Use qemuAgentCommandFull so that callers of qemuAgentGetTimezone can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetOSInfo can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetUsers can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull in qemuAgentGetHostname so that we can suppress
error reports if the caller will not require them. Callers for now
always require error reporting but will be fixed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return 0 on success to match the documentation. The callers only check
for negative values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we don't want to log errors if an agent command is
unsupported. Wire it up into qemuAgentCheckError via qemuAgentCommandFull
and provide a thin wrapper (qemuAgentCommand) to prevent having to fix
all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainGetGuestInfoCheckSupport' despite its name was not checking
whether the info types are supported. Convert the function to return
integers and include the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic has been moved to the individual drivers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, advisory record locking lose the lock if any fd refering
to the file is closed. There doesn't seem to be a way to preserve the
lock atomically. We could eventually retake the lock if low pidfilefd
is required.
This fixes processes being leaked, as they are not killed in
virPidFileForceCleanupPath() if the lock can be taken. Here also, we may
consider this is not good enough, as a process may leak by simply
closing the pidfilefd.
Fixes commit d146105f1e ("virCommand:
Actually acquire pidfile instead of just writing it")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The WIP specification is hosted on slirp wiki at this point:
https://gitlab.freedesktop.org/slirp/libslirp/-/wikis/Slirp-Helper
We would need more feedback from various parties (including libvirt,
podman, and other developpers) before declaring a frozen version.
So for now, follow it, and feedback welcome!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the helper supports DBus, connect it to the bus and set its ID.
If the helper supports migration, register its ID to the list of
dbus-vmstate ID to migrate, and specify --dbus-incoming when
restoring the VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Helper processes may have their state migrated with QEMU data stream
thanks to the QEMU "dbus-vmstate".
libvirt maintains the list of helpers to be migrated. The
"dbus-vmstate" is added when required, and given the list of helper
Ids that must be migrated, on save & load sides.
See also:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus-vmstate.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This avoids trying to start a dbus-daemon when its already running.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the network driver code there's networkKillDaemon() which is
the same as virProcessKillPainfully(). Replace the former with
the later and drop what becomes unused function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the virtiofsd will have the pidfile open
and locked we can use virPidFileForceCleanupPath() to kill it and
unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the slirp helper will have the pidfile
open and locked we can use virPidFileForceCleanupPath() to kill
it and unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that our virCommandSetPidFile() is more intelligent we don't
need to rely on the daemon to create and lock the pidfile and use
virCommandSetPidFile() at the same time.
NOTE that as advertised in the previous commit, this was
temporarily broken, because both virCommand and
qemuProcessStartManagedPRDaemon() would try to lock the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As a part of c799d150d5 I've introduced a test case that
tests whether passing error object between processes works. The
test spawns a child which reports a system error, parent process
then reads the error and compares with expected output. Problem
with this approach is that error message contains stringified
errno which is not portable. FreeBSD has generally different
messages than Linux. Therefore, use g_strerror() to do the errno
to string translation for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qemuBlockStorageSourceGetCookieString which does the
concatenation so that we can reuse it later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU requires an extra wrapper object where only the "file" member is
populated. This is basically a placeholder for establishing the format
layer. We did the same in qemuDiskSourceGetProps for the old-school
JSON usage with -drive but forgot to adopt this for -blockdev.
https://bugzilla.redhat.com/show_bug.cgi?id=1804617
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev libvirt provides the string which is recorded as
'backing store' property of an image to qemu. Add testing for
qemuBlockGetBackingStoreString which generates these strings as there's
logic which determines which format to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We had two non-syncrhonized arrays holding the individual data. This was
a lazy way to do it when I was adding new tests recently. Since it's
hard to extend with new data to test refactor the storage of test data
to use a new struct where all per-image data are kept and can be
extended easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for pretty-printing of the JSON variant of the output for
consumption in tests. All current callers pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was misplaced. Group it together with other helper
functions for testing disk XML to qemu JSON props conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic variable clearing and remove the cleanup sections of
testQemuDiskXMLToProps, testQemuDiskXMLToPropsValidateSchema and
testQemuDiskXMLToPropsValidateFile.
testQemuDiskXMLToPropsValidateFileSrcOnly already uses new helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_TRISTATE_BOOL_ABSENT which maps to the 'default' string would not be
parsed back, so we shouldn't format it either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Based on the configuration from the only qemuxml2argv test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
