- systemctl and the %systemd_* RPM macros can take multiple unit names
in the one invocation. Make use of this to avoid repeated systemd
daemon reloads.
- virtlockd was only properly enabled and disabled when using systemd,
but when systemd RPM macros were not available (e.g. on Fedora < 18).
Make sure it's enabled when systemd RPM macros are present, or when
using initscripts.
- Always use "reload" on virtlockd, not "condrestart". This allows it to
cleanly re-execute itself without losing running state. Ignore any
error should the reload fail.
- Move the reloading of virtlockd and libvirtd via their initscripts
into the daemon package's %postun scriptlet. These services must be
restarted after all of the libvirt-daemon-driver-* packages have
been upgraded during the same RPM transaction.
- Add a %triggerpostun executed only when upgrading an older
libvirt-daemon. As an older package would only reload libvirtd during
%post, and the newer package would only reload libvirtd during
%postun, such an upgrade would not reload libvirtd at all without the
trigger.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
SIGHUP is commonly used to instruct a daemon to reload its config. For
now we should handle it in virtlockd just like SIGUSR1, rather than
having it kill the process.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- Use SIGUSR1, not SIGHUP, on reload. At present, virtlockd only
responds to the former.
- Fix PID file for virtlockd.
- Do not start virtlockd in any runlevels by default. It needs to be
explicitly selected in libvirt's qemu.conf anyway, so there is no
need to have it running on all systems regardless.
- Fix chkconfig priorities to ensure virtlockd is started before
libvirtd is started, and stopped after libvirtd is stopped.
- Add "Should-Start: virtlockd" to the libvirtd initscript's LSB header,
for the same reason.
- Add "Default-Stop" to both libvirtd and virtlockd initscripts. LSB
does not guarantee that this defaults to the inverse of
"Default-Start".
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- Pass VIRTLOCKD_ARGS through to virtlockd.
- Use SIGUSR1, not SIGHUP, in ExecReload. At present, virtlockd only
responds to the former.
- Have "systemctl enable virtlockd.service" enable virtlockd.socket,
rather than throw an error.
- Make virtlockd.socket wanted by sockets.target, rather than
multi-user.target. This is consistent with other socket units in
Fedora, and it ensures that the socket is available before libvirtd is
started.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When changing memtune limits to unlimited with AFFECT_CONFIG, the
values in virDomainDef are set to PARAM_UNLIMITED, which causes the
whole <memtune> to be formatted. This can be changed in all drivers,
but it also makes sense to use the default (0) as another value for
"unlimited", since zero memory limit makes no sense.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For dead domains that have no memtune limits, we return 0 instead of
"unlimited", this patch fixes it to return PARAM_UNLIMITED.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since kernel 3.12 (commit 34ff8dc08956098563989d8599840b130be81252 in
linux-stable.git in particular) the value for 'unlimited' in cgroup
memory limits changed from LLONG_MAX to ULLONG_MAX. Due to rather
unfortunate choice of our VIR_DOMAIN_MEMORY_PARAM_UNLIMITED constant
(which we transfer as an unsigned long long in Kibibytes), we ended up
with the situation described below (applies to x86_64):
- 2^64-1 (ULLONG_MAX) -- "unlimited" in kernel = 3.12
- 2^63-1 (LLONG_MAX) -- "unlimited" in kernel < 3.12
- 2^63-1024 -- our PARAM_UNLIMITED scaled to Bytes
- 2^53-1 -- our PARAM_UNLIMITED unscaled (in Kibibytes)
This means that when any number within (2^63-1, 2^64-1] is read from
memory cgroup, we are transferring that number instead of "unlimited".
Unfortunately, changing VIR_DOMAIN_MEMORY_PARAM_UNLIMITED would break
ABI compatibility and thus we have to resort to a different solution.
With this patch every value greater than PARAM_UNLIMITED means
"unlimited". Even though this may seem misleading, we are already in
such unclear situation when running 3.12 kernel with memory limits set
to 2^63.
