Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Per the typical use of libvirt is to fork the qemu process with
qemu:qemu. Setting the pool permission mode as 0700 by default
will prevent the guest start with permission reason.
Define macro for the default pool and vol permission modes
incidentally.
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reported by Jason Helfman as a build-breaker on FreeBSD.
* src/conf/domain_conf.c (virDomainFSDefParseXML): Use POSIX
spelling.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
Below patch fixes this coverity report:
/libvirt/src/conf/nwfilter_conf.c:382:
leaked_storage: Variable "varAccess" going out of scope leaks the storage it points to.
If the user specified invalid protocol type in a network's SRV record
the error path ended up in freeing uninitialized pointers causing a
daemon crash.
*network_conf.c: virNetworkDNSSrvDefParseXML(): initialize local
variables
virConnectDomainEventRegisterAny() takes a domain as an argument.
So it should be possible to register the same event (be it
VIR_DOMAIN_EVENT_ID_LIFECYCLE for example) for two different domains.
That is, we need to take domain into account when searching for
duplicate event being already registered.
Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written
Introduce a new syntax for filesystems to allow use of a RAM
filesystem
<filesystem type='ram'>
<source usage='10' units='MiB'/>
<target dir='/mnt'/>
</filesystem>
The usage units default to KiB to limit consumption of host memory.
* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wraps the conversion from 'char *name' to virDomainSnapshotPtr in
a reusable manner.
* src/conf/virdomainlist.h (virDomainListSnapshots): New declaration.
* src/conf/virdomainlist.c (virDomainListSnapshots): Implement it.
* src/libvirt_private.syms (virdomainlist.h): Export it.
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups. For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.
Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
Until now, it was possible to crash libvirtd when defining domain with
channel device with missing source element.
When creating new virDomainChrDef, target.port is set to -1, but
unfortunately it is an union with addresses that virDomainChrDefFree
tries to free in case the deviceType is channel. Having the port set
to -1 is intended, however the cleanest way to get around the problems
with the crash seems to be renumbering the VIR_DOMAIN_CHR_CHANNEL_
target types to cover new NONE type (with value 0) being the default
(no target type yet).
Another case where we can do the same amount of work with fewer
lines of redundant code, which will make adding new filters easier.
* src/conf/domain_conf.c (virDomainSnapshotNameData): Adjust
struct.
(virDomainSnapshotObjListCount): Delete, now taken care of...
(virDomainSnapshotObjListCopyNames): ...here.
(virDomainSnapshotObjListGetNames): Adjust caller to handle
counting.
(virDomainSnapshotObjListNum): Simplify.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This idea was first suggested by Daniel Veillard here:
https://www.redhat.com/archives/libvir-list/2011-October/msg00353.html
Now that I am about to add more complexity to snapshot listing, it
makes sense to avoid code duplication and special casing for domain
listing (all snapshots) vs. snapshot listing (descendants); adding
a metaroot reduces the number of code lines by having the domain
listing turn into a descendant listing of the metaroot.
Note that this has one minor pessimization - if we are going to list
ALL snapshots without filtering, then virHashForeach is more efficient
than recursing through the child relationships; restoring that minor
optimization will occur in the next patch.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Repurpose some fields.
(virDomainSnapshotDropParent): Drop unused parameter.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListCount): Simplify.
(virDomainSnapshotFindByName, virDomainSnapshotSetRelations)
(virDomainSnapshotDropParent): Match new field semantics.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Adjust clients.
This patch adds common code to list domains in fashion used by
virListAllDomains with all currently supported flags. The header file
also contains macros that group filters together that are used to
shorten filter conditions.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
The goal of this patch is to prepare for support for multiple IP
addresses per interface in the DHCP snooping code.
Move the code for the IP address map that maps interface names to
IP addresses into their own file. Rename the functions on the way
but otherwise leave the code as-is. Initialize this new layer
separately before dependent layers (iplearning, dhcpsnooping)
and shut it down after them.
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of
"any" [default] (existing IP learning code), "none" (static only addresses)
or "dhcp" (DHCP snooping).
Active leases are saved in a lease file and reloaded on restart or HUP.
The following interface XML activates and uses the DHCP snooping:
<interface type='bridge'>
<source bridge='virbr0'/>
<filterref filter='clean-traffic'>
<parameter name='CTRL_IP_LEARNING' value='dhcp'/>
</filterref>
</interface>
All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
and use it for virDomainParseMemory. This allows to parse arbitrary
scaled value, not only memory related values as needed for the
filesystem limits code following later in this series.
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.
On the command line iptables supports ipset using
iptables ... -m set --match-set <ipset name> <flags> -j ...
where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:
iptables -A INPUT -m set --match-set test src,src -j ACCEPT
Since ipset management is quite complex, the idea was to leave ipset
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.
Using XML to describe an ipset in an nwfilter rule would then look as
follows:
<rule action='accept' direction='in'>
<all ipset='test' ipsetflags='src,src'/>
</rule>
The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.
FYI: Here is the man page for ipset:
https://ipset.netfilter.org/ipset.man.html
Regards,
Stefan
The uhci1, uhci2, uhci3 companion controllers for ehci1 must
have a master start port set. Since this value is predictable
we should set it automatically if the app does not supply it
The virDomainDeviceInfoIsSet API was only checking if an
address or alias was set in the struct. Thus if only a
rom bar setting / filename, boot index, or USB master
value was set, they could be accidentally dropped when
formatting XML
Detected by valgrind. Leaks are introduced in commit 122fa379.
src/conf/storage_conf.c: fix memory leaks.
How to reproduce?
$ make && make -C tests check TESTS=storagepoolxml2xmltest
$ cd tests && valgrind -v --leak-check=full ./storagepoolxml2xmltest
actual result:
==28571== LEAK SUMMARY:
==28571== definitely lost: 40 bytes in 5 blocks
==28571== indirectly lost: 0 bytes in 0 blocks
==28571== possibly lost: 0 bytes in 0 blocks
==28571== still reachable: 1,054 bytes in 21 blocks
==28571== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
No useful error was being reported when an invalid character device
target type is specified in the domainXML. E.g.
...
<console type="pty">
<source path="/dev/pts/2"/>
<target type="kvm" port="0"/>
</console>
...
resulted in
error: Failed to define domain from x.xml
error: An error occurred, but the cause is unknown
With this small patch, the error is more helpful
error: Failed to define domain from x.xml
error: XML error: unknown target type 'kvm' specified for character device
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
