Commit Graph

60 Commits

Author SHA1 Message Date
Laine Stump
8b93d78c83 conf: support manually specifying VFIO variant driver in <hostdev> XML
This patch makes it possible to manually specify which VFIO variant
driver to use for PCI hostdev device assignment, so that, e.g. you
could force use of a VFIO "variant" driver, with e.g.

  <driver model='mlx5_vfio_pci'/>

or alternately to force use of the generic vfio-pci driver with

  <driver model='vfio-pci'/>

when libvirt would have normally (after applying a subsequent patch)
found a "better match" for a device in the active kernel's
modules.alias file. (The main potential use of this manual override
would probably be to work around a bug in a new VFIO variant driver by
temporarily not using that driver).

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2024-01-08 01:00:08 -05:00
Peter Krempa
1eb67d24de conf: network: Provide only virNetworkDefParse
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-10-06 10:54:25 +02:00
Laine Stump
d9074b8e01 tests: replace explicit virNetworkDefFree() with g_autoptr(virNetworkDef)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-08-24 12:22:47 -04:00
Peng Liang
48e8c36b05 tests: Remove unused includes
Signed-off-by: Peng Liang <tcx4c70@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-16 06:43:58 +02:00
Michal Privoznik
12be42ee7e network: Generate TFTP config regardless of DHCP
We already allow users to provide TFTP root path in network XML
and not specify any DHCP. This makes sense, because dnsmasq is
not only DHCP server but also TFTP server and users might have
a DHCP server configured on their own, outside of libvirt's
control and want just the TFTP part.

By moving TFTP config generator out of DHCP generator and calling
it for every IPv4 range, users can finally enable just TFTP.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026765
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-01 09:40:40 +02:00
Ján Tomko
e062566885 tests: network: use g_autofree
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-09-09 18:06:13 +02:00
Ján Tomko
d66fb7ac15 tests: use g_autoptr instead of virObjectUnref
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-09-09 18:06:13 +02:00
Michal Privoznik
c8238579fb lib: Drop internal virXXXPtr typedefs
Historically, we declared pointer type to our types:

  typedef struct _virXXX virXXX;
  typedef virXXX *virXXXPtr;

But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.

This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:

https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-04-13 17:00:38 +02:00
Daniel P. Berrangé
927acaedec conf: add an attribute to turn on NAT for IPv6 virtual networks
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.

This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute

   <forward mode="nat">
     <nat ipv6="yes"/>
   </forward>

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-15 17:10:15 +01:00
Julio Faracco
7e5a40fd0f tests: Add tests for <lease/> to cover dnsmasq settings
New tests are required to cover some new XML syntax entry for
<lease/> option. This includes schema testing and other features
like unit attribute and lease value. This commit includes hostsfile
checks adding new files for each test case that is manipulating <host/>
tag.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-23 10:59:33 +02:00
Laine Stump
31d95b182e conf: parse/format <port isolated='yes|no'/>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:

  <domain><interface>
  <domain><interface><actual> (only in domain status)
  <network>
  <networkport>

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-20 23:09:27 -05:00
Michal Privoznik
4fa804c0c7 tests: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Cole Robinson
fb9f6ce625 network: wire up dnsmasq option xmlns
This maps to XML like:

  <network xmlns:dnsmasq='http://libvirt.org/schemas/network/dnsmasq/1.0'>
    ...
    <dnsmasq:options>
      <dnsmasq:option value="foo=bar"/>
      <dnsmasq:option value="cname=*.foo.example.com,master.example.com"/>
    </dnsmasq:options>
  </network>

To dnsmasq config options

  ...
  foo=bar
  cname=*.foo.example.com,master.example.com

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-07-17 17:18:56 -04:00
Cole Robinson
8911d843f3 conf: Add network xmlopt argument
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-07-17 17:18:56 -04:00
Casey Callendrello
682be11505 network: set mtu as a DHCP option when specified
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.

Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-01-31 17:45:41 +01:00
Erik Skultety
5165ff0971 src: More cleanup of some system headers already contained in internal.h
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:39 +02:00
Erik Skultety
9403b63102 internal: Move <stdio.h> include to internal.h
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:38 +02:00
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Laine Stump
15b5902db9 network: don't add "no-resolv" if we still need DNS servers from resolv.conf
It was pointed out here:

  https://bugzilla.redhat.com/show_bug.cgi?id=1331796#c4

that we shouldn't be adding a "no-resolv" to the dnsmasq.conf file for
a network if there isn't any <forwarder> element that specifies an IP
address but no qualifying domain. If there is such an element, it will
handle all DNS requests that weren't otherwise handled by one of the
forwarder entries with a matching domain attribute. If not, then DNS
requests that don't match the domain of any <forwarder> would not be
resolved if we added no-resolv.

