It was used just temporarily to do a calculation, no need to keep that around.
Also use virBitmap in the code instead of reimplementing two of its existing
functions. And move the counting part next to where the value is read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will be used in that file later on, plus it makes sense for all the
implementations to be in same place. Also comment each one of them nicely and
add a comment explaining why they all need to end with the same _LAST value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to have virResctrlGetInfo() when it must be called after
virResctrlInfoNew() anyway, otherwise it's just an unusable object. When we
wrap the logic inside the New() function we'll save some calls later as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move description of the purpose of the file before any definition.
One empty line between related enum definitions.
All typedefs before all structs. This is exception from the usual, but not the
only one, we already have something similar for some other structs. This way we
can move contents between structs and reorder some parts nicely without moving
all definitions of one type before another one just so it's defined.
Define all classes in one place.
Have one initialization function for all classes in the file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That way we get rid of the last preprocessor conditional so the code compiles on
all platforms.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have virFileLock(), but we are now using flock() in the code as
well (due to requirements for mutual exclusion between libvirt and other
programs using flock() as well), so let's have a function for that as well so we
don't need to have stubs for unsupported platforms in other files.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529059
Commit id 0fe4aa14 added the thread specific error message
reporting (or save) to virFDStreamEvent; however, as processing
goes via virStream{Send|SendHole|Recv} via calls from
daemonStreamHandle{WriteData|Hole|Read} the last error
gets reset in the main libvirt API's thus, whatever error
may have been set as last error will be cleared prior to
the error paths using it resulting in the generic error
on the client side.
For each of the paths that check threadQuit or threadErr,
check if threadErr was set and set it agian if there isn't
a last error (e.g. some other failure) set so that the
message can be provided back to the client.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The dirent's d_type field is not portable to all platforms. So we have
to use stat() to determine the type of file for the functions that need
to be cross-platform. Fix virFileChownFiles() by calling the new
virFileIsRegular() function.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Implement virFileChownFiles() which changes file ownership of all
files in a given directory.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Many places in the code call virGetLastError() just to check the
raised error code, or domain. However virGetLastError() can return
NULL, so the code has to check for that first. This patch therefore
introduces virGetLasError{Code,Domain} functions which always return a
valid error code or domain respectively, thus dropping the need to
perform any checks on the error object.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virCryptoGenerateRandom() is plain wrapper over
virRandomBytes() we can drop it in favour of the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If virRandomBytes() fails there is no point calling
virRandomBits() because it uses virRandomBytes() internally
again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have strong PRNG generator implemented in
virRandomBytes() let's use that instead of gnulib's random_r.
Problem with the latter is in way we seed it: current UNIX time
and libvirtd's PID are not that random as one might think.
Imagine two hosts booting at the same time. There's a fair chance
that those hosts spawn libvirtds at the same time and with the
same PID. This will result in both daemons generating the same
sequence of say MAC addresses [1].
1: https://www.redhat.com/archives/libvirt-users/2018-May/msg00097.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While /dev/urandom is not terrible source of random data
gnutls_rnd is better. Prefer that one.
Also, since nearly every platform we build on already has gnutls
(if not all of them) this is going to be used by default.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having each caller report error move it into the
function. This way we can produce more accurate error messages
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To unify our vir*Random() functions we need to make
virCryptoGenerateRandom NOT allocate return buffer. It should
just fill given buffer with random data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When generating random stream using gnults fails an error is
reported. However, the error is not helpful as it contains only
an integer error code (a negative number). Use gnutls_strerror()
to turn the error code into a string explaining what went wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function allocates a buffer, fills it in with random bytes
and then returns it. However, the buffer is held in @buf
variable, therefore having @ret variable which does not hold
return value of the function is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In libvirt when a function wants to return an error code it
should be a negative value. Returning a positive value (or zero)
means success. But virRandomBytes() does not follow this rule.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The variable forkRet is not used after commit 25f8781
Signed-off-by: Radostin Stoyanov <rstoyanov1@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
With blockdev support we will need to introspect whether any of the
backing chain members requires PR rather just one of them. Add a helper
and reuse it in virDomainDefHasManagedPR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Disks are client-only so we don't need to have this variable. We also
always pass false for 'isListen' to qemuBuildTLSx509BackendProps for all
disk-related code-paths so the 'tlsVerify' is ignored anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/virQEMUBuildObjectCommandlineFromJSON/virQEMUBuildObjectCommandlineFromJSONType/
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A file for vsock-related helper functions.
