 Path
-----------------------------------------
asdf                 gluster://gluster-node-1/gv0/asdf
c                    gluster://gluster-node-1/gv0/c
cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
Name  Path                               Type     Capacity  Allocation
----------------------------------------------------------------------
asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B

New output:

$ virsh vol-list glusterpool
 Name                 Path
------------------------------------------------------------------------------
 asdf                 gluster://gluster-node-1/gv0/asdf
 c                    gluster://gluster-node-1/gv0/c
 cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
 Name  Path                               Type     Capacity  Allocation
------------------------------------------------------------------------
 asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
 c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
 cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B
2013-11-12 17:01:25 +01:00
Hongwei Bi
0c500a4f2e virsh-volume: Add missing check when calling virStreamNew
Check return value of virStreamNew when called by cmdVolUpload and
cmdVolDownload.
2013-09-30 15:00:07 +02:00
Daniel P. Berrange
111f6f4d73 Convert 'int i' to 'size_t i' in tools/ files
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-10 17:40:13 +01:00
Jiri Denemark
634096536c virsh: Obey pool-or-uuid spec when creating volumes
Our documentation says a pool may be referenced by its name or UUID
anywhere if it makes sense (pool-name and pool-uuid are the only
exceptions). However, vol-create and vol-create-as commands did not obey
this.
2013-06-04 10:16:02 +02:00
Osier Yang
2a3a725c33 virsh: Fix regression of vol-resize
Introduced by commit 1daa4ba33a. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
2013-05-24 16:55:39 +08:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Ján Tomko
ce284bb56d virsh: clarify vol-{down,up}load description
Mention file/volume contents instead of just 'file'/'volume'.

Also change Download->download in vol-download help,
to be consistent with other volume commands.

https://bugzilla.redhat.com/show_bug.cgi?id=955537
2013-04-30 14:19:49 +02:00
Ján Tomko
7f913c8254 virsh: don't print --(null) in vol-name and vol-pool
Don't print the pool option name if it's null.

Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol

After:

virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
2013-03-22 13:05:46 +01:00
Martin Kletzander
73cc87d161 Cleanup useless flags specifications
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed.  After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
2013-03-15 15:05:45 +01:00
Michal Privoznik
bbd09adbe2 virsh-volume.c: Switch to c99 initialization of vshCmdInfo 2013-02-12 17:50:22 +01:00
Michal Privoznik
df5fd11f86 virsh: Switch to c99 initialization of vshCmdDef 2013-02-12 17:50:21 +01:00
Peter Krempa
1daa4ba33a virsh-volume: Update volume commands to use vshCommandOptStringReq 2013-02-04 14:17:44 +01:00
Peter Krempa
042bf709a9 virsh-volume: Rename helper function makeCloneXML to vshMakeCloneXML 2013-02-04 10:34:33 +01:00
Michal Privoznik
4909bcbbc1 virsh-volume.c: Switch to C99 initialization of vshCmdOptDef 2013-01-17 13:58:53 +01:00
Daniel P. Berrange
556cf5f617 Rename xml.{c,h} to virxml.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
44f6ae27fe Rename util.{c,h} to virutil.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
2005f7b552 Rename buf.{c,h} to virbuffer.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Ján Tomko
790dfee5ea virsh: allow metadata preallocation when creating volumes
Add --prealloc-metadata flag to these commands:
vol-clone
vol-create
vol-create-as
vol-create-from
2012-12-07 11:46:48 +01:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Osier Yang
aa81db3ff8 virsh: Fix version numbers in comments
And redundant error resetting.

Pushed under trivial rule.
2012-09-13 16:59:12 +08:00
Osier Yang
7e9548fce3 list: Use virStoragePoolListAllVolumes in virsh
tools/virsh-volume.c:
  * vshStorageVolSorter to sort storage vols by name

  * vshStorageVolumeListFree to free the volume objects list

  * vshStorageVolumeListCollect to collect the volume objects, trying
    to use new API first, fall back to older APIs if it's not supported.
2012-09-10 10:40:34 +08:00
Peter Krempa
67f83cd497 virsh: remove unneeded usage of vshConnectionUsability()
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.

vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
2012-08-31 16:22:22 +02:00
Eric Blake
f95f1ba4c0 virsh: split out virsh-volume.c
Last of the file splits.

* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
2012-08-21 00:23:12 -06:00
Eric Blake
e68ee5e765 virsh: use common namespacing
Convert the exported items in virsh.h to use a common 'vsh' prefix.

* tools/virsh.h (VIRSH_MAX_XML_FILE): Rename...
(VSH_MAX_XML_FILE): ...and parenthesize.
(DIFF_MSEC, CTRL_CLOSE_BRACKET): Delete.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Remove prototype.
(editWriteToTempFile, editFile, editReadBackFile, prettyCapacity)
(virshReportError): Rename...
(vshEditWriteToTempFile, vshEditFile, vshEditReadBackFile)
(vshPrettyCapacity, vshReportError): ...into vsh namespace.
(jobWatchTimeoutFunc): Move to virsh-domain.c.
* tools/virsh.c (vshCommandRun): Inline former DIFF_MSEC.
(main): Inline former CTRL_CLOSE_BRACKET.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Make static.
(prettyCapacity, virshReportError, editWriteToTempFile, editFile):
Fix naming, and adjust usage.
(vshAskReedit, vshCommandRun, vshEventLoop, vshInit): Adjust
usage.
* tools/virsh-domain.c (cmdAttachDevice, cmdCPUCompare)
(cmdCPUBaseline, cmdCreate, cmdDefine, cmdDetachDevice)
(cmdUpdateDevice, cmdDesc, cmdUndefine, cmdStart, cmdVcpucount)
(cmdAttachDevice, cmdDomjobinfo): Likewise.
* tools/virsh-edit.c (do): Likewise.
* tools/virsh-interface.c (cmdInterfaceDefine): Likewise.
* tools/virsh-network.c (cmdNetworkCreate, cmdNetworkDefine):
Likewise.
* tools/virsh-nodedev.c (cmdNodeDeviceCreate): Likewise.
* tools/virsh-nwfilter.c (cmdNWFilterDefine): Likewise.
* tools/virsh-pool.c (cmdPoolCreate, cmdPoolDefine)
(cmdPoolDiscoverSources, cmdPoolList): Likewise.
* tools/virsh-secret.c (cmdSecretDefine): Likewise.
* tools/virsh-snapshot.c (cmdSnapshotCreate, vshSnapshotCreate)
(vshLookupSnapshot, cmdSnapshotEdit, cmdSnapshotCurrent)
(vshGetSnapshotParent): Likewise.
* tools/virsh-volume.c (cmdVolCreate, cmdVolCreateFrom)
(cmdVolInfo, cmdVolList): Likewise.
2012-08-20 07:04:10 -06:00
Osier Yang
c4bdf307e0 virsh: Move command group definition into its own file
* virsh-domain-monitor.c: Add domMonitoringCmds
* virsh-domain.c: Add domManagementCmds
* virsh-host.c: Add hostAndHypervisorCmds
* virsh-interface.c: Add ifaceCmds
* virsh-network.c: Add networkCmds
* virsh-nodedev.c: Add nodedevCmds
* virsh-nwfilter.c: Add nwfilterCmds
* virsh-pool.c: Add storagePoolCmds
* virsh-secret.c: Add secretCmds
* virsh-snapshot.c: Add snapshotCmds
* virsh-volume.c: Add storageVolCmds
* virsh.c: Remove all the above *Cmds.
2012-07-26 12:00:43 +08:00
Osier Yang
9fbb344f6e virsh: Split cmds of storage volume group from virsh.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.

* tools/virsh.c:
  Remove commands for storage storage volume and a few helpers.
  (vshCommandOptVol, vshCommandOptVolBy).

* tools/virsh-volume.c:
  New file, filled with commands of storage volume group and its
  helpers.

* po/POTFILES.in:
  Add virsh-volume.c

* cfg.mk:
  Skip to check config.h including for virsh-volume.c
2012-07-26 11:57:42 +08:00