So, only add "no-resolv" when there is at least one <forwarder>
element that specifies an IP address but no qualifying domain.
2017-03-21 11:25:59 -04:00
Laine Stump
68a42bf6f7 conf: support configuring mtu size in a virtual network
Example:

  <network>
     ...
     <mtu size='9000'/>
     ...

If mtu is unset, it's assumed that we want the default for whatever is
the underlying transport (usually this is 1500).

This setting isn't yet wired in, so it will have no effect.

This partially resolves: https://bugzilla.redhat.com/1224348
2017-02-07 13:52:06 -05:00
Laine Stump
9065cfaa88 network: allow disabling dnsmasq's DNS server
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.

This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:

   <dns enable='no'/>

to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
2016-08-19 21:10:34 -04:00
Laine Stump
25e8112d7c network: new network forward mode 'open'
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
2016-08-19 21:05:15 -04:00
Brandon Bennett
47a0866bce Allow custom metadata in network configuration XML
This replicates the metadata field found in the domain configuration
    and adds it to the network configuration XML.
2016-07-01 13:05:25 -04:00
Tomáš Ryšavý
239caffb1d tests: Rename virtTestCompareToFile to virTestCompareToFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Andrea Bolognani
bf01999e9f tests: Fix enumeration value
Commit 3a773c43c8 introduced the testCompareNetXML2XMLResult
enumeration; however, in one instance the result variable was
assigned a value from the very similar testCompareDocXML2XMLResult
enumeration, leading to a build error.

  networkxml2xmltest.c:33:42: error:
    implicit conversion from enumeration type 'testCompareDomXML2XMLResult'
    to different enumeration type 'testCompareNetXML2XMLResult'
    [-Werror,-Wenum-conversion]

  testCompareNetXML2XMLResult result = TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS;
                              ~~~~~~   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use the proper value (TEST_COMPARE_NET_XML2XML_RESULT_SUCCESS) instead.
2016-04-20 14:36:37 +02:00
Laine Stump
3583e75d7e network: prevent duplicate entries in network device pools
Prior to this patch we didn't make any attempt to prevent two entries
in the array of interfaces/PCI devices from pointing to the same
device.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1002423
2016-04-19 12:39:13 -04:00
Laine Stump
3a773c43c8 test: enable testing for expected parse errors in network XML
This is patterned after similar functionality for domain XML tests,
but tries harder to avoid reading non-existent networkxml2xmlout data
file when parse fails.
2016-04-19 12:35:22 -04:00
Martin Kletzander
1f24c1494a conf: Don't try formating non-existing addresses
Commit a6f9af8292 added checking for address colisions between
starting and ending addresses of forwarding addresses, but forgot that
there might be no addresses set at all.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-11 16:07:41 +02:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Cole Robinson
bdbe26b504 tests: Use *DefParseFile more 2015-04-23 17:08:48 -04:00
Laine Stump
40961978ee conf: new network bridge device attribute macTableManager
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses.  In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).

The attribute looks like this in the configuration:

  <network>
    <name>test</name>
    <bridge name='br0' macTableManager='libvirt'/>
    ...

This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
2014-12-08 14:41:37 -05:00
Peter Krempa
4cf1c3fab1 conf: net: Correctly switch how to format address fields
When formatting the forward mode addresses or interfaces the switch was
done based on the type of the network rather than of the type of the
individual <interface>/<address> element. In case a user would specify
an incorrect network type ("passhtrough") with <address> elements,
libvirtd would crash as it would attempt to format an <interface>.

Use the type of the individual element to format the XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132347
2014-08-21 15:55:07 +02:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Diego Woitasen
22547b4c98 Add forwarder attribute to <dns/> element
Useful to set custom forwarders instead of using the contents of
/etc/resolv.conf. It helps me to setup dnsmasq as local nameserver to
resolve VM domain names from domain 0, when domain option is used.

Signed-off-by: Diego Woitasen <diego.woitasen@vhgroup.net>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-17 17:47:33 -06:00
Ján Tomko
437b7944a8 Add '<nat>' element to '<forward>' network schemas
Commits 905629f4 and 1716e7a6 have added support for specifying
an IPv4 range and a port range to be used by NAT:
<forward mode='nat'>
  <nat>
    <address start='10.20.30.40' end='10.20.30.44'/>
    <port start='60000' end='65432'/>
  </nat>
</forward>

https://bugzilla.redhat.com/show_bug.cgi?id=1004364
2013-09-05 13:45:49 +02:00
Ján Tomko
2d9185a9f3 Test network update XML parsing
Add checks for updating sections of network definition via
virNetworkDefUpdateSection.

https://bugzilla.redhat.com/show_bug.cgi?id=989569
2013-08-28 08:05:46 +02:00
Ján Tomko
d8bd24a9ec Remove the space before the slash in network XML
This matches the style we use elsewhere and allows
nat-network-dns-srv-record{,-minimal}.xml to be tested in
network XML -> XML test.
2013-08-28 08:05:46 +02:00
Laine Stump
4f595ba61c network: permit upstream forwarding of unqualified DNS names
This resolves the issue that prompted the filing of

  https://bugzilla.redhat.com/show_bug.cgi?id=928638

(although the request there is for something much larger and more
general than this patch).

commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.

