Commit Graph

1980 Commits

Author SHA1 Message Date
Andrea Bolognani
2a7b11eafb schema: List allowed GIC versions
This change allows to use "host" as a GIC version in the domain XML.

Since we'll need to update the virGICVersion enumeration to support
new GIC versions anyway, it makes sense to be a bit more strict in
the schema as well and reject values that are not in the enumeration.
2016-02-16 14:58:58 +01:00
Ján Tomko
d616544077 Spell VMware with a lowercase w
Replace all occurrences of VMWare outside the news.
2016-02-15 15:35:48 +01:00
Cole Robinson
a6cfd22eba docs: fix syntax-check long line error 2016-01-20 10:27:24 -05:00
Daniel P. Berrange
7659bd9221 docs: fix generation of docs from VPATH build
When generating docs in a VPATH build we get a failure to
create a file due to the 'internals' subdir not existing:

  Generating internals/locking.html.tmp
  /bin/sh: line 3: internals/locking.html.tmp: No such file or directory
  rm: cannot remove ‘internals/locking.html.tmp’: No such file or directory
  Makefile:2229: recipe for target 'internals/locking.html.tmp' failed
  make: *** [internals/locking.html.tmp] Error 1

For some reason, make has decided to run the target

  %.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in $(acl_generated)

instead of the target

  internals/%.html.tmp: internals/%.html.in subsite.xsl page.xsl sitemap.html.in

Removing '$(acl_generated)' from the first target, inexplicably
causes make to now run the correct target for the internals/
files.

Rather than figure this out, lets just combine the two targets
into one.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-01-20 12:22:19 +00:00
John Ferlan
4f84617078 conf: Add storage pool device attribute part_separator
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.

This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
2016-01-19 13:02:59 -05:00
Andrea Bolognani
08a883c71f NEWS: Don't prefix version numbers with 'v'
It was only used in two instances, so get rid of it for
consistency's sake.
2016-01-18 10:53:22 +01:00
Andrea Bolognani
5987d22846 NEWS: Fix whitespace issues 2016-01-18 10:53:17 +01:00
Andrea Bolognani
c716e9674b NEWS: Move 2015 entries to a separate file
Now that the first release made in 2016 is out, we can move all
entries for 2015 to their own file, just like we did for all previous
years.
2016-01-18 10:52:22 +01:00
Daniel Veillard
8fd68675e2 Release of libvirt-1.3.1
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: regenerated
2016-01-17 10:29:57 +08:00
Michal Privoznik
8c67ab6684 Expand $(wildcard) correctly
So after da176bf6b7 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-12 17:16:33 +01:00
Dmitry Andreev
7bf3198df6 conf: introduce 'autodeflate' attribute for memballoon device
Excessive memory balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. QEMU memballoon device
has a feature to release some memory at the last moment before some
process will be get killed by OOM-killer.

Introduce a new optional balloon device attribute 'autodeflate' to
enable or disable this feature.
2016-01-12 10:48:21 -05:00
Cole Robinson
f7d0f12407 build: Kill docs/schemas/Makefile.am
Move the logic to docs/Makefile.am, and simplify it with a wildcard
expression.
2016-01-11 11:45:14 -05:00
Wido den Hollander
6343018fac rbd: Do not append Ceph monitor port number 6789 if not provided
If no port number was provided for a storage pool libvirt defaults to
port 6789; however, librbd/librados already default to 6789 when no port
number is provided.

In the future Ceph will switch to a new port for the Ceph monitors since
port 6789 is already assigned to a different application by IANA.

Port 6789 is assigned to SMC-HTTPS and Ceph now has port 3300 assigned as
the 'Ceph monitor' port.

In this case it is the best solution to not hardcode any port number into
libvirt and let librados handle the connection.

Only if a user specifies a different port number we pass it down to librados,
otherwise we leave it blank.

Signed-off-by: Wido den Hollander <wido@widodh.nl>

merge
2016-01-06 08:13:50 -05:00
Dmitry Mishin
8cbd91a449 docs: Describe new 'append' attribute for chardevs source
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
2016-01-05 07:59:17 -05:00
Ján Tomko
b4e0549feb schema: interleave domain name and uuid with other elements
Allow <name> and <uuid> anywhere under <domain>, not just at the top:

error:XML document failed to validate against schema: Unable to validate
doc against /usr/share/libvirt/schemas/domain.rng
Expecting an element name, got nothing
Invalid sequence in interleave
Element domain failed to validate content

Introduced with the first RelaxNG schema in commit c642103.

https://bugzilla.redhat.com/show_bug.cgi?id=1292131
2016-01-05 13:21:09 +01:00
Laine Stump
79e7872530 docs: update to properly reflect meaning of fields in log filter
The documentation (and comment in libvirtd.conf) says that the text in
a log filter is compared to the "source file name", and gives the
example of "util/json", but this is not correct (at least not since
commit 2835c1e, possibly earlier). It is instead compared to the
string given in the VIR_LOG_INIT() macro invocation at the top of each
source file, which is always "similar to but not the same as" the
source file name (in the example above, the proper name is
"util.json", while the file name is "util/virjson.c"). This patch
corrects the misstatement in both the documentation and in
libvirtd.conf.
2016-01-04 15:19:38 -05:00
Dmitry Mishin
70ffa02fc2 conf: Add new 'append' attribute for chardevs with file source
Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.

Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
2015-12-24 14:50:31 +00:00
Daniel Veillard
11288f56ee Release of libvirt-1.3.0
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: regenerated
2015-12-09 17:13:48 +08:00
Peter Krempa
e5fac00946 schema: Allow > UINT_MAX KiB of memory for NUMA nodes
Using more than 4TiB of memory per NUMA node would not be possible to
express in the XML without violating the schema. Not that such boxes
would be common, but we should use a longer type at this point.

The pattern is not necessary since libvirt redefines the type already in
basictypes.rng with the same pattern.
2015-12-04 15:21:20 +01:00
Ján Tomko
1a538a07c7 conf: add XML for input device passthrough
Add xml for the new virtio-input-host-pci device:
<input type='passthrough' bus='virtio'>
  <source evdev='/dev/input/event1234'/>
</input>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:29:03 +01:00
Ján Tomko
bebdfafb2b conf: parse and format virtio input bus in domain XML
To be used by the family of virtio input devices:

<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:22:06 +01:00
Erik Skultety
a20b623748 libvirt: introduce libvirt/libvirt-common.h.in
As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.
2015-11-30 09:36:19 +01:00
Marc-André Lureau
21373feb4e qemu: add virtio video device
qemu 2.5 provides virtio video device.  It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-11-27 16:48:53 +01:00
Ján Tomko
7ec235ed09 schema: use a better regex for listen addresses
A domain with '::' as the listen address fails to validate.

Reuse the 'ipAddr' and 'dnsName' regexes from basictypes instead
of reinventing them.

https://bugzilla.redhat.com/show_bug.cgi?id=1285665
2015-11-26 11:05:18 +01:00
Dmitry Andreev
59fc0d0609 Allow multiple panic devices
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
2015-11-25 14:46:21 +01:00
Dmitry Andreev
658ec27fe8 conf: add 'model' attribute for panic device with values isa, pseries, hyperv
Libvirt already has two types of panic devices - pvpanic and pSeries firmware.
This patch introduces the 'model' attribute and a new type of panic device.

'isa' model is for ISA pvpanic device.
'pseries' model is a default value for pSeries guests.
'hyperv' model is the new type. It's used for Hyper-V crash.

Schema and docs are updated for the new attribute.
2015-11-25 12:19:55 +01:00
Laine Stump
0d210c47f9 conf: support reporting maxCount attribute for virtual_functions cap
Report the maximum possible number of VFs for an SRIOV PF, like this:

   <capability type='virtual_functions' maxCount='7'>
      ...
   </capability>

I've just discovered that the virtual_functions and physical_functions
capabilities are not supported in the virNodeDeviceParse functions,
only in virNodeDeviceFormat (I suppose because they are only reported,
not set from XML). This should probably be remedied, but is less
immediately useful than the current patch.
2015-11-24 12:29:31 -05:00
Peter Krempa
83707dc87e conf: Prepare making memory device target node optional
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
2015-11-18 10:32:18 +01:00
Daniel P. Berrange
257e2056e7 qemu: really remove last traces of Xenner support
We have twice previously attempted to remove Xenner
support

  commit de9be0ab4d
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Aug 22 17:29:01 2012 +0100

    Remove xenner support

  commit 92572c3d71
  Author: Ján Tomko <jtomko@redhat.com>
  Date:   Wed Feb 18 16:33:50 2015 +0100

    Remove code handling the QEMU_CAPS_DOMID capability

This change really does remove the last traces of it
in the capabilities handling code

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:15 +00:00
Daniel P. Berrange
fc604c12d5 qemu: mandate QEMU version 0.12.0 or newer
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:00 +00:00
Daniel Veillard
b091fef5cf Release of libvirt-1.2.21
* docs/news.html.in libvirt.spec.in: Updated for the release
* po/*.po*: regenerated
2015-11-04 10:59:12 +08:00
Andrea Bolognani
1b4de77e85 NEWS: Fix XSLT stylesheet
This has been broken for a looong time - in fact, we've been
shipping a mostly-empty NEWS file for at least the past two years.

Including the html namespace and using it for matching elements,
like hacking1.xsl and hacking2.xsl were already doing, makes the
NEWS file useful again.