virVsockSetGuestCid to set an already-known CID,
virVsockAcquireGuestCid that will use the first available CID
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically we matched log filters with strstr(), and when switching to
fnmatch in cbb0fd3cfd, it was stated that
we would continue to match substrings, with "foo" being equivalent to
"*foo*". Unfortuntely I forget to provide the code to actually make that
happen. This fixes it to prepend and append "*". We don't bother to
check if the pattern already has a leading/trailing '*', because
"**foo**" will match the same as "*foo*".
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virCryptoHashString also needs to know the size of the returned hash.
Return it if the hash conversion succeeded so the caller does not need
to access the hashinfo array.
This should make virCryptoHashString build without gnutls.
Also fixes the missing return value for the virCryptoHashBuf stub.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
To allow storing status information in the XML move the validation that
the 'path' is not valid for managed PR daemon case into
qemuDomainValidateStorageSource and allow parsing of the data even in
case when managed='yes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It only accepts a virObjecLockable, not a virObjecRWLockable
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add the function virHostdevIsMdevDevice() which detects whether a
hostdev is a mediated device or not. Also, replace all existing
conditionals.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Ditch the use of gnulib's digest functions in favor of GnuTLS,
which might be more likely to get FIPS-certified.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A function that keeps the hash in binary form instead of converting
it to human-readable hexadecimal form.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The callers needing to know the size of the resulting digest
rely on _DIGEST_SIZE constants from gnulib.
Introduce VIR_CRYPTO_HASH_SIZE_ constants to remove the dependency.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rather than specialcasing handling of the '*' character, use fnmatch()
to get normal shell wildcard syntax, as described in 'man glob(7)'.
To get an indication of the performance impact of using globs instead
of plain string matches, a test program was written. The list of all
260 log categories was extracted from the source. Then a typical log
filters setup was picked by creating an array of the strings "qemu",
"security", "util", "cgroup", "event", "object". Every filter string
was matched against every log category. Timing information showed that
using strstr() this took 8 microseconds, while fnmatch() took 114
microseconds.
IOW, fnmatch is 14 times slower than our existing strstr check. These
numbers show a worst case scenario that will never be hit, because it
is rare that every log category would have data output. The log category
matches are cached, so each category is only checked once no matter how
many log statements are emitted. IOW despite being slower, this will
be lost in the noise and have no consequence on real world logging
performance.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's this macro virBufferSetChildIndent which sets offset of
child buffer from given parent buffer. However, it is calling
virBufferAdjustIndent() which only adds adjustment instead of
calling virBufferSetIndent() which clears out any adjustment
previously set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like in previous commit, qemu-pr-helper might want to open
/dev/mapper/control under certain circumstances. Therefore we
have to allow it in cgroups.
The change virdevmapper.c might look spurious but it isn't. After
6dd84f6850 any path that we're allowing in deivces CGroup is
subject to virDevMapperGetTargets() inspection. And libdevmapper
returns ENXIO for the path from subject.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Couple of reasons for that:
a) there's no monitor command to change path where the pr-helper
connects to, or
b) there's no monitor command to introduce a new pr-helper for a
disk that already exists.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.
We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add detection mechanism which will allow to check whether a path to a
block device is a physical CDROM drive. This will be useful once we will
need to pass it to hypervisors.