One example showing most of the problems at once (with kernel 3.12.2):
# virsh memtune asdf --hard-limit 9007199254740991 --swap-hard-limit -1
# echo 12345678901234567890 >\
/sys/fs/cgroup/memory/machine/asdf.libvirt-qemu/memory.soft_limit_in_bytes
# virsh memtune asdf
hard_limit : 18014398509481983
soft_limit : 12056327051986884
swap_hard_limit: 18014398509481983
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were unconditionally removing the device from the host list, when it
should only be done on error.
This fixes USB collision detection when hotplugging the same device to
two guests.
If we hit a collision, we free the USB device while it is still part
of our temporary USBDeviceList. When the list is unref'd, the device
is free'd again.
Make the initial device freeing dependent on whether it is present
in the temporary list or not.
Similar to what Jiri did for cgroup setup/teardown in 05e149f94, push
it all into the device handler functions so we can do the necessary prep
work before claiming the device.
This also fixes hotplugging USB devices by product/vendor (virt-manager's
default behavior):
https://bugzilla.redhat.com/show_bug.cgi?id=1016511
The libvirt-daemon package contains several driver-specific files,
directories, and script, which can be problematic when building the
package with multiple hypervisor support, e.g. both QEMU and Xen.
E.g. installing a QEMU+Xen enabled libvirt-daemon on a Xen-only system
will result in the creation of qemu and kvm groups and a qemu user.
Move the driver-specific files, directories, and script to the
respective driver subpackages.
The daemon-config-{network,nwfilter} subpackages are built regardless
of whether or not with_driver_modules is defined, therefore don't
conditionally define their files list.
Currently, if virFileMakePath() fails, the @ret is left initialized from
virAsprintf() just a few lines above leading to a wrong return value of
zero whereas -1 should be returned.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1035108
When attempting to enable more vCPUs in the guest than is currently
enabled in the guest but less than the maximum count for the VM we
currently reported an unhelpful message:
error: internal error: guest agent reports less cpu than requested
This patch changes it to:
error: invalid argument: requested vcpu count is greater than the count
of enabled vcpus in the domain: 3 > 2
https://bugzilla.redhat.com/show_bug.cgi?id=1035118
When outputting the XML for the RNG device, the code didn't format the
PCI address info. Additionally the schema wasn't expecting the info
although it was being parsed and used internally. Fix those mistakes and
add test for the PCI info section.
When changing the parsing and formatting functions in commit
43f2ccdc73 I forgot to update the qemu
disk alignment function for snapshots that automatically adds snapshot
configs for disks that were not mentioned in the XML. The function
allocated a new disk snapshot definition but did not correctly
initialize the snapshot disk source type variable. This resulted into
the disks considered as block devices and invalid XML was generated.
Reported by John Ferlan.
In 78839da I am trying to join the worker threads. However, I can't
sipmly reuse pool->nWorkers (same applies for pool->nPrioWorkers),
because of the following flow that is currently implemented:
1) the main thread executing virThreadPoolFree sets pool->quit = true,
wakes up all the workers and wait on pool->quit_cond.
2) A worker is woken up and see quit request. It immediately jumps of
the while() loop and decrements pool->nWorkers (or pool->nPrioWorkers in
case of priority worker). The last thread signalizes pool->quit_cond.
3) Main thread is woken up, with both pool->nWorkers and
pool->nPrioWorkers being zero.
So there's a need to copy the original value of worker thread counts
into local variables. However, these need to set *after* the check for
pool being NULL (dereferencing a NULL is no no). And for safety they can
be set right after the pool is locked.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There were plenty snapshot XMLs in the tests/domainsnapshotxml2xmlin
directory that actually weren't used in XML testing. The upgraded
domainsnapshotxml2xml test now allows us to use them.
Until now the test was only testing redefinition of snapshot XMLs stored
in tests/domainsnapshotxml2xmlout. This patch adds new infrastructure to
allow testing of files that may differ and will allow to utilize files
in tests/domainsnapshotxml2xmlin as new tests too.
The 'internal' variable holds only two states; convert it to a boolean
and the 'fail' label should be called 'cleanup'. This patch also fixes a
minor memory leak of driver capabilities in case the XML config object
can't be allocated.
