Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
If the virStringSearch() returns a 0 (zero), then each of the uses
of the call will just jump to cleanup forgetting to free the returned
empty list. Expand the scope a bit of each use and free at cleanup.
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
Since the holdtime is not supported by VBOX SDK, it's being simulated
by sleeping before sending the key-up codes. The key-up codes are
auto-generated based on XT codeset rules (adding of 0x80 to key-down)
which results in the same behavior as for QEMU implementation.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
For VBOX it's most likely that the connection is vbox:///session and it
runs with local non-root account. This caused permission denied when
LOCALSTATEDIR was used to create temp file. This patch makes use of the
virGetUserCacheDirectory to address this problem for non-root users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
This function returned non-inactive domains instead of active
domains. This broke virConnectNumOfDefinedDomains() and
virConnectListDefinedDomains() functions.
We were missing check for the fact that the storage driver was found and
in case there is no vbox storage driver available, daemon raised the
following error each start:
error : virRegisterStorageDriver:592 : driver in
virRegisterStorageDriver must not be NULL
Fixing this makes the condition unified with networkDriver registration
in vbox as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity is complaining about overwriting value in 'rc' variable
without using the old value because it somehow doesn't recognize that
the value is used by MACRO. The 'rc' variable is there only for checking
return code so it's save to remove it and make coverity happy.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
After rewriting the whole driver, Only version specified code is
remained in vbox_tmpl.c. So, this patch removes those unused macros
header files in vbox_tmpl.c.
The GetMedium will always return a IHardDisk object them.
In 2.2 and 3.0, it is what GetHardDisk exactly do. In 3.1 and later,
The IMedium is same as IHardDisk.
The CreateHardDiskMedium only support create HardDisk for medium
type, and it only works when vbox version >= 3.1. This patch make
the function workable with all vbox versions and rename it as
CreateHardDisk.
In vbox 2.2 and 3.0 this function will create a IHardDisk object.
In vbox later than 3.0, this function will create a IMedium object.
In old version, function FindMedium in UIVirtualBox doesn't work
for vbox2.2 and 3.0. We assume it will not be used when vbox in
these versions.
But when rewriting vboxStorageVolLookupByPath, we found it was
compatibe to use FindMedium to get a IHardDisk object, even in
vbox old versions. To achieve this, first make FindMedium call
FindHardDisk when VBOX_API_VERSION < 4000000.
Then change the argument type **IMedium to **IHardDisk. (As the
rules in heriachy, we can't transfer a IHardDisk to match
IMedium in output)
In vbox 2.2 and 3.0, the caller must be aware that they will get
a IHardDisk object in return.
We use typedef IMedium IHardDisk to make IHardDisk hierachy from
IMedium (Actually it did on vbox 2.2 and 3.0's C++ API).
So when calling
VBOX_MEDIUM_FUNC_ARG*(IHardDisk, func, args)
we can directly replace it to
gVBoxAPI.UIMedium.func(IHardDisk, args)
When dealing with this two types, we get some rules from it's
hierachy relationship.
When using IHardDisk and IMedium as input, we can't transfer a
IMedium to IHardDisk. Like:
gVBoxAPI.UIHardDisk.func(IHardDisk *hardDisk, args)
Here, we can't put a *IMedium as a argument.
When using IHardDisk and IMedium as output, we can't transfer a
IHardDisk to IMedium. Like:
gVBoxAPI.UIMachine.GetMedium(IMedium **out)
Here, we can't put a **IHardDisk as a argument. If this case
do happen, we either change the API to GetHardDisk or write a
new one.
This patch rewrites the following functions
*vboxStorageOpen
*vboxStorageClose
*vboxConnectNumOfStoragePools
*vboxConnectListStoragePools
*vboxStoragePoolLookupByName
These functions do not call any vbox API, so I directly move it
from vbox_tmpl.c to vbox_storage.c
A small improvement is made on vboxConnectListStoragePools.
The if condition nnames == 1 is modified to nnames > 0. So if the
caller put more than one slot to get active storage pools, the new
function will return exactly one, while the old one would only
return 0.
There are lots of macro declarations in vbox_common.c,
vbox_network.c, and the coming vbox_storage.c which simply the API
calling. Since they are totally the same. We shouldn't keep three
copies of that, so they are moved to vbox_common.h.
Note: The macros are quite different from those in vbox_tmpl.c,
because they are using different API.
We should follow the rules that CHECK macro only do checking works.
But this VBOX_OBJECT_CHECK and VBOX_OBJECT_HOST_CHECK declared some
varibles at the same time, which broke the rule. So the patch
removed this macros and dispatched it in source code.
The storage driver is still not rewriten at this point. So, I
remains the VBOX_OBJECT_CHECK macro in vbox_tmpl.c. But this will
finally be removed in patch 'vbox: Remove unused things in vbox_tmpl.c'
