We call virStorageFileSupportsBackingChainTraversal which already checks
that the 'storageFileRead' callback is non-NULL, which in turn means
that virStorageFileRead will not return -2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Probing by file suffix was meant to be a last resort if probing by
contents fails or is not supported. For most formats we never specified
any suffix. There's a few formats implementing both magic bytes and
suffix and finally DMG which had only suffix probing. Since suffix
probing is nowhere reliable and only one format depends on in which has a
comment that qemu doesn't do the probing either drop the whole
infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In commit v5.9.0-400-gaf8e39921a I removed printing model's fallback and
vendor_id attributes when no model is specified. However, vendor_id
makes sense even without a specific CPU model (for host-model CPUs).
https://bugzilla.redhat.com/show_bug.cgi?id=1804549
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch shows a bug in our code: the
<model vendor_id="Libvirt QEMU"/>
element present in the source XML is lost when the parsed CPU definition
is formatted back to XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1804549
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMonitorGetIOThreads returns a NULL-terminated list even when 0
iothreads are present. The caller didn't perform cleanup if there were 0
iothreads leaking the array.
https://bugzilla.redhat.com/show_bug.cgi?id=1804548
Fixes: d1eac92784
Reported-by: Jing Yan <jiyan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Relevant code seems to treat forward modes 'route', 'nat', 'open' and 'none'
the same but documentation hasn't reflected that so far.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To fix the actual bug, it was necessary to make networkPlugBandwidth() be
called also for 'bridge'-type networks implemented using macvtap's 'bridge'
mode (previously it was only called for those implemented on top of an
existing bridge).
However, it seems beneficial to call it for other network types as well, at
least because it removes an inconsistency in types of bandwidth configuration
changes permissible in inactive and active domain configs. It should also be
safe as the function pretty much amounts to NOP if no QoS is requested and the
new behaviour should not be any worse than before if it is.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Even if an interface of type 'network', setting 'floor' is only supported
if the network's forward type is nat, route, open or none.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QoS 'floor' setting is documented to be only supported for interfaces of
type 'network'. Fail with an error message on attempt to set 'floor' on
an interface of any other type.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This compound condition will be useful in several places so it
makes sense to give it a name for better readability.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the parsed 'raw' format JSON string has 'offset' or 'size' attributes
parse them as the format slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1791788
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement support for the slice of type 'storage' which allows to set
the offset and size which modifies where qemu should look for the start
of the format container inside the image.
Since slicing is done using the 'raw' driver we need to add another
layer into the blockdev tree if there's any non-raw image format driver
used to access the data.
This patch adds the blockdev integration and setup of the image data so
that we can use the slices for any backing image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When creating overlay images e.g. for snapshots or when merging
snapshots we often specify the backing store string to use. Make the
formatter aware of backing chain entries which have a <slice>
configured so that we record it properly. Otherwise such images
would not work without the XML (when detecting the backing chain).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage slice will require a specific node name in cases when the
image format is not raw. Store and format them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are going to add support for specifying offset and size attributes
which will allow controling where the image and where the guest data
itself starts in the source of the disk. This will be represented by
a <slices> element filled with either a <slice type='storage'> for the
offset of the image format data.
Add the XML documentation and RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically creating such images via libvirt during blockjobs would
be much more hassle than it's worth. Just forbid them for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We support explicit storage slices only when using blockdev. Storage
slices expressed via the backing store string are left to qemu to
open correctly.
Reject storage slices configured via the XML for non-blockdev usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we have a 'format' type slice for a raw driver we can directly format
the values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virStorageSourceSlice which will store the 'offset' and 'size'
of a virStorageSource and declare it as 'sliceStorage' and 'sliceFormat'
attributes of a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows specifying the offset and size into a raw file to expose a
sub-slice of the image to the guest with the raw driver. Libvirt
currently doesn't support it but we can add test case for future
reference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a domain has a NVMe disk it already has the access configured.
Trying to configure it again on a commit or some other operation
is wrong and condemned to failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Its behavior is controlled by a KVM-specific CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Its use is limited to certain guest types, and it only supports
a subset of all possible tick policies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use this capability to detect whether the QEMU binary
supports the kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure we are taking all possible virDomainTimerNameType values
into account. This will make upcoming changes easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt switched to using a UNIX socket for monitors in
2009 for version 0.7.0. It seems unlikely that there is
a running QEMU process that hasn't been restarted for
11 years while also taking a libvirt upgrade. Therefore
we can drop support for opening a PTY for the QEMU
monitor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On FreeBSD 12 the default ulimit settings allow for 100,000
open file descriptors. As a result spawning processes in
libvirt is abominably slow. Fortunately FreeBSD has long
since provided a good solution in the form of closefrom(),
which closes all FDs equal to or larger than the specified
parameter.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When emulating smartcard with host certificates, qemu needs to
be able to read the certificates files. Add necessary code to
add the smartcard certificates file path to the apparmor profile.
Passthrough support has been tested with spicevmc and remote-viewer.
v2:
- Fix CodingStyle
- Add support for 'host' case.
- Add a comment to mention that the passthrough case doesn't need
some configuration
- Use one rule with '{,*}' instead of two rules.
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Users expect to be able to configure the <console> element and see
that configuration reflected into the <serial> element or at least
sticking, however due to our crazy back-compat code that doesn't
always happen.
There's really not much we can do to make this kind of corner cases
work as the user would expect, especially not without introducing
additional complexity in a part of libvirt that already has more
than a fair share of it; we can, however, improve the documentation
so that it will nudge said users in the right direction.
https://bugzilla.redhat.com/show_bug.cgi?id=1770725
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virCommand helper API already has the ability to capture
program output, there's no need to open-code it.
Apart from simplifying the code, the test is marginally faster
due to recent improvements in virCommandMassClose.
Until now, both stderr and stdout were stored in the same buffer.
This change stores stderr separately and expects it to be empty
for all the tests we currently run.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autoptr where possible.
virTestCapsBuildNUMATopology is not converted completely,
because while the VIR_FREE call on cell_cpus is technically
wrong, neither VIR_ALLOC_N nor virBitmapNew can return
an allocation error now so it is effectively dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function returns gboolean.
Compare against the FALSE value from GLib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 2c33532423
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Do not look for exception patterns in ${srcdir}./x-$@
nor the VC_LIST_EXCEPT_DEFAULT variable.
This also removes the default exception for ChangeLog.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This exception is no longer useful since README is just a symlink
to README.md, which is a subject to this check already.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We no longer implement a wrapper over strdup - g_strdup
is preferred.
The use of strncpy was removed in:
commit 7d70a63b94
util: Improve virStrncpy() implementation
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both xen/xend_internal and bootstrap.conf have been deleted from git.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NEWS was replaced by docs/news.html, so the pre-requisite for this
rule is not fulfilled.
Also, PREV_VERSION_REGEXP does not seem to be defined anywhere.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
