This macro seems to be defined only on linux/unix and it fails during
mingw build. Its value is '16' (taken from net/if.h) so define it if
it's not defined.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently, build fails on FreeBSD because its struct ifreq does not
have ifr_hwaddr member. In order to fix that, check if this member
is present, otherwise fall back to the stub version of the
virNetDev{Add,Del}Multi functions.
The complaint is that if cleanup is called when virFileReadAll fails,
then mcast->entries is NULL and could be dereferenced in the clear
function. After following the code some - I saw that the caller to
the function (virNetDevGetMulticastTable) will also call
virNetDevMcastListClear if this function returns -1, so this
isn't necessary, so I removed the call.
Coverity complains that because the for loop is from 0 to 5 (max tokens)
and the impending switch/case statements used each of the #define values
that the 'default' wouldn't reachable. This patch will convert the #define's
into enum's and add the obligatory dead_error_begin marker for these type
situations.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:
* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
virNetDevLinkDump() gets a message from netlink into "resp", then
calls nlmsg_parse() to fill the table "tb" with pointers into resp. It
then returns tb to its caller, but not before freeing the buffer at
resp. That means that all the callers of virNetDevLinkDump() are
examining memory that has already been freed. This can be verified by
filling the buffer at resp with garbage prior to freeing it (or, I
suppose, just running libvirtd under valgrind) then performing some
operation that calls virNetDevLinkDump().
The code has been like this ever since virNetDevLinkDump() was written
- the original author didn't notice it, and neither did later
additional users of the function. It has only been pure luck (or maybe
a lack of heavy load, and/or maybe an allocation algorithm in malloc()
that delays re-use of just-freed memory) that has kept this from
causing errors, for example when configuring a PCI passthrough or
macvtap passthrough network interface.
The solution taken in this patch is the simplest - just return resp to
the caller along with tb, then have the caller free it after they are
finished using the data (pointers) in tb. I alternately could have
made a cleaner interface by creating a new struct that put tb and resp
together along with a vir*Free() function for it, but this function is
only used in a couple places, and I'm not sure there will be
additional new uses of virNetDevLinkDump(), so the value of adding a
new type, extra APIs, etc. is dubious.
This same structure will be used to retrieve RX filter info for
interfaces on the host via netlink messages, and RX filter info for
interfaces on the guest via the qemu "query-rx-filter" command.
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virFileReadAll already logs an error. If reading the 'speed' file
fails with EINVAL, we log an error even though we ignore it. If it
fails with other errors, we log two errors.
Use virFileReadAllQuiet - ignore EINVAL and report just one error
in other cases.
Fixes this error on libvirtd startup:
2014-06-30 12:47:14.583+0000: 20971: error : virFileReadAll:1297 :
Failed to read file '/sys/class/net/wlan0/speed': Invalid argument
The kernel's more broken than one would think. Various drivers report
various (usually spurious) values if the interface is in other state
than 'up' . While on some we experience -EINVAL when read()-ing the
speed sysfs file, with other drivers we might get anything from 0 to
UINT_MAX. If that's the case it's better to not report link speed.
Well, the interface is not up anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we're compiling on non-Linux platform, the virNetDevGetLinkInfo()
is a dummy function which barely logs debug message that getting link
info is not supported. However, while the debug message was prepared
for printing the interface name too, I actually forgot to pass the
variable which resulted in build error on platforms like mingw or
FreeBSD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The purpose of this function is to fetch link state
and link speed for given NIC name from the SYSFS.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Functions virNetDevRestoreMacAddress() and virNetDevRestoreMacAddress()
allocate memory for variable @path using virAsprintf(), but they
haven't freed that memory before returning out.
