When building command line for IOMMU or machine, there are two
comments which mention function that validate IOMMU. But they
both refer to old name which was changed in v6.3.0-rc1~246.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Correct the log name for qemu_security.c to qemu.qemu_security
instead of qemu.qemu_process.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bitmap name used for the incremental backup would be leaked
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the function was cleaning up a failed job only but now
there's other stuff that needs to be cleared too.
Make only steps which clean up after a failed job depend on the
'started' field and execute the rest of the code always.
This fixes a leak of the backup job tracking object and the blockdev-add
helper data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code would repeatedly mark the first disk's blockjob as started
rather than accessing all the blockjobs. Fix the dereferencing operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two functions called in sequence both initialized the virStorageSource
backing 'store' leading to a memleak.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup path expects that 'def' is assigned to 'priv->backup', but
that's not the case for early failures. Add a check to stop overwriting
of 'def' so that it can be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows the removal of the
ad-hoc implementation of bitmap merging for block copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removing the ad-hoc
implementation of bitmap merging for block commit. The new approach is
way simpler and more robust and also allows us to get rid of the
disabling of bitmaps done prior to the start as we actually do want to
update the bitmaps in the base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removal of the ad-hoc
implementation of bitmap merging for backup. The new approach is simpler
and also more robust in case some of the bitmaps break as they remove
the dependency on the whole chain of bitmaps working.
The new approach also allows backups if a snapshot is created outside of
libvirt.
Additionally the code is greatly simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a function which allows merging bitmaps according to the new
semantics and will allow replacing all the specific ad-hoc functions
currently in use for 'backup', 'block commit', 'block copy' and will
also be usable in the future for 'block pull' and non-shared storage
migration.
The semantics are a bit quirky for the 'backup' case but these quirks
are documented and will prevent us from having two slightly different
algorithms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've switched to the simple handling, the first thing that can
be massively simplified is checkpoint deletion. We now need to only go
through the backing chain and find the appropriately named bitmaps and
delete them, no complex lookups or merging.
Note that compared to other functions this deletes the bitmap in all
layers compared to others where we expect only exactly 1 bitmap of a
name in the backing chain to prevent potential problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reject duplicates and other problematic bitmaps according to the new
semantics of bitmap use in libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chaining bitmaps for checkpoints (disabling the active one and creating
a new) severely overcomplicated all operations in regards to bitmaps.
Specifically it requires us re-matching the on-disk state to the
internal metadata and in case of merging during block jobs it makes it
almost impossible to cover all corner cases.
Since the checkpoints and incremental backups were not yet enabled,
let's change the design to keep one bitmap per checkpoint. In case of
layered snapshots this will be filled in by using dirty-bitmap-populate.
Finally the main reason for this unnecessary complexity was the fear
that qemu's performance could degrade. In the end I think that
addressing the performance issue will be better done in qemu (e.g by
keeping an internal bitmap updated with changes and merging it
periodically back to the real bitmaps. QEMU writes out changes to disk
at shutdown so consistency is not a problem).
Removing the relationships between bitmaps frees us from complex
handling and also makes all the surrounding code more robust as one
broken bitmap doesn't necessarily invalidate whole chains of backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fetch the checkpoint list for every disk specifically based on the new
per-disk 'incremental' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is not captured by one of the intermediate checkpoints the
code would fail, but we can easily calculate the bitmaps to merge
correctly by skipping over checkpoints which don't describe the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The algorithm is getting quite complex. Split out the lookup of range of
backing chain storage sources and bitmaps contained in them which
correspond to one checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In a few cases we might set seclabels on a path outside of
namespaces. For instance, when restoring a domain from a file,
the file is opened, relabelled and only then the namespace is
created and the FD is passed to QEMU (see v6.3.0-rc1~108 for more
info). Therefore, when restoring the label on the restore file,
we must ignore domain namespaces and restore the label directly
in the host.
This bug demonstrates itself when restoring a domain from a block
device. We don't create the block device inside the domain
namespace and thus the following error is reported at the end of
(otherwise successful) restore:
error : virProcessRunInFork:1236 : internal error: child reported (status=125): unable to stat: /dev/sda: No such file or directory
error : virProcessRunInFork:1240 : unable to stat: /dev/sda: No such file or directory
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The function calls virSecurityManagerDomainRestorePathLabel()
after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The new name is virSecurityManagerDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are two places within qemu driver that misuse
qemuSecuritySetSavedStateLabel() to set seclabels on tempfiles
that are not state files: qemuDomainScreenshot() and
qemuDomainMemoryPeek(). They are doing so because of lack of
qemuSecurityDomainSetPathLabel() at the time of their
introduction.
