Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
When qemuProcessReconnectHelper was introduced (commit d38897a5d)
reconnection failure used VIR_DOMAIN_SHUTOFF_FAILED; however, that
was changed in commit bda2f17d to either VIR_DOMAIN_SHUTOFF_CRASHED
or VIR_DOMAIN_SHUTOFF_UNKNOWN.
When QEMU_CAPS_NO_SHUTDOWN checking was removed in commit fe35b1ad6
the conditional state was just left at VIR_DOMAIN_SHUTOFF_CRASHED.
So introduce qemuDomainIsUsingNoShutdown which will manage the
condition when the domain was started with -no-shutdown so that
when/if reconnection failure occurs we can restore the decision
point used to determine whether CRASHED or UNKNOWN is provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1524230
The qemuBuildVhostuserCommandLine builds command line for
vhostuser type interfaces. It is duplicating some code of the
function it is called from (qemuBuildInterfaceCommandLine)
because of the way it's called. If we merge it into the caller
not only we save a few lines but we also enable checks that we
would have to duplicate otherwise (e.g. QoS availability).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we have variables A, B, C then there are two ways to free
them. Either in the order they are declared or the reversed one.
Any other ordering is confusing. In this commit I'm reordering
calls to VIR_FREE in the reversed order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
A virtio device such as
<controller type='scsi' model='virtio-scsi'/>
will be translated to one of four different QEMU devices
based on the address type. This behavior is the same for
all virtio devices, but unfortunately we have separate
ad-hoc code dealing with each and every one of them: not
only this is pointless duplication, but it turns out
that most of that code is not robust against new address
types being introduced and some of it is outright buggy.
Introduce a new function, qemuBuildVirtioDevStr(), which
deals with the issue in a generic fashion, and rewrite
all existing code to use it.
This fixes a bunch of issues such as virtio-serial-pci
being used with virtio-mmio addresses and virtio-gpu
not being usable at all with virtio-mmio addresses.
It also introduces a couple of minor regressions,
namely no longer erroring out when attempting to
use virtio-balloon and virtio-input devices with
virtio-s390 addresses; that said, virtio-s390 has
been superseded by virtio-ccw such a long time ago
that recent QEMU releases have dropped support for
the former entirely, so re-implementing such
device-specific validation is not worth it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The appropriate time to ensure the required capabilities are
present is validate rather than command line generation: add
a new qemuDomainDeviceDefValidateInput() function and move
all existing checks there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we've only formatted it for virtio-blk-pci and
virtio-blk-ccw, but other virtio-blk devices also support
the corresponding option; moreover, we've always formatted
it for all virtio-scsi devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several functions where we pointlessly duplicate
parts of the format string and pass the same arguments:
refactor them so that the common parts are formatted separately
from the variable parts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow mocking of the file descriptor numbers used for the TPM
passthrough mode by extracting the relevant code into an exported
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a helper which will use a collection of other helpers to determine
whether a disk requires throttling to be enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the backing chain onto the commandline using the 'json' syntax
with -blockdev.
The command line formatter needs only minor tweaks to add the new
entries but we now need to initialize the structures that are used for
every layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow referring to the drives via the QOM id we need to setup the
floppy drives with a proper ID. This means that -device should be used
for them.
There are the following quirks:
- FDC needs to be instantiated prior to any floppy device
- floppy drive specified via -device does not support 'bootindex'
(hacked around by passing bootindexA=1 to the FDC)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are some path where the buffer is not passed to
virCommandAddArgBuffer and therefore the buffer might leak.
==191201== 1,010 bytes in 1 blocks are definitely lost in loss record 826 of 836
==191201== at 0x4C2CE3F: malloc (vg_replace_malloc.c:298)
==191201== by 0x4C2F1BF: realloc (vg_replace_malloc.c:785)
==191201== by 0x5D39E82: virReallocN (viralloc.c:245)
==191201== by 0x5D3E8F2: virBufferGrow (virbuffer.c:150)
==191201== by 0x5D3E9C8: virBufferAdd (virbuffer.c:185)
==191201== by 0x56EAC98: qemuBuildFloppyCommandLineControllerOptions (qemu_command.c:2162)
==191201== by 0x56EB3E1: qemuBuildDisksCommandLine (qemu_command.c:2370)
==191201== by 0x570055E: qemuBuildCommandLine (qemu_command.c:10315)
==191201== by 0x575EA7F: qemuProcessCreatePretendCmd (qemu_process.c:6777)
==191201== by 0x113DAB: testCompareXMLToArgv (qemuxml2argvtest.c:598)
==191201== by 0x13A75B: virTestRun (testutils.c:180)
==191201== by 0x138BE8: mymain (qemuxml2argvtest.c:2975)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fix regression introduced in <42fd5a58adb>. With q35 machine type which
requires the explicitly specified FDC we'd format twoisa-fdc
controllers to the command line as the code was moved to a place where
it's called per-disk.
Move the call back after formatting all disks and reiterate the disks to
find the floppy controllers.
This also moves the '-global' directive which sets up the default
ISA-FDC to the end after all the disks but since we are modifying the
properties it is safe to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the argument is unused we can remove it transitively from all
the call graphs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was never set except for (stale) tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of enum types for struct fields is generally avoided since it causes
warnings if the compiler assumes the enum is unsigned. For example
commit 8e2982b5767a25e5da6533c65bfdc648c95b3c69
Author: Cole Robinson <crobinso@redhat.com>
Date: Tue Jul 24 16:27:54 2018 -0400
conf: Clean up virDomainDefParseCaps
Introduced a line:
if ((def->virtType = virDomainVirtTypeFromString(virttype)) < 0) {
which causes a build failure with CLang
conf/domain_conf.c:19143:65: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
as the compiler is free to optimize away the "< 0" check due to the
assumption that the enum type is unsigned and always in range.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