Signed-off-by: Zhang bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In order to make a client-only build successful on RHEL4 (yes, you
read that correctly!), commit 3ed2e54 modified src/util/virnetdev.c so
that the functional version of virNetDevGetVLanID() was only compiled
if GET_VLAN_VID_CMD was defined. However, it is *never* defined, but
is only an enum value, so the proper version was no longer compiled
even on platforms that support it. This resulted in the vlan tag not
being properly set for guest traffic on VEPA mode guest macvtap
interfaces that were bound to a vlan interface (that's the only place
that libvirt currently uses virNetDevGetVLanID)
Since there is no way to compile conditionally based on the presence
of an enum value, this patch modifies configure.ac to check for said
enum value with AC_CHECK_DECLS(), which #defines
HAVE_DECL_GET_VLAN_VID_CMD to 1 if it's successful compiling a test
program that uses GET_VLAN_VID_CMD (and still #defines it, but to 0,
if it's not successful). We can then make the compilation of
virNetDevGetVLanID() conditional on the value of
HAVE_DECL_GET_VLAN_VID_CMD.
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=971325
The problem was that if virPCIGetVirtualFunctions was given the name
of a non-existent interface, it would return to its caller without
initializing the pointer to the array of virtual functions to NULL,
and the caller (virNetDevGetVirtualFunctions) would try to VIR_FREE()
the invalid pointer.
The final error message before the crash would be:
virPCIGetVirtualFunctions:2088 :
Failed to open dir '/sys/class/net/eth2/device':
No such file or directory
In this patch I move the initialization in virPCIGetVirtualFunctions()
to the begining of the function, and also do an explicit
initialization in virNetDevGetVirtualFunctions, just in case someone
in the future adds code into that function prior to the call to
virPCIGetVirtualFunctions.
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
- provide virNetDevSetMAC() implementation based on SIOCSIFLLADDR
ioctl.
- adjust virNetDevExists() to check for ENXIO error because
FreeBSD throws it when device doesn't exist
Signed-off-by: Eric Blake <eblake@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
On cygwin, compilation failed because SIOCSIFHWADDR is undefined.
* src/util/virnetdev.c (virNetDevSetMAC): Cygwin can query but not
set mac address.
Signed-off-by: Eric Blake <eblake@redhat.com>
FreeBSD (and maybe other BSDs) have different member
names in struct ifreq when compared to Linux, such as:
- uses ifr_data instead of ifr_newname for setting
interface names
- uses ifr_index instead of ifr_ifindex for interface
index
Also, add a check for SIOCGIFHWADDR for virNetDevValidateConfig().
Use AF_LOCAL if AF_PACKET is not available.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements
util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)*recvbuf;
^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)recvbuf;
Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The RHEL4 vintage header files do not define GET_VLAN_VID_CMD.
Conditionally define it in our source, since the kernel can
raise a runtime error if it isn't supported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is an adjustment to the fix for
https://bugzilla.redhat.com/show_bug.cgi?id=889319
to account for two bonehead mistakes I made.
commit ac2797cf2a attempted to fix a
problem with netlink in newer kernels requiring an extra attribute
with a filter flag set in order to receive an IFLA_VFINFO_LIST from
netlink. Unfortunately, the #ifdef that protected against compiling it
in on systems without the new flag went a bit too far, assuring that
the new code would *never* be compiled, and even if it had, the code
was incorrect.
The first problem was that, while some IFLA_* enum values are also
their existence at compile time, IFLA_EXT_MASK *isn't* #defined, so
checking to see if it's #defined is not a valid method of determining
whether or not to add the attribute. Fortunately, the flag that is
being set (RTEXT_FILTER_VF) *is* #defined, and it is never present if
IFLA_EXT_MASK isn't, so it's sufficient to just check for that flag.
And to top it off, due to the code not actually compiling when I
thought it did, I didn't realize that I'd been given the wrong arglist
to nla_put() - you can't just send a const value to nla_put, you have
to send it a pointer to memory containing what you want to add to the
message, along with the length of that memory.
This time I've actually sent the patch over to the other machine
that's experiencing the problem, applied it to the branch being used
(0.10.2) and verified that it works properly, i.e. it does fix the
problem it's supposed to fix. :-/
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=889319
When assigning an SRIOV virtual function to a guest using "intelligent
PCI passthrough" (<interface type='hostdev'>, which sets the MAC
address and vlan tag of the VF before passing its info to qemu),
libvirt first learns the current MAC address and vlan tag by sending
an NLM_F_REQUEST message for the VF's PF (physical function) to the
kernel via a NETLINK_ROUTE socket (see virNetDevLinkDump()); the
response message's IFLA_VFINFO_LIST section is examined to extract the
info for the particular VF being assigned.