Add a note explaining that the release list has been split up
by year as well.
2015-10-20 17:30:34 +02:00
Andrea Bolognani
ba4689e081 NEWS: Split releases by year
Update cfg.mk to ignore the split files during
syntax-check (thanks Martin).
2015-10-20 17:29:03 +02:00
Andrea Bolognani
0331da65ed NEWS: Unify date format
There were some inconsistencies, eg. the number of digits used for
the day. The month name was also spelled out instead of abbreviated
in some instances.
2015-10-14 18:18:03 +02:00
Andrea Bolognani
f84fc5a557 NEWS: Unify section titles
There were some inconsistencies; now the section title is always
one of Bug Fixes, Cleanups, Documentation, Features, Improvements,
Portability, Security.
2015-10-14 18:17:33 +02:00
Andrea Bolognani
149cd07446 NEWS: Add empty lines
Make sure there is always an empty line between sections.
2015-10-14 18:17:15 +02:00
Andrea Bolognani
ccc969762f NEWS: Fix indentation
Some of the paragraphs were not properly indented: while this was
not a problem in the HTML version, you could tell the difference
in the plain text version.
2015-10-14 18:16:19 +02:00
Andrea Bolognani
a7a0eb531d NEWS: Fix newlines
Some <br/> tags were missing from the end of the corresponding
line, some of there were in the middle of the line instead.
2015-10-14 18:12:04 +02:00
Andrea Bolognani
7b45172a06 NEWS: Fix whitespace
Mostly missing space between change description and author name or
spurious space before section title.

Reflow the introductory paragraph as well.
2015-10-14 18:11:02 +02:00
Andrea Bolognani
348bb33701 NEWS: Organize old entries
Sort all items into the standard categories: Features, Bug Fixes,
Improvements, Cleanups, etc.

The sorting is somewhat arbitrary in certain instances.
2015-10-14 18:04:21 +02:00
Andrea Bolognani
bb91111ce2 NEWS: Split old entries (2009)
The changes for releases earlier than 0.7.1 were mostly lumped
together as opposed to being tidly organized with one change per
line, like we have done from that point onwards.

As a result, they look awful in the HTML version and don't work
too well in the plain text version either.

Luckily, except for the very first releases, the information is
still very detailed, so it's enough to organize it properly.
2015-10-14 17:50:59 +02:00
Andrea Bolognani
36c4066590 NEWS: Split old entries (2008)
The changes for releases earlier than 0.7.1 were mostly lumped
together as opposed to being tidly organized with one change per
line, like we have done from that point onwards.

As a result, they look awful in the HTML version and don't work
too well in the plain text version either.

Luckily, except for the very first releases, the information is
still very detailed, so it's enough to organize it properly.
2015-10-14 17:49:26 +02:00
Andrea Bolognani
b8515b4e3a NEWS: Split old entries (2006-2007)
The changes for releases earlier than 0.7.1 were mostly lumped
together as opposed to being tidly organized with one change per
line, like we have done from that point onwards.

As a result, they look awful in the HTML version and don't work
too well in the plain text version either.

Luckily, except for the very first releases, the information is
still very detailed, so it's enough to organize it properly.
2015-10-14 17:48:57 +02:00
Andrea Bolognani
5ab0598479 NEWS: Properly escape > in HTML 2015-10-14 17:44:16 +02:00
Andrea Bolognani
33a6a8a95e NEWS: Split off merged sections
Portability and Bug Fixes for release 0.7.3 were merged together;
same for Features and Security for release 1.1.3. Split them off
2015-10-14 17:43:54 +02:00
Andrea Bolognani
4155e5300e NEWS: Remove empty sections 2015-10-14 17:43:46 +02:00
Andrea Bolognani
be153a721b NEWS: Include description for release 0.7.3
The description for this release, unlike all other descriptions,
was inside a <p> element; however, the XSLT stylesheet contains a
template that drops all <p> elements from the output file, so it
never made it to the generated NEWS file.

Use a <li> element, same as all other releases, instead.
2015-10-14 17:43:20 +02:00
Cole Robinson
bdcc2f80a6 docs: domain: Show canonical pvspinlock XML
The example pvspinlock XML is:

  <pvspinlock/>

While this is accepted by libvirt and works correctly, it's currently
always output as a tristate like

  <pvspinlock state='on'/>

So document that format instead
2015-10-06 10:26:59 -04:00
Martin Kletzander
37e85cff06 docs: Add Cuckoo Sandbox into apps.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-10-02 16:14:26 +02:00
Daniel Veillard
439760214c Release of libvirt-1.2.20
* docs/news.html.in libvirt.spec.in: update for new release
* po/*.po*: regenerate localization
2015-10-02 13:17:16 +02:00