The linux implementation uses an ioctl to do the detection, while the
fallback uses a simple string prefix match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Few things which are currently stored the virDomainDiskDef structure are
actually relevant for the storage source as well. Add the fields with a
note that they are just mirror of the values from the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We want to make sure our wrapper is used instead in order
to keep the test suite working.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latter is impossible to mock on platforms that use the
gnulib implementation, such as FreeBSD, while the former
doesn't suffer from this limitation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's a trivial wrapper around canonicalize_file_name(),
which we need in order to fully mock file access on non-Linux
platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileLoadBackendModule method is only used if either
fs or gluster storage is built in, which doesn't happen on mingw
leading to warning of an unused static function.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The storage file drivers are currently loaded as a side effect of
loading the storage driver. This is a bogus dependancy because the
storage file code has no interaction with the storage drivers, and
even ultimately be running in a completely separate daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileSupportsSecurityDriver and
virStorageFileSupportsAccess currently just return a boolean
value. This is ok because they don't have any failure scenarios
but a subsequent patch is going to introduce potential failure
scenario. This changes their return type from a boolean to an
int with values -1, 0, 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileGetBackingStoreStr method has overloaded the NULL
return value to indicate both no backing available and a fatal
error dealing with it.
The caller is thus not able to correctly propagate the error
messages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver.{c,h} files are primarily targetted at loading hypervisor
drivers and some helper functions in that area. It also, however,
contains a generically useful function for loading extension modules
that is called by the storage driver. Split that functionality off
into a new virmodule.{c,h} file to isolate it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 8daa593b07.
There are two undesirable aspects to the impl
- Only a bare wildcard is permitted
- The wildcard match is not performed in the order listed
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virNetDevTapGetRealDeviceName() is used on FreeBSD because interface
names (such as one sees in output of tools like ifconfig(8)) might not
match their /dev entity names, and for bhyve we need the latter.
Current implementation is not very efficient because in order to find
/dev name, it goes through all /dev/tap* entries and tries to issue
TAPGIFNAME ioctl on it. Not only this is slow, but also there's a bug in
this implementation when more than one NIC is passed to a VM: once we
find the tap interface we're looking for, we set its state to UP because
opening it for issuing ioctl sets it DOWN, even if it was UP before.
When we have more than 1 NIC for a VM, we have only last one UP because
others remain DOWN after unsuccessful attempts to match interface name.
New implementation just uses sysctl(3), so it should be faster and
won't make interfaces go down to get name.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virFileFindResource method merely builds up the expected fully
qualified path to the resource. It does not actually check if it exists
on disk. The loadable module callers were mistakenly thinking a NULL
indicates the file doesn't exist on disk, whereas it in fact indicates
an out of memory error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1569678
On some large systems (with ~400GB of RAM) it is possible for
unsigned int to overflow in which case we report invalid number
of 4K pages pool size. Switch to unsigned long long.
We hit overflow in virNumaGetPages when doing:
huge_page_sum += 1024 * page_size * page_avail;
because although 'huge_page_sum' is an unsigned long long, the
page_size and page_avail are both unsigned int, so the promotion
to unsigned long long doesn't happen until the sum has been
calculated, by which time we've already overflowed.
Turning page_avail into a unsigned long long is not strictly
needed until we need ability to represent more than 2^32
4k pages, which equates to 16 TB of RAM. That's not
outside the realm of possibility, so makes sense that we
change it to unsigned long long to avoid future problems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it is not used in backing chains and does not seem that we
will need to use it so return it back to the disk definition. Thankfully
most accesses are done via the accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Our virObject code relies heavily on the fact that the first
member of the class struct is type of virObject (or some
derivation of if). Let's check for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.
The unified name is 'parent'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is the responsability of the caller to apply the correct lock
before using these functions. Moreover, the use of a simple boolean
was still racy: two threads may check the boolean and "lock" it
simultaneously.
Users of functions from src/util/virhash.c have to be checked for
correctness. Lookups and iteration should hold a RO
lock. Modifications should hold a RW lock.
