It's been an optional build time dependency for a long time, so
if Meson couldn't find it the only consequence was that libvirt
would look for it at runtime instead, which is what we are doing
for most of our non-library dependencies anyway.
Since 5c98d1cee0 we've stopped even looking for it at build
time, so there's no point in having it installed in the build
environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We no longer need its contents.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're no longer performing build time detection.
Fixes: 506c3a39d6
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It is only needed if compatibility with clients that have
libvirt < 6.9.0 is required, and can be uninstalled otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reduce the delta in an upcoming change.
No change in behavior intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Fixes: 50eae3f885
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These daemons do not have any support for unprivileged readonly
access, so we must not reference -ro.socket units in scripts.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1945420
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.
Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In a50c473ad6 ("qemu: move temp file of screenshot and memorypeek to
per-domain dir") and c4f3c955d5 ("qemu: don't change ownership of
cache directory"), I move the temporary files of screenshot and
memorypeek from the cache directory to per-domain directory, and the
only user of the cache directory is the domain capabilities currently.
Since the domain capabilities are used by libvirtd, no need to set the
ownership of the cache directory to qemu_user and qemu_group.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b5e8db8f14 tuned the SPEC file so that libvirt daemons restart
on package upgrade. In order to do that it added a bunch of
parametrized macros using the %global directive. This caused a problem
when running RPM builds on CentOS Stream 8 resulting in:
error: Too many levels of recursion in macro expansion. It is likely
caused by recursive macro declaration.
error: Macro %libvirt_daemon_perform_restart failed to expand
error: line 1275: %global libvirt_daemon_perform_restart() \
if test %libvirt_daemon_needs_restart %1 \
then \
/bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \
fi \
%libvirt_daemon_finish_restart %1
There are 2 important differences between %global and %define
directives:
1) %define is local-only and does have scope - in reality though, its
scope is apparently not really enforced because it behaves exactly
the same way as %global
2) %define is evaluated at the time of use while %global is evaluated
at the time of definition
The latter and the fact the macro is parametrized is the reason why the
RPM builds fails on CentOS. Strangely enough this only happens on
CentOS Stream, but not Fedora (which is also the main proponent of
replacing %define with %global). Anyhow, replacing %global with %define
makes the rpmbuild to pass on both and along with package upgrades.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While s390x doesn't have NUMA nodes it has libnuma which is still
helpful as it parses sysfs for us and kernel emulates NUMA#0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The hypervisor drivers can be disabled in certain build scenarios, so
their corresponding post scripts need to match.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to enable or disable the modular daemons with systemd after the
RPM install/uninstall.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for enabling/disabling daemons post/postun-install has a
bit of duplication across the different part of the spec, due to the
number of socket units involved. This is going to get much worse with
the need to enable/disalbe modular daemons, so benefits from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons all need restarting to ensure they pick up the newly
installed code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we restart libvirtd if the nwfilter/network configs have
changed. We need to take account of possibility that the modular
daemons are in use instead though.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for restarting daemons post-transaction has a bit of
duplication across the different part of the spec. This is going to
get much worse with the need to restart modular daemons, so benefits
from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we use git to manage RPM applied patches, we need to disable both
meson's -Werror config knob and libvirt's equivalent.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The macro can take multiple arguments, and the calls are more efficient
if done in one go.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Similar knobs, such as firewalld_zone and sysctl_config, are
already features, so convert this one as well to comply with
expectations.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to be explicit about which features are enabled in our
RPM build instead of relying on default values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In recent commit f772c1fd2a a misaligned %endif sneaked in which
upsets syntax-check. Align it properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Support for glusterfs with KVM is being dropped in RHEL-9 in the
virtualization stack.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically PowerPC 64 was always supported with qemu-kvm in RHEL.
In future RHEL-9 it is being discontinued and this was addressed
in
commit 03cc3c9064
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Wed Apr 21 14:55:03 2021 +0200
spec: Do not build qemu driver for Power on RHEL-9
when the specfile was cleaned up to remove RHEL-7 support:
commit 0f601d2f86
Author: Andrea Bolognani <abologna@redhat.com>
Date: Wed May 5 19:30:46 2021 +0200
spec: Bump min_fedora and min_rhel
it also removed the logic that applied to RHEL-8 wrt arch list
and lost PowerPC 64 support on 8. This reverts that part of the
change but with the condition reversed to prioritize the future
state.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt-daemon package now provides the 'libvirt-admin' virtual
name, but the Provides stanza doesn't declare version information,
which breaks things depending on that package using a versioned
dependency. Fix this by setting the version-release of libvirt to
that name to mimic the previous state.
