In virtpm.h there are two functions exposed for querying swtpm
and swtpm_setup capabilities: virTPMSwtpmCapsGet() and
virTPMSwtpmSetupCapsGet(), respectively. The capabilities we are
interested in are defined in two separate enums
(virTPMSwtpmFeature and virTPMSwtpmSetupFeature), but these
functions accept capability as an unsigned int rather than their
respective enum. While this makes sense for
virTPMBinaryGetCaps(), which is a module internal helper that
both exposed functions call, there's no need for the functions
themselves to accept unsigned int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, virJSONValueObjectHasKey() can return one of three
values:
-1 if passed object type is not VIR_JSON_TYPE_OBJECT,
0 if the key is not present, and finally
1 if the key is present.
But, neither of callers is interested in the -1 case. In fact,
some callers call this function treating -1 and 1 cases the same.
Therefore, make the function return just true/false and fix few
callers that explicitly checked for == 1 case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The G_GNUC_NO_INLINE macro will eventually be marked as
deprecated [1] and we are recommended to use G_NO_INLINE instead.
Do the switch now, rather than waiting for compile time warning
to occur.
1: 15cd0f0461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, we require glib-2.56.0 at minimum (because of RHEL-8)
but we use G_GNUC_NO_INLINE which was introduced in 2.58.0. While
we provide an implementation for older versions, where the macro
does not exists, it's a bit more tricky than that. Since we
define GLIB_VERSION_MAX_ALLOWED we would get a compile time error
when trying to use something too new, except for G_GNUC_NO_INLINE
which was intentionally not marked as
GLIB_AVAILABLE_MACRO_IN_2_58. But this is about to change with
glib-2.73.2 (which contains commit [1]).
At the same time, we can't just bump glib and thus we have to
provide an alternative implementation without the version
annotation.
1: a6f8fe071e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These new capabilities will be used only to track whether
swtpm_setup is capable of TPM-1.2 and/or TPM-2.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is a partial revert of 87a43a907f0ad4897a28ad7c216bc70f37270b93
The change to use g_clear_pointer() in more places was accidentally
applied to cases involving vir_g_source_unref().
In some cases, the ordering of g_source_destroy() and
vir_g_source_unref() was reversed, which resulted in the source being
marked as destroyed, after it is already unreferenced. This
use-after-free case might work in many cases, but with versions of
glib older than 2.64.0 it may defer unref to run within the main
thread to avoid a race condition, which creates a large distance
between the g_source_unref() and g_source_destroy().
In some cases, the call to vir_g_source_unref() was replaced with a
second call to g_source_destroy(), leading to a memory leak or worse.
In our experience, the symptoms were that use of libvirt-python became
slower over time, with OpenStack nova-compute initially taking around
one second to periodically query the host PCI devices, and within an
hour it was taking over a minute to complete the same operation, until
it is was eventually running this query back-to-back, resulting in the
nova-compute process consuming 100% of one CPU thread, losing its
RabbitMQ connection frequently, and showing up as down to the control
plane.
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For some types of SRIOV interfaces we create a temporary file
where the state of the interface is saved before we start
modifying it. The file is used then to restore the original
configuration when the interface is no longer associated with any
guest. For writing the file virFileWriteStr() is used. However,
it's given wrong argument: the last argument is supposed to be
mode to create the file with but virNetDevSaveNetConfig() passes
open(2) flags (O_CREAT|O_TRUNC|O_WRONLY). We need the file to be
writable and readable by root only (0600). Therefore, pass that
mode instead of gibberish.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit v7.1.0-136-g6a6d6bb520 refactored virProcessSetMaxMemLock by
moving its part into a new virProcessSetLimit, but lost "return -1" on
error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For easier attribute parsing we have virXMLProp*() family of
functions. These accept flags through which a caller can pose
some conditions onto the attribute value, for instance:
VIR_XML_PROP_NONZERO when the attribute may not be zero, etc.