Most important uses seem to be covered. Callers have now a greater
responsability, notably the ability to execute some operations while
iterating were reliably forbidden before are now accepted.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Since virCloseCallbacksRun was ignoring the value anyway, let's
just change it to be a void function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Since the introduction of log tuning capabilities to virt-admin by
@06b91785, this has been a much needed missing improvement on the way to
deprecate the global 'log_level'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When preparing for migration, the libxl driver creates a new TCP listen
socket for the incoming migration by calling virNetSocketNewListenTCP,
passing the destination host name. virNetSocketNewListenTCP calls
virSocketAddrParse to check if the host name is a wildcard address, in
which case it avoids adding the AI_ADDRCONFIG flag to the hints passed to
getaddrinfo. If the host name is not an IP address, virSocketAddrParse
reports an error
error : virSocketAddrParseInternal:121 : Cannot parse socket address
'myhost.example.com': Name or service not known
But virNetSocketNewListenTCP succeeds regardless and the overall migration
operation succeeds.
Introduce virSocketAddrParseAny and use it when simply testing if a host
name/addr is parsable.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This helper fetches dependencies for given device mapper target.
At the same time, we need to provide a dummy log function because
by default libdevmapper prints out error messages to stderr which
we need to suppress.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes it's desired to get a JSON number as string. Add a helper.
This will help in cases where we'd want to convert the internal type from
string to something else.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.
Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.
Fix all callers to pass a double pointer too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The set of arguments was changed a long time ago (040d996342
which dates back to July 2013) but the corresponding
documentation was not updated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The flags passed to virCommandPassFD() are unnamed and
documentation to this function doesn't list them either.
Give them name and mention it in documentation to functions
using them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
What one currently gets is:
failed to read '/sys/bus/mdev/devices/<UUID>/mdev_type/device_api': No
such file or directory
This indicates that something is missing within the device's sysfs tree
which likely might be not be the case here because the device simply
doesn't exist yet. So, when creating our internal mdev obj, let's check
whether the device exists first prior to trying to verify the
user-provided model within domain XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
==16451== 32,768 bytes in 2 blocks are definitely lost in loss record 1,007 of 1,013
==16451== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==16451== by 0x7CADB40: nl_recv (in /usr/lib64/libnl-3.so.200.23.0)
==16451== by 0x532DFAC: virNetlinkDumpCommand (virnetlink.c:363)
==16451== by 0x53236AE: virNetDevIPCheckIPv6Forwarding (virnetdevip.c:641)
==16451== by 0xE3E4A1A: networkStartNetworkVirtual (bridge_driver.c:2490)
==16451== by 0xE3E55F5: networkStartNetwork (bridge_driver.c:2832)
==16451== by 0xE3DFFE5: networkAutostartConfig (bridge_driver.c:531)
==16451== by 0x53F47E0: virNetworkObjListForEachHelper (virnetworkobj.c:1412)
==16451== by 0x52FE69F: virHashForEach (virhash.c:606)
==16451== by 0x53F4857: virNetworkObjListForEach (virnetworkobj.c:1439)
==16451== by 0xE3E0BF4: networkStateAutoStart (bridge_driver.c:808)
==16451== by 0x55689CE: virStateInitialize (libvirt.c:758)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have to use VIR_WARNINGS_NO_CAST_ALIGN to avoid clang warning
about increased required alignment caused by some netlink macros.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
And at the same time, do that from .c rather than .h file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Chen Hanxiao<chenhanxiao@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
introduce helper to parse RTM_GETNEIGH query message and
store it in struct virArpTable.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some fields reported by dmidecode have plenty of useless spaces
(in fact some have nothing but spaces). To deal with this we have
introduced virSkipSpacesBackwards() and use it in
virSysinfoParseX86Processor() and virSysinfoParseX86Memory().