This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).

When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
2013-08-14 09:46:22 -04:00
Michal Privoznik
dc6f2dadac Introduce OOM reporting to virAsprintf
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
2013-07-10 11:07:31 +02:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Gene Czarcinski
0b73a763f3 use client id for IPv6 DHCP host definition
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-25 02:49:06 -05:00
Gene Czarcinski
705e67d40b network: allow guest to guest IPv6 without gateway definition
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified.  This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).

This patch adds a new attribute "ipv6" at the toplevel of a <network>
object.  If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.

Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:

   net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1

This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.

To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.

Documentation related to this patch has been updated.
The network schema has also been updated.
2012-12-05 14:58:32 -05:00
Shradha Shah
1446003419 conf: parser/formatter/rng for <forward mode='hostdev'>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
2012-08-17 15:43:26 -04:00
Laine Stump
4af3cbafdd conf: support partially-specified <virtualport> in parser and formatter
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.

One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).

Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.

Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).

This patch modifies the parser and formatter of the <virtualport>
element in the following ways:

* because most of the attributes in a virNetDevVPortProfile are fixed
  size binary data with no reserved values, there is no way to embed a
  "this value wasn't specified" sentinel into the existing data. To
  solve this problem, the new *_specified fields in the
  virNetDevVPortProfile object that were added in a previous patch of
  this series are now set when the corresponding attribute is present
  during the parse.

* allow parsing/formatting a <virtualport> that has no type set. In
  this case, all fields are settable, but all are also optional.

* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
  set and an instanceid/interfaceid is expected but not provided, a
  random one will be generated. This was previously the default
  behavior, but is now done only for virtualports inside an
  <interface> definition, not for those in <network> or <portgroup>.

* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
  set the parser will call the new
  virNetDevVPortProfileCheckComplete() functions at the end of the
  parser to check for any missing attributes (based on type), and
  return failure if anything is missing. This used to be default
  behavior. Now it is only used for the virtualport defined inside an
  interface's <actual> element (by the time you've figured out the
  contents of <actual>, you should have all the necessary data to fill
  in the entire virtualport)

* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
  parser will return an error if the virtualport has no type
  attribute. This also was previously the default behavior, but isn't
  needed in the case of the virtualport for a type='network' interface
  (i.e. the exact type isn't yet known), or the virtualport of a
  portgroup (i.e. the portgroup just has modifiers for the network's
  virtualport, which *does* require a type) - in those cases, the
  check will be done at domain startup, once the final virtualport is
  assembled (this is handled in the next patch).
2012-08-14 15:47:50 -04:00
Martin Kletzander
9943276fd2 Cleanup for a return statement in source files
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:

List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$'

Found files were modified with this command:
sed -i -e                                                                 \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'

Then checked for nonsense.

The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' |             \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e                            \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
2012-03-26 14:45:22 -06:00
Eric Blake
8fe454ce90 build: expand rule to cover testsuite
The bulk of this patch was done with:

sed -i 's/\(\bfree *(/VIR_FREE(/g' tests/*.c

followed by fixing the few compile errors that resulted.

* cfg.mk (exclude_file_name_regexp--sc_prohibit_raw_allocation):
Remove tests from exemption.
* tests/testutils.h: Add common header.
* tests/commandhelper.c: Fix offenders.
* tests/cputest.c: Likewise.
* tests/domainsnapshotxml2xmltest.c: Likewise.
* tests/interfacexml2xmltest.c: Likewise.
* tests/networkxml2argvtest.c: Likewise.
* tests/networkxml2xmltest.c: Likewise.
* tests/nodedevxml2xmltest.c: Likewise.
* tests/nodeinfotest.c: Likewise.
* tests/nwfilterxml2xmltest.c: Likewise.
* tests/qemuargv2xmltest.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxmlnstest.c: Likewise.
* tests/qparamtest.c: Likewise.
* tests/sexpr2xmltest.c: Likewise.
* tests/storagepoolxml2xmltest.c: Likewise.
* tests/storagevolxml2xmltest.c: Likewise.
* tests/testutils.c: Likewise.
* tests/virshtest.c: Likewise.
* tests/xencapstest.c: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/xml2sexprtest.c: Likewise.
2012-02-03 10:41:46 -07:00