Put the emitting of VIR_DOMAIN_EVENT_ID_BLOCK_JOB and
VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2 into a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases backing chain needs to be cleared prior to re-detection.
Move this step out of qemuDomainDetermineDiskChain as only certain
places need it and the function itself is able to skip to the end of the
chain to perform detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since we are re-detecting the backing chain after pivoting to the active
block commit target (or block copy target) the disk index needs to be
reset to 0. This is necessary since we move a member of the backing
chain to disk->src but clear indexes only starting from
disk->src->backingStore. The freshly detected images have indexes
starting from 1, but since we've pivoted into an image which was
previously a backing store it would have a non-0 index.
The lookup function would then return the top of the chain for queries
like 'vda[1]' instead of the first backing store.
This problem will not be present once we keep the disk indexes stable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1519745
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For VMs with persistent config the config may change upon successful
completion of a job. Save it always if a persistent VM finishes a
blockjob. This will simplify further additions.
The status XML would be saved only for the copy job (in case of success)
or on failure even for other jobs. As the status contains the backing
chain data, which change after success we should always save it on
block job completion.
Detect the node names when setting block threshold and when reconnecting
or when they are cleared when a block job finishes. This operation will
become a no-op once we fully support node names.
For the blockjobs, where libvirt is able to track the state internally
we can fix locking of images we can remove the appropriate locks.
Also when doing a pivoting operation we should not acquire the lock on
any of those images since both are actually locked already.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1302168
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Every single call to qemuDomainEventQueue() uses the following pattern:
if (event)
qemuDomainEventQueue(driver, event);
Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch reverts commit 76c61cdca2.
VIR_DOMAIN_DISK_MIRROR_STATE_ABORT says we asked for a block job to be
aborted rather than saying it was aborted. Let's just use
VIR_DOMAIN_DISK_MIRROR_STATE_NONE consistently whenever a block job
finishes since no caller depends on VIR_DOMAIN_DISK_MIRROR_STATE_ABORT
(anymore) to check whether a block job failed or it was cancelled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper is useful for calling qemuBlockJobEventProcess with the
event details stored in disk's privateData, which is the most likely
usage of qemuBlockJobEventProcess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuBlockJobSyncBegin and qemuBlockJobSyncEnd delimit a region of code
where block job events are processed "synchronously".
qemuBlockJobSyncWait and qemuBlockJobSyncWaitWithTimeout wait for an
event generated by a block job.
The Wait* functions may be called multiple times while the synchronous
block job is active. Any pending block job event will be processed by
only when Wait* or End is called. disk->blockJobStatus is reset by
these functions, so if it is needed a pointer to a
virConnectDomainEventBlockJobStatus variable should be passed as the
last argument. It is safe to pass NULL if you do not care about the
block job status.
All functions assume the VM object is locked. The Wait* functions will
unlock the object for as long as they are waiting. They will return -1
and report an error if the domain exits before an event is received.
Typical use is as follows:
virQEMUDriverPtr driver;
virDomainObjPtr vm; /* locked */
virDomainDiskDefPtr disk;
virConnectDomainEventBlockJobStatus status;
qemuBlockJobSyncBegin(disk);
... start block job ...
if (qemuBlockJobSyncWait(driver, vm, disk, &status) < 0) {
/* domain died while waiting for event */
ret = -1;
goto error;
}
... possibly start other block jobs
or wait for further events ...
qemuBlockJobSyncEnd(driver, vm, disk, NULL);
To perform other tasks periodically while waiting for an event:
virQEMUDriverPtr driver;
virDomainObjPtr vm; /* locked */
virDomainDiskDefPtr disk;
virConnectDomainEventBlockJobStatus status;
unsigned long long timeout = 500 * 1000ull; /* milliseconds */
qemuBlockJobSyncBegin(disk);
... start block job ...
do {
... do other task ...
if (qemuBlockJobSyncWaitWithTimeout(driver, vm, disk,
timeout, &status) < 0) {
/* domain died while waiting for event */
ret = -1;
goto error;
}
} while (status == -1);
qemuBlockJobSyncEnd(driver, vm, disk, NULL);
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
We will want to use synchronous block jobs from qemu_migration as well,
so split this function out into a new source file.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