However, other functions (e.g. virSysinfoParseX86Chassis()) don't
use it at all and thus we are reporting nonsense:
<sysinfo type='smbios'>
<chassis>
<entry name='manufacturer'>FUJITSU</entry>
<entry name='version'> </entry>
<entry name='serial'> </entry>
<entry name='asset'> </entry>
<entry name='sku'>Default string</entry>
</chassis>
</sysinfo>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Policy-Kit has been replaced by polkit (referred to, respectively,
as POLKIT0 and POLKIT1 in our Makefiles).
The last build fix with old Policy-Kit was in May 2013:
commit <442eb2ba> and build with -Wunused-label was broken
since April 2016: commit <8437130>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Probably due to copy-paste error we're storing asset tag into
def->sku which we even use in the next step to store SKU number
and thus the asset tag leaks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function used the 'cleanup' label only in error cases. This patch
makes the code pass the cleanup label in every case and removes few
unnecessary VIR_FREEs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When commit 3545cbef moved the sysfs attribute reading logic from
_udev.c module to virmdev.c, it had to replace our udev read wrappers
with the ones available from virfile.c. The problem is that the original
logic worked correctly with udev read wrappers which don't return an
error code for a missing attribute, virfile.c readers however - not so
much. Therefore add another parameter to the macro, so we can again
accept the fact that optional attributes may be missing.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This flag is only used for tests. Let's instead overload bind syscall
in mocks where it is not done yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Range check in virPortAllocatorSetUsed is not useful anymore
when we manage ports for entire unsigned short range values.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Range check in virPortAllocatorSetUsed is not useful anymore
when we manage ports for entire unsigned short range values.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Host tcp4/tcp6 ports is a global resource thus we need to make
port accounting also global or we have issues described in [1] when
port allocator ranges of different instances are overlapped (which
is by default for qemu for example).
Let's have only one global port allocator object that take care
of the entire ports range (0 - 65535) and introduce port range object
for clients to specify desired auto allocation band.
[1] https://www.redhat.com/archives/libvir-list/2017-December/msg00600.html
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Ensure all enum cases are listed in switch statements.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To ensure we have standardized error messages when reporting problems
with enum values being out of a range, add virReportEnumRangeError().
virReportEnumRangeError(virDomainState, 34);
results in a message
"internal error: Unexpected enum value 34 for virDomainState"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function returns nothing but zero. Therefore it makes no
sense to have it returning an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7e62c4cd26 (first appearing in libvirt-3.9.0 as a resolution
to rhbz #1343919) added a "generated" attribute to virMacAddr that was
set whenever a mac address was auto-generated by libvirt. This
knowledge was used in a single place - when trying to match a NetDef
from the Domain to Delete with user-provided XML. Since the XML parser
always auto-generates a MAC address for NetDefs when none is provided,
it was previously impossible to make a search where the MAC address
isn't significant, but the addition of the "generated" attribute made
it possible for the search function to ignore auto-generated MACs.
This implementation had a problem though - it was adding a field to a
"low level" struct - virMacAddr - which is used in other places with
the assumption that it contains exactly a 6 byte MAC address and
nothing else. In particular, virNWFilterSnoopEthHdr uses virMacAddr as
part of the definition of an ethernet packet header, whose layout must
of course match an actual ethernet packet. Adding the extra bools into
virNWFilterSnoopEthHdr caused the nwfilter driver's "IP discovery via
DHCP packet snooping" functionality to mysteriously stop working.
In order to fix that behavior, and prevent potential future similar
odd behavior, this patch moves the "generated" member out of
virMacAddr (so that it is again really is just a MAC address) into
virDomainNetDef, and sets it only when virDomainNetGenerateMAC() is
called from virDomainNetDefParseXML() (which is the only time we care
about it).
Resolves: https://bugzilla.redhat.com/1529338
(It should also be applied to any maintenance branch that applies
commit 7e62c4cd26 and friends to resolve
https://bugzilla.redhat.com/1343919)
Signed-off-by: Laine Stump <laine@laine.org>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We can't really detect all the authentication data in a sane manner for
disk backing chains. Since the old RBD parser parses it in some cases as
the argv->XML convertor requires it, we can't just drop it.