What we are missing is VIR_XML_PROP_NONNEGATIVE when the
attribute value may be non-negative. Obviously, this flag makes
sense only for some members of the virXMLProp*() family.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to the 'k' modifier for integers introduce 'K' for long
integers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We've emulated the function in virHashSteal, with a note pointing to use
the proper version. Move the code to glibcomapt.c and make it such that
builds using newer glib already use the new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detected by gcc 11 -Wformat-overflow:
../../src/util/vircgroupv1.c: In function ‘virCgroupV1ValidatePlacement’:
../../src/util/virerror.h:176:5: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
176 | virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
177 | __FUNCTION__, __LINE__, __VA_ARGS__)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/util/vircgroupv1.c:411:13: note: in expansion of macro ‘virReportError’
411 | virReportError(VIR_ERR_INTERNAL_ERROR,
| ^~~~~~~~~~~~~~
../../src/util/vircgroupv1.c:412:80: note: format string is defined here
412 | _("Could not find placement for v1 controller %s at %s"),
| ^~
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have our own implementation of setns() which was introduced in
v1.2.9-rc1~190 and extended afterwards. The reason was that back
in 2014 we were dealing with glibc that in some of its older
versions did not provide the function. Mostly for non-intel
arches. Nevertheless, glibc now offers the function for all
architectures we care about (aarch64 being the freshest
architecture where the function was introduced, in glibc-2.17).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The website no longer exists and the PDF file can't even be
retrieved via archive.org.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a method to parse a ccw device address from a string.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virCCWDeviceAddressParseFromString and use it in nodedev udev.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressEqual into virccw and rename method as
virCCWDeviceAddressEqual.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainDeviceCCWAddressIsValid into virccw and rename method
as virCCWDeviceAddressIsValid.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor virDomainCCWAddressIncrement into virccw and rename method as
virCCWDeviceAddressIncrement.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move virDomainCCWAddressAsString into virccw and rename method as
virCCWDeviceAddressAsString.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor ccw data structure virDomainDeviceCCWAddress into util virccw.h
and rename it as virCCWDeviceAddress.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the port allocator bitmap does not have enough bits to keep the state
of the port we're going to release, the port is not reserved and thus is
trivially released without doing anything. No need to report an error in
such case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactor the code to use virTypedParamList which simplifies cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The helper constructs a virTypedParamList from loose params.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The returned value is used to unlock the object, so all callers must
necessarily make use of the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last use of this function was removed in commit 6d161bcc, so the
function is no longer used except as an internal implementation for
virCommandPassFD().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
commit f9236200 removed the last use of this function, so it can be
dropped.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
where it can be reused by other helpers.
No changes other than the move.
Note that this makes iohelper now dependent on -lutil and -lacl.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
this is in preparation for a minor refactoring of the copy
function itself out of runIO().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past, we did set VLAN tag on <interface type='direct'/>.
However, during rewrite (v8.1.0-rc1~191) virNetDevSetVfConfig()
was changed and a condition that was responsible for calling
a function that sets VLAN tag was changed accidentally resulting
in VLAN tag not being set anymore.
However, because of other changes in the same patchset, it may
happen that @adminMac is NULL (this is to work around yet another
broken SRIOV driver), and thus we must refrain from setting MAC
and have to set VLAN tag only.
Fixes: 73961771a1cfec3c0f43caec9d117d2fbcc7af39
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virNetDevSetVfMac() is called with either @macaddr or
@allowRetry arguments NULL an error is reported, because this is
considered invalid use. However, the error message is not
informative as it could be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
AMD cpus report Core (compute unit) identifiers of the cpu running the
instruction under leaf 0x8000001e. This data is not needed for libvirt
and actually breaks caching of the qemu capabilities where we check that
all of the CPU flags to be identical.
Mask out all of leaf 0x8000001e.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Raise the lower bound to '64' as that seems to currently be the first
size that can fit the CPU data for a modern cpu.
Lower the upper bound to an arbitrary 65536. So many cpu features ougth
to be enough for everyone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case when the 'KVM_GET_SUPPORTED_CPUID' ioctl on /dev/kvm would
fail for other reason than the documented E2BIG, our code would continue
looping and calling it while always increasing the memory buffer even
when that will not help.
Rewrite the function to allow another iteration only with the correct
errno.
Additionally rename the 'i' variable to 'alloc_size' as it's not a pure
iterator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the filtering code into virHostCPUGetCPUIDFilterVolatile.
This also removes a safe but very questionable reuse of 'i' iterator in
the both the top level and nested loop. It's safe for now as the to
level loop will not iterate any more in the current state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