This worked fine with kernels up until kernel commit
115c9b81928360d769a76c632bae62d15206a94a (first appearing in upstream
kernel 3.3) which changed the ABI to not return IFLA_VFINFO_LIST in
the response until a newly introduced IFLA_EXT_MASK field was included
in the request, with the (newly introduced, of course) RTEXT_FILTER_VF
flag set.
The justification for this ABI change was that new fields had been
added to the VFINFO, causing NLM_F_REQUEST messages to fail on systems
with large numbers of VFs if the requesting application didn't have a
large enough buffer for all the info. The idea is that most
applications doing an NLM_F_REQUEST don't care about VFINFO anyway, so
eliminating it from the response would lower the requirements on
buffer size. Apparently, the people who pushed this patch made the
mistaken assumption that iproute2 (the "ip" command) was the only
package that used IFLA_VFINFO_LIST, so it wouldn't break anything else
(and they made sure that iproute2 was fixed.
The logic of this "fix" is debatable at best (one could claim that the
proper fix would be for the applications in question to be fixed so
that they properly sized the buffer, which is what libvirt does
(purely by virtue of using libnl), but it is what it is and we have to
deal with it.
In order for <interface type='hostdev'> to work properly on systems
with a kernel 3.3 or later, libvirt needs to add the afore-mentioned
IFLA_EXT_MASK field with RTEXT_FILTER_VF set.
Of course we also need to continue working on systems with older
kernels, so that one bit of code is compiled conditionally. The one
time this could cause problems is if the libvirt binary was built on a
system without IFLA_EXT_MASK which was subsequently updated to a
kernel that *did* have it. That could be solved by manually providing
the values of IFLA_EXT_MASK and RTEXT_FILTER_VF and adding it to the
message anyway, but I'm uncertain what that might actually do on a
system that didn't support the message, so for the time being we'll
just fail in that case (which will very likely never happen anyway).
This patch fixes the lack of error messages when libvirt fails to find
VFINFO in a returned netlinke response message.
https://bugzilla.redhat.com/show_bug.cgi?id=827519#c10 is an example
of the error message that was previously logged when the
IFLA_VFINFO_LIST object was missing from the netlink response. The
reason for this failure is detailed in
https://bugzilla.redhat.com/show_bug.cgi?id=889319
Even though that root problem has been fixed, the experience of
finding the root cause shows us how important it is to properly log an
error message in these cases. This patch *seems* to replace the entire
function, but really most of the changes are due to moving code that
was previously inside an if() statement out to the top level of the
function (the original if() was reversed and made to log an error and
return).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
FreeBSD and OpenBSD have a <net/if.h> that is not self-contained;
and mingw lacks the header altogether. But gnulib has just taken
care of that for us, so we might as well simplify our code. In
the process, I got a syntax-check failure if we don't also take
the gnulib execinfo module.
* .gnulib: Update to latest, for execinfo and net_if.
* bootstrap.conf (gnulib_modules): Add execinfo and net_if modules.
* configure.ac: Let gnulib check for headers. Simplify check for
'struct ifreq', while also including enough prereq headers.
* src/internal.h (IF_NAMESIZE): Drop, now that gnulib guarantees it.
* src/nwfilter/nwfilter_learnipaddr.h: Use correct header for
IF_NAMESIZE.
* src/util/virnetdev.c (includes): Assume <net/if.h> exists.
* src/util/virnetdevbridge.c (includes): Likewise.
* src/util/virnetdevtap.c (includes): Likewise.
* src/util/logging.c (includes): Assume <execinfo.h> exists.
(virLogStackTraceToFd): Handle gnulib's fallback implementation.
This patch improve all the API in virnetlink.c to support
all kinds of netlink protocols, and make all netlink sockets
be able to join in groups.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