Fixes: 2244ac168d
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is automatically picked up by the dependency generator, so
there's no reason to have this here.
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's only used in one place, and it's nicer to keep the error
message close to the check that causes it to be emitted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The rewritten checks, which made it possible to drop the
variable, are in fact not equivalent to the original ones,
and rewriting them once again so that they are would make
them unwieldy. Let's go back to how things were.
Reverts: 69c8d5954e
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
It's only used in one place, and it's nicer to keep the error
message close to the check that causes it to be emitted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to our platform support policy
https://libvirt.org/platforms.html
RHEL 7 and all versions of Fedora older than 33 are going to
be out of scope by the time libvirt 7.4.0 is released.
Dropping RHEL 7 in particular allows us to greatly simplify
many parts of the spec file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's now empty, so no point in keeping it around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current setup uses a single script that is symlinked twice
and that tries to configure bash completion for both virsh and
virt-admin, even if only one of them is installed. This also
forces us to have a -bash-completion RPM package that only
contains the tiny shared file.
Rework bash completion support so that two scripts are
generated, each one tailored to a specific command.
Since the shared script no longer exists after this change,
the corresponding RPM package becomes empty.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Any application that uses the libraries can take advantage of
the systemtap probes, so they should be shipped in the -libs
package rather than in -client.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The -client package's purpose is enabling remote machines to
connect to a virtualization host, but the virt-host-validate
and libvirt-guests tools are designed to be run directly on
the virtualization host and as such are a better fit for the
-daemon package.
With this change, installing and removing the -client package
no longer needs to touch the systemd configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's useful to have virt-admin around when debugging issues
with libvirtd, and since it's a tiny binary we can simply
include it in the -daemon package to ensure it's always going
to be available when needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
make is only used for the syntax-check tests, which we are
explicitly skipping when building RPMs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few uses of g_autoslist in the qemu driver and likely more
will come throughout the codebase in the future. g_autoslist first
appeared in glib 2.56, so bump the minimum version
https://developer.gnome.org/glib/stable/glib-Miscellaneous-Macros.html#g-autoslist
Bumping the minimum version is an opportune time to update the list of
minimum glib versions found on the distros targeted by libvirt's
platform support policy
RHEL-7: 2.56.1
RHEL-8: 2.56.4
Debian (Buster): 2.58.3
OpenBSD (Ports): 2.66.7
FreeBSD (Ports): 2.66.7
openSUSE Leap 15.2, SLE15-SP2: 2.62.6
Ubuntu (Bionic): 2.56.1
macOS (Homebrew): 2.66.7
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I *thought* I had tested all the combinations of manually setting
--without netcf, different versions of Fedora, etc, but apparently
not.
The check in libvirt.spec.in to see if the target was an older Fedora
or older RHEL would alway resolve to true, because, e.g., if {?fedora}
is undefined, then "0%{?fedora} < 34" is "0 < 34", which is always
true. Since both {?fedora} and {?rhel} are never defined at the same
time, the result of the entire expression is always true.
Fix this by qualifying each subexpression.
Fixes: 35d5b26aa4
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt.spec currently adds a hardcoded -Dnetcf=enabled to the meson
commandline, so just setting the default in the meson.build file won't
have any effect for rpm builds - it will be overridden.
This patch changes the meson commandline in the spec file from
hardcoded -Dnetcf=enabled to %{arg_netcf}, which is itself set
according to the value of %{with_netcf}; and *that* is normally set
according to the distro release of the build target (1 for Fedora >=
34 and RHEL >= 9, 0 otherwise), but can be manually overridden by
adding "-without netcf" to the rpmbuild commandline.
Along with being used to determine what arg to pass to meson,
%{with_netcf} is also checked when deciding on whether or not to add
netcf build time / install time dependencies ("Requires: netcf-libs"
and "BuildRequires: netcf-devel")
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With meson, we don't need the gettext headers anymore, meson takes care
of that and we only need to have xgettext installed.
