Remove all the uses of vshStrdup in favor of GLib's g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529256
If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:
(1)# virsh vol-resize --pool default --vol vol-test 5M
error: Failed to change size of volume 'vol-test' to 5M
error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified
(2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
error: Failed to change size of volume 'volds' by 10M
error: invalid argument: can't shrink capacity below existing allocation
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately vol-create-as
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The way we usually write functions is that we start the work and
if something goes bad we goto cleanup and roll back there. Or
just free resources that are no longer needed. Do the same here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Rather than continually cut-n-paste the strings into each command,
create common macros to be used generically. Replace the more commonly
used "vol" option with a macro. This also adjusts 2 commands that
didn't have the correct helpstr - 'vol-create-from' and 'vol-clone'.
Both are described in the man page as taking vol, path, or key and
the code uses the virshCommandOptVol instead of virshCommandOptVolBy.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The macro is slightly adjusted to add an argument "_helpstr". This
will be passed as a translation macro string since other uses of the
option may not have the same exact help string (such as is the case
when the uuid is not suppliable for create commands).
In virsh-pool.c - we'll create a singular VIRSH_COMMON_OPT_POOL_FULL
in order to pass along the 'N_("pool name or uuid")'
In virsh-volume.c there will be a VIRSH_COMMON_OPT_POOL_FULL and a
VIRSH_COMMON_OPT_POOL_NAME, which passes 'N_("pool name")' for
the commands that can only pass a name. There will also be a
VIRSH_COMMON_OPT_POOL_OPTIONAL which is used for the command
options which use OT_STRING and don't require the --pool argument.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
When shrinking a volume by a certain size, instead of typing
vol-resize volume 1G --delta --shrink
we allow the convience of specifying a negative value:
vol-resize volume -1G --delta --shrink
getting the same results with one more character.
A negative value only makes sense as a delta. Imply the
--delta parameter if the value is negative.
Still require --shrink, because the operation is potentially
destructive.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.
Updated the man page to describe the new flag.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Commit 570d0f63 describes disabling negative offset usage for
vol-upload/download (e.g. cmdVolDownload and cmdVolUpload; however,
the change was only made to cmdVolDownload. There was no change to
cmdVolUpload. This patch adds the same checks for vol-upload.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
According to comments in parsing functions, optional options should be
specified *after* required ones. It makes sense and help output looks
cleaner. The only exceptions are options with type == VSH_OT_ARGV.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.
However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file. Providing other negative values resulted in errors such as:
$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
--offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument
$
Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op. Therefore,
disallow a negative value for offset.
Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:
Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':
Currently we'd return:
$ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
Name: test.qcow
Type: file
Capacity: 100.00 MiB
Allocation: 212.00 KiB
After the fix:
$ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
