The path is formatted but then just freed without any use since
introduction of the test function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
Debian sid is currently broken on mipsel, so use Debian 10 for
that architecture; at the same time, move the ppc64le build from
Debian 10 to Debian sid to keep things balanced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The ci-* targets need to know where our container images are stored
and how they are called to work, so now that we use the GitLab
container registry instead of Quay some changes are necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using pre-built containers hosted on Quay, build
containers as part of the GitLab CI pipeline and upload them to the
GitLab container registry for later use.
This will not significantly slow down builds, because containers are
only rebuilt when the corresponding Dockerfile has been modified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a lot of repetition and makes the configuration much
easier to read.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This needs to be set for every repository for Cirrus CI integration
to work.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Right now we're dividing the jobs into three stages: prebuild, which
includes DCO checking as well as building artifacts such as the
website, and native_build/cross_build, which do exactly what you'd
expect based on their names.
This organization is nice from the logical point of view, but results
in poor utilization of the available CI resources: in particular, the
fact that cross_build jobs can only start after all native_build jobs
have finished means that if even a single one of the latter takes a
bit longer the pipeline will stall, and with native builds taking
anywhere from less than 10 minutes to more than 20, this happens all
the time.
Building artifacts in a separate pipeline stage also doesn't have any
advantages, and only delays further stages by a couple of minutes.
The only job that really makes sense in its own stage is the DCO
check, because it's extremely fast (less than 1 minute) and, if that
fails, we can avoid kicking off all other jobs.
Reducing the number of stages results in significant speedups:
specifically, going from three stages to two stages reduces the
overall completion time for a full CI pipeline from ~45 minutes[1]
to ~30 minutes[2].
[1] https://gitlab.com/abologna/libvirt/-/pipelines/154751893
[2] https://gitlab.com/abologna/libvirt/-/pipelines/154771173
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For the case where -fw_cfg uses a file, we need to set the
seclabels on it to allow QEMU the access. While QEMU allows
writing into the file (if specified on the command line), so far
we are enabling reading only and thus we can use read only label
(in case of SELinux).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.
The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no real need to have two separate functions. They can be
merged together which not only saves couple of lines, but
prepares the structure of the code for future expansion. See next
commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some variables defined in the function can be freed
automatically when going out of scope. This renders @result
variable and cleanup label needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to decode DMI table, just before constructing
virCommand() the decoder is looked for in PATH using
virFindFileInPath(). Well, this is not necessary because
virCommandRun() will do this too (in virExec()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Virtually every variable defined in the function can be freed
automatically when going out of scope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we now use Cirrus CI for macOS jobs, we no longer need to
keep Travis CI around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We use cirrus-run to trigger Cirrus CI jobs from GitLab CI jobs,
making it possible to extend our platform coverage to include
FreeBSD without having to maintain our own runners; additionally,
we'll be able to ditch Travis CI and, since results for Cirrus CI
jobs are reflected back to the GitLab CI jobs that triggered them,
we will be able to get all information from a single dashboard.
The FreeBSD and macOS job definitions can be improved further: for
example, we will want to enable caching to speed up builds, and
ultimately we should figure out a way to generate at least part of
them, notably the list of packages to be installed, using lcitool.
All of that will happen in later patches: for now, this is good
enough to start using Cirrus CI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to set ctxt->node outside of the function. The
function can set it itself - it has all the info needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I think that since <qemu:commandline/> is kind of a hack, it
doesn't deserve place in the front row.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virStateInitialize() function has ATTRIBUTE_NONNULL()
referring to @root argument (incorrectly anyway) but in
daemonRunStateInit() NULL is passed in anyway.
Then there is virCommandAddArgPair() which also has
ATTRIBUTE_NONNULL() for one of its arguments and then checks the
argument for being NULL anyways.
Signed-off-by:Bihong Yu <yubihong@huawei.com>
Reviewed-by:Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b50a8354f6 added call to qemuDomainDiskBlockJobIsSupported prior
to filling the 'disk' variable resulting in a crash when attempting a
block commit.
https://gitlab.com/libvirt/libvirt/-/issues/31
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Juan Quintela noticed that when he restarted libvirt he was getting
extra iptables rules added by libvirt even though he didn't have any
libvirt networks that used iptables rules. It turns out this also
happens if the firewalld service is restarted. The extra rules are
just the private chains, and they're sometimes being added
unnecessarily because they are added separately in a global
networkPreReloadFirewallRules() that does the init if there are any
active networks, regardless of whether or not any of those networks
will actually add rules to the host firewall.
The fix is to change the check for "any active networks" to instead
check for "any active networks that add firewall rules".
(NB: although the timing seems suspicious, this isn't a new regression
caused by the recently pushed f5418b427 (which forces recreation of
private chains when firewalld is restarted); it was an existing bug
since iptables rules were first put into private chains, even after
commit c6cbe18771 delayed creation of the private chains. The
implication is that any downstream based on v5.1.0 or later that cares
about these extraneous (but harmless) private chains would want to
backport this patch (along with the other two if they aren't already
there))
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that we're storing libvirt.pot in git, it will be in srcdir instead
of builddir. Weblate is responsible for running msgmerge when the .pot
file changes, so add a warning that this target is not for general usage.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're no longer using Zanata, so remove the old push/pull rules.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The old information about managing PO files was outdated, as we're
managing files in a different way with Weblate. This also introduces a
badge showing the translation progress across languages.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Until libvirt 2.5.0 we didn't have a real process for release
notes in place, and we just published the list of commits that
had made it into each release, dividing them into categories that
mostly matched the sections we use today. Those documents haven't
been relevant for years, but they're still in the git repository
and collectively take up almost 2 MiB of disk space.
Let's import the only valuable piece of information they contain,
the release date for each libvirt versions, into the current
document and then drop them for good.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of storing release notes as XML and then converting them
to HTML and ASCII at build time using XSLT and a custom script,
we can use reStructuredText as both the source and ASCII
representation and generate HTML from it using the same tooling
we already use for the rest of the documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ASCII output our scripts produce is already very close to
reStructuredText, and with just a few extra tweaks we can get
almost all of the way there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virDomainUpdateDeviceFlags() was used to update an <interface>, and
the interface type changed from type='network' where the network was
an unmanaged bridge (so actualType == bridge) to type='bridge'
(i.e. actualType *also* == bridge), the update would fail due to the
perceived change in type.
In practice it is okay to switch between any interface types that end
up using a tap device, since libvirt just needs to attach the device
to a new bridge. But in this case we were erroneously rejecting it due
to a conditional that was too restrictive. This is what the code was doing:
if (old->type != new->type)
[allow update]
else
if ((oldActual == bridge and newActual == network)
|| (oldActual == network and newActual == bridge)) {
[allow update]
else
[error]
In the case described above though, old->type and new->type don't match,
but oldActual and newActual are both 'bridge', so we get an error.
This patch changes the inner conditional so that any combination of
'network' and 'bridge' for oldActual and newActual, since they both
use a tap device connected to a bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