Without this patch RPM build in Fedora containers fails.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests time out when building in slow environments, like emulated
s390x in Fedora copr. Bump up the test timeout
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stanzas like "0%{?fedora} && 0%{?fedora} >= %{min_fedora}" contain
redundant definitions, as "0%{?fedora} >= %{min_fedora}" implies that
"%fedora" is defined and has a value. Thus, we can simplify this.
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As soon as a guest using a <tpm> device is launched, libvirt will change
the ownership to 'tss' user and group, with mode 0730, which will cause
RPM verify to then fail.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These are needed for the <tpm> devices to be usable.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Nwfilter can be edited by the user and we don't want to overwrite the editings.
Also the filters in %{datadir} does not have UUIDs and these are generated on
libvirtd start. Thus this patch also fixes regeneration of UUIDs on libvirtd
update.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We're no longer generating a UUID during installation, so we
clearly don't need to strip it afterwards; and since the network
driver is perfectly capable of generating a UUID if necessary, we
don't need to do that at %post time either.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
wireshark plugin was disabled in RHEL because RHEL-7 was too old, but we
forgot to enable it in RHEL-8 where it builds fine.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We only turn on with_wireshark if we already know the distro is
guaranteed to have new enough packages. The versioned dep is thus not
required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The %meson macro sets "--auto-features=enabled", so it is not enough to
disable the driver options, we must also disable any library options
which the drivers depend on.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As explained in the original commit (31d687a321), these values
are actually unaffected by the corresponding _without_* macros
and so we can leave out the additional processing / obfuscation.
This reverts commit ae23a87d85.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The %meson macro sets "--auto-features=enabled", thus any feature in the
RPM which has a "with_XXX" condition, needs to explicitly pass a
"-DXXX=state" arg to %meson to override the auto features setting.
The with_libssh and with_libssh2 conditions were not exposed to meson,
so if either was set disabled, then meson would fail the build if the
-devel packages were not found.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The %meson macro sets "--auto-features=enabled", thus any feature in the
RPM which has a "with_XXX" condition, needs to explicitly pass a
"-DXXX=state" arg to %meson to override the auto features setting.
The with_bash_completion condition is always set to 1, so rather than
adding an arg to %meson, just remove the condition.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As it turns out, the rather complicated structure that is
currently used for enabling or disabling features in the libvirt
build does not cleanly map well to RPM's bcond feature.
Consequently, we need these back in order to support trivially
activating these features through extra macros as build inputs.
This reverts commit 31d687a321.
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A binutils change has caused breakage when linking the tests
/usr/bin/ld: tests/libtest_qemu_driver.so: undefined reference to `__open_missing_mode'
This is probably a regression in binutils, so disable LTO until we get
more clarity on the root cause and whether binutils or libvirt will need
changing.
https://bugzilla.redhat.com/show_bug.cgi?id=1889763
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This caused
DEBUG: meson.build:2149:2: ERROR: Problem encountered: You must have numactl enabled for numad support.
on s390x.
Fixes: 974dc0a4c6
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The rpath improvements in:
commit 69980ab798
Author: Andrea Bolognani <abologna@redhat.com>
Date: Wed Aug 19 11:15:35 2020 +0200
meson: Improve RPATH handling
missed that Fedora's %meson macro sets --auto-features=enabled, thus
force enabling rpath in the RPM build. Thus we need to explicitly
disable it
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Letai <dani@letai.org.il>
With this commit, all architecture lists that we base feature
enablement decisions on are defined within a few lines of each
other, increasing maintainability.
Additionally, generic architecture lists that appear in the
conditions for multiple features are defined, so that repetition
is reduced.
Note that a few checks (numactl, zfs, ceph) have been changed
from %ifarch to %ifnarch for consistency: while doing so, the
corresponding list of architectures has also been replaced with
the complement of the original one to ensure the overall behavior
would be preserved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There's no need to set a default for it if we're going to override
it immediately afterwards anyway, and setting with_qemu_tcg at the
same time only makes things more confusing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Neither Fedora nor RHEL build packages on this architecture.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
It belongs before package-specific feature flags are defined.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
To keep things maintainable, we want to have architecture handling
all in one spot instead of sprinkling %ifarch conditionals all over
the place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The right-hand side of these expressions will always evaluate to
zero. Stop obfuscating this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Bug fixes and comments specific to older versions have been removed.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