In all three secdrivers (well, four if you count NOP driver) the
implementation of .domainSetSavedStateLabel and
.domainSetPathLabel callbacks is the same anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Libvirt allows the user to define an incomplete NUMA topology, where
the sum of all CPUs in each cell is less than the total of VCPUs.
What ends up happening is that QEMU allocates the non-enumerated CPUs
in the first NUMA node. This behavior is being flagged as 'to be
deprecated' at least since QEMU commit ec78f8114bc4 ("numa: use
possible_cpus for not mapped CPUs check").
In [1], Maxiwell suggested that we forbid the user to define such
topologies. In his review [2], Peter Krempa pointed out that we can't
break existing guests, and suggested that Libvirt should emulate the
QEMU behavior of putting the remaining vCPUs in the first NUMA node
in these cases.
This patch implements Peter Krempa's suggestion. Since we're going
to most likely end up with disjointed NUMA configuration in node 0
after the auto-fill, we're making auto-fill dependent on QEMU_CAPS_NUMA.
A following patch will update the documentation not just to inform
about the auto-fill mechanic with incomplete NUMA topologies, but also
to discourage the user to create such topologies in the future. This
approach also makes Libvirt independent of whether QEMU changes
its current behavior since we're either auto-filling the CPUs in
node 0 or the user (hopefully) is aware that incomplete topologies,
although supported in Libvirt, are to be avoided.
[1] https://www.redhat.com/archives/libvir-list/2019-June/msg00224.html
[2] https://www.redhat.com/archives/libvir-list/2019-June/msg00263.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No default model should be added to the interface
entry at post parse when its actual network type is hostdev
as doing so might cause a mismatch between the interface
definition and its actual device type.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1845012
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using query-migrate-parameters
QMP command and checking the xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829544
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with downtime-limit parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with max-bandwidth parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829545
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function handles the change of NUMA nodeset for a given
guest, setting CpusetMems for the emulator, vcpus and IOThread
sub-groups. It doesn't set the same nodeset to the root cgroup
though. This means that cpuset.mems of the root cgroup ends up
holding the new nodeset and the old nodeset as well. For
a guest with placement=strict, nodeset='0', doing
virsh numatune <vm> 0 8 --live
Will make cpuset.mems of emulator, vcpus and iothread to be
"8", but cpuset.mems of the root cgroup will be "0,8".
This means that any new tasks that ends up landing in the
root cgroup, aside from the emulator/vcpus/iothread sub-groups,
will be split between the old nodeset and the new nodeset,
which is not what we want.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement secure guest check for AMD SEV (Secure Encrypted
Virtualization) in order to invalidate the qemu capabilities
cache in case the availability of the feature changed.
For AMD SEV the verification consists of:
- checking if /sys/module/kvm_amd/parameters/sev contains the
value '1': meaning SEV is enabled in the host kernel;
- checking if /dev/sev exists
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch introduces a common function to verify if the
availability of the so-called Secure Guest feature on the host
has changed in order to invalidate the qemu capabilities cache.
It can be used as an entry point for verification on different
architectures.
For s390 the verification consists of:
- checking if /sys/firmware/uv is available: meaning the HW
facility is available and the host OS supports it;
- checking if the kernel cmdline contains 'prot_virt=1': meaning
the host OS wants to use the feature.
Whenever the availability of the feature does not match the secure
guest flag in the cache then libvirt will re-build it in order to
pick up the new set of capabilities available.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b50a8354f6 added call to qemuDomainDiskBlockJobIsSupported prior
to filling the 'disk' variable resulting in a crash when attempting a
block commit.
https://gitlab.com/libvirt/libvirt/-/issues/31
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virDomainUpdateDeviceFlags() was used to update an <interface>, and
the interface type changed from type='network' where the network was
an unmanaged bridge (so actualType == bridge) to type='bridge'
(i.e. actualType *also* == bridge), the update would fail due to the
perceived change in type.
In practice it is okay to switch between any interface types that end
up using a tap device, since libvirt just needs to attach the device
to a new bridge. But in this case we were erroneously rejecting it due
to a conditional that was too restrictive. This is what the code was doing:
if (old->type != new->type)
[allow update]
else
if ((oldActual == bridge and newActual == network)
|| (oldActual == network and newActual == bridge)) {
[allow update]
else
[error]
In the case described above though, old->type and new->type don't match,
but oldActual and newActual are both 'bridge', so we get an error.
This patch changes the inner conditional so that any combination of
'network' and 'bridge' for oldActual and newActual, since they both
use a tap device connected to a bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ref count will be private to the GObject base class
and we must not peek at it, even for debugging messages.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To prepare for a conversion to GObject, we need virObjectUnref
to have the same API design as g_object_unref, which means it
needs to be void.
A few places do actually care about the return value though,
and in these cases a thread local flag is used to determine
if the dispose method was invoked.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