Instead clear any detected authentication data in the code paths related
to disk backing chain lookup and fix the tests to cope with the change.
https://bugzilla.redhat.com/show_bug.cgi?id=1544659
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The documentation for the JSON/qapi type 'UnixSocketAddress' states that
the unix socket path field is named 'path'. Unfortunately qemu uses
'socket' in case of the gluster driver (despite documented otherwise).
Add logic which will format the correct fields while keeping support of
the old spelling.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544325
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The fix for CVE-2018-6764 introduced a potential deadlock scenario
that gets triggered by the NSS module when virGetHostname() calls
getaddrinfo to resolve the hostname:
#0 0x00007f6e714b57e7 in futex_wait
#1 futex_wait_simple
#2 __pthread_once_slow
#3 0x00007f6e71d16e7d in virOnce
#4 0x00007f6e71d0997c in virLogInitialize
#5 0x00007f6e71d0a09a in virLogVMessage
#6 0x00007f6e71d09ffd in virLogMessage
#7 0x00007f6e71d0db22 in virObjectNew
#8 0x00007f6e71d0dbf1 in virObjectLockableNew
#9 0x00007f6e71d0d3e5 in virMacMapNew
#10 0x00007f6e71cdc50a in findLease
#11 0x00007f6e71cdcc56 in _nss_libvirt_gethostbyname4_r
#12 0x00007f6e724631fc in gaih_inet
#13 0x00007f6e72464697 in __GI_getaddrinfo
#14 0x00007f6e71d19e81 in virGetHostnameImpl
#15 0x00007f6e71d1a057 in virGetHostnameQuiet
#16 0x00007f6e71d09936 in virLogOnceInit
#17 0x00007f6e71d09952 in virLogOnce
#18 0x00007f6e714b5829 in __pthread_once_slow
#19 0x00007f6e71d16e7d in virOnce
#20 0x00007f6e71d0997c in virLogInitialize
#21 0x00007f6e71d0a09a in virLogVMessage
#22 0x00007f6e71d09ffd in virLogMessage
#23 0x00007f6e71d0db22 in virObjectNew
#24 0x00007f6e71d0dbf1 in virObjectLockableNew
#25 0x00007f6e71d0d3e5 in virMacMapNew
#26 0x00007f6e71cdc50a in findLease
#27 0x00007f6e71cdc839 in _nss_libvirt_gethostbyname3_r
#28 0x00007f6e71cdc724 in _nss_libvirt_gethostbyname2_r
#29 0x00007f6e7248f72f in __gethostbyname2_r
#30 0x00007f6e7248f494 in gethostbyname2
#31 0x000056348c30c36d in hosts_keys
#32 0x000056348c30b7d2 in main
Fortunately the extra stuff virGetHostname does is totally irrelevant to
the needs of the logging code, so we can just inline a call to the
native hostname() syscall directly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some of function comments don't have the right named parameters
and others are not consistent with the description alignment.
This patch fixes this.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At later point it might not be possible or even safe to use getaddrinfo(). It
can in turn result in a load of NSS module.
Notably, on a LXC container startup we may find ourselves with the guest
filesystem already having replaced the host one. Loading a NSS module
from the guest tree would allow a malicous guest to escape the
confinement of its container environment because libvirt will not yet
have locked it down.
Note the fact that the unused portion of the last element in the bitmap
needs to be cleared, since we use functions which process only full-size
elements and don't really deal with individual bits.
The function only reduces the size of the bitmap thus we can use the
appropriate shrinking function which also does not have any return
value.
Since virBitmapShrink now does not return any value callers need to be
fixed as well.
The virBitmap code uses VIR_RESIZE_N to do quadratic scaling, which
means that along with the number of requested map elements we also need
to keep the number of actually allocated elements for the scaling
algorithm to work properly.
The shrinking code did not fix 'map_alloc' thus virResizeN might
actually not expand the bitmap properly after called on a previously
shrunk bitmap.
