FD passing and TLS is normally setup via private data for the chardev
source. The monitor implementation didn't support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the 'qemuMonitorRemoveFdset', it doesn't make sense
to store it as signed when only unsigned values are expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorRemoveFdset' validates that the 'fdset' argument isn't less
than 0. We can turn it to unsigned and thus avoid the error message
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all code using the 'QOM_CPU_PATH' macro to accept the QOM path
as an argument.
For now the new helper for fetching the path 'qemuProcessGetVCPUQOMPath'
will always return the same hard-coded value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only as a helper in src/qemu/qemu_monitor_json.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
DEBUG_IO and DEBUG_RAW_IO are disabled and hence the code #defined under them
are useless. Remove them.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In order to be able to propagate image configuration to newly formatted
images we need to be able to query it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're only returning the set of fields needed to perform an
attestation, per the SEV API docs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the construction of the command from the variable declaration so
that it doesn't exceed the line length and we can also move the logic of
determining the protocol outside of the command construction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration API takes specific flags which are then converted to
boolean parameters for the command. Extract the flag into helper
variables rather than using ternary operators while constructing the
command itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of a ternary operator we can use the existing helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use 'goto' for looping. Extract the monitor interaction code into
a new function and restructure the logic to avoid jumping back in the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use this approach for other APIs which take a virJSONValue as
argument and the logic is also simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We pass through to glib's hash table functions so we can also use glibs
function prototype definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit bc24810c2c modified code querying blockstats to use the
'query-nodes' parameter so that we can fetch stats also for images which
are not attached to a frontend such as block copy and backup scratch
images.
Unfortunately that broke the old blockstats because if 'query-nodes' is
enabled qemu doesn't output the 'qdev' parameter which our code used for
matching to the disk and also qemu neglects to populate the frontend
stats at all so we can't even switch to using nodename for matching.
To fix this we need to do two calls, one with 'query-nodes' disabled
using the old logic to populate everything and then an additional one
which populates all the remaining images.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/246
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
Use 'virJSONValueObjectAdd' instead of the step-by-step manual JSON
object building.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting the commandline we explicitly set the reconnect timeout
to 0 when it's disabled even when that's the default. Do the same in
the monitor/hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename 'data' to 'backendData' so that it's more clear what the object
represents and 'backend_type' to 'backendType' to go with the common
camel case notation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'virReportEnumRangeError' for the invalid cases and keep the
original error for known but unsupported chardevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the addition of the command wrapper to qemuMonitorJSONAttachCharDev
and rename the function to qemuMonitorJSONAttachCharDevGetProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuMonitorJSONMakeCommandInternal' instead of
'qemuMonitorJSONMakeCommand' + 'virJSONValueObjectAppend'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the first argument to a double pointer so that later the function
can be unified with virJSONValueObjectCreate and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The upcoming QEMU 6.2.0 implements a new event called
DEVICE_UNPLUG_GUEST_ERROR, a new event that reports generic device
unplug errors that were detected by the guest and reported back to QEMU.
This new event is going to be specially useful for pseries guests that
uses newer kernels (must have kernel commit 29c9a2699e71), which is the
case for Fedora 34 at this moment. These guests have the capability of
reporting CPU removal errors back to QEMU which, starting in 6.2.0, will
emit the DEVICE_UNPLUG_GUEST_ERROR event. Libvirt can use this event to
abort the device removal immediately instead of waiting for 'setvcpus'
timeout.
QEMU 6.2.0 is also going to emit DEVICE_UNPLUG_GUEST_ERROR for memory
hotunplug errors, both in pseries and ACPI guests. QEMU 6.1.0 reports
memory removal errors using the MEM_UNPLUG_ERROR event, which is going to
be deprecated by DEVICE_UNPLUG_GUEST_ERROR in 6.2.0. Given that
Libvirt wasn't handling the MEM_UNPLUG_ERROR event we don't need to
worry about it - adding support to DEVICE_UNPLUG_GUEST_ERROR will be
enough to cover all future cases.
This patch adds support to DEVICE_UNPLUG_GUEST_ERROR by adding the
minimal wiring required for Libvirt to be aware of it. The monitor
callback for this event will abort the pending removal operation of the
device reported by the "device" property of the event. Most of the heavy
lifting is already done by existing code that handles
QEMU_DOMAIN_UNPLUGGING_DEVICE_STATUS_GUEST_REJECTED, making our life
easier to abort the pending removal operation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the 'query-nodes' flag to return all stats. The flag was introduced
prior to qemu-2.11 so we can always use it, but we invoke it only when
querying stats. The other invocation is used for detecting the nodenames
which is fragile code.
The images without a frontend don't have the device field so the
extraction code checks need to be relaxed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Open code virHashAddEntry so that the error code path can be avoided.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, some 'error' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto error' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
After previous cleanups, some 'cleanup' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto cleanup' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Let's replace VIR_FREE() calls with g_autofree. Not all calls can
be replaced though - the legitimate ones are kept (e.g. those
which free array, or which free a struct for which we don't have
g_autoptr() yet, and so on).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
A lot of explicit free calls can be saved when virJSONValue
variables are declared with g_autoptr(). There's one caveat:
there was a slight deviation from our usual pattern such that
@cmd variable was not initialized to NULL but as the very first
step it was assigned a value using qemuMonitorJSONMakeCommand().
While this works in theory it upset my GCC-11.2 (but only when
building with -O2). So I had to initialize the variable in such
case too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The reason why @entry variable in qemuMonitorJSONExtractPRManagerInfo()
was declared at the top most level was that the variable is used under
the cleanup label. However, if declared using g_autofree then the
variable can be declared inside the loop it is used in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There's one place (specifically qemuMonitorJSONParseCPUModel())
where we can avoid explicit free call for qemuMonitorCPUModelInfo
struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We have g_autoptr() for virCPUData struct defined already. Let's
use it in qemu_monitor_json.c and drop explicit free calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorJSONQueryRxFilterParse() function is called to
parse the output of 'query-rx-filter' and store results into
passed virNetDevRxFilter structure. However, it is doing so in a
bit clumsy way - the return pointer is set in all cases (i.e.
even in case of error) and thus the cleanup label is more
complicated than it needs to be. With a help of g_autoptr() and
g_steal_pointer() the return pointer can be set only in case of
success - which is what callers expect anyway.
The same applies to qemuMonitorJSONQueryRxFilter().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In the qemuMonitorJSONGetMigrationStats() there's a code under
cleanup label that's clearing returned @stats if the function
returns with an error. However, transitively there's just one
caller - qemuMigrationAnyFetchStats() - and it doesn't care for
this behaviour. Drop the code to simplify the cleanup label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
All callers of qemuMonitorJSONHumanCommand() pass a non-NULL pointer
as @reply_str therefore there's no need to check whether it is NULL.
NB, the sister function (qemuMonitorJSONArbitraryCommand()) doesn't
check for NULL either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In qemuMonitorJSONCommandWithFd() given command (represented by
virJSONValue struct) is translated to string (represented by
virBuffer). The ownership of the string is then transferred to
the message which is then sent. The downside of this approach is
we have to have an explicit call to free the string from the
message. But if the message just "borrowed" the string (which it
can safely do because it is just reading from the string) then
automatic free of the buffer takes care of freeing the string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorNextCommandID() function can never fail. There's
no need to check for its retval then. Moreover, the temporary
variable used to hold the retval can be declared in the inner
most block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
