https://bugzilla.redhat.com/show_bug.cgi?id=1524230
The qemuBuildVhostuserCommandLine builds command line for
vhostuser type interfaces. It is duplicating some code of the
function it is called from (qemuBuildInterfaceCommandLine)
because of the way it's called. If we merge it into the caller
not only we save a few lines but we also enable checks that we
would have to duplicate otherwise (e.g. QoS availability).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we have variables A, B, C then there are two ways to free
them. Either in the order they are declared or the reversed one.
Any other ordering is confusing. In this commit I'm reordering
calls to VIR_FREE in the reversed order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
Introduce vfio-ap capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
IOThread pids info will lost after libvirtd restart, then
if we call pinIOThread, sched_setaffinity will be called with
pid 0, not IOThread pid. So pinIOThread cannot work normally.
Signed-off-by: Jie Wang <wangjie88.huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
virXMLFormatElement() frees attrBuf on success, but not necessarily
on failure. Most other callers of this function take the time to
reset attrBuf afterwords, but qemuDomainObjPrivateXMLFormatBlockjobs()
was relying on it succeeding, and could thus result in a memory leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU @cfg config variable is unused in context of qemuProcessInit,
let's drop it.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We now explicitly handle media change elsewhere so we can drop the
switch statement. This will also make it more intuitive once CDROM
device hotplug might be supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk hotplug has slightly different semantics from media changing. Move
the media change code out and add proper initialization of the new
source object and proper cleanups if something fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk hotplug code also overloads media change which is not ideal.
This will allow splitting out of the media change code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk storage source needs to be prepared if we want to use -blockdev
or secrets for the new media image. It does not hurt to do the same for
the legacy hotplug code as well.
Unfortunately helpers like qemuDomainPrepareDiskSource take
virDomainDiskDef as an argument and it would be hard to fix them to take
an explicit source, so the function also temporarily replaces disk->src
for the new source in this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some functions require us to replace disk->src with the new source for
them to work properly. To avoid confusion all places which allow
explicit virStorageSource should get the appropriate definition.
The legacy code fortunately does not need anything from the old source
so that does not require modifications.
Blockdev does require the old definition so we'll pass it explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the code is also used when changing media we need to allow
specifying explicit source for which we are going to prepare. With this
change callers don't have to replace disk->src with the new source
definition for generating these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
qemu media changing code tried to assume old media's format for the new
one if that was not specified. Since the format will always be present
it does not make sense to keep the code around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Old media changing code does not bother setting up the secrets for new
media or actually removing/adding of the corresponding objects.
Additionally it uses secrets setup for the old image to be removed as
the secret for the new image which is wrong.
Remove the support for secrets while changing media for the legacy
approach. The only reasonable way to fix it is when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de652201b19d875f0eff730dc28e689e.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Preparing the storage source prior to assigning the alias will not work
as the names of the certain objects depend on the alias for the legacy
hotplug case as we generate the object names for the secrets based on
the alias.
This reverts commit 192fdaa614e3800255048a8a70c1292ccf18397a.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function updates the used QEMU capabilities of @vm by querying
the QEMU capabilities cache.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Turns out, there are couple of bugs that prevent this feature
from being operational. Given how close to the release we are
disable the feature temporarily. Hopefully, it can be enabled
back after all the bugs are fixed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Let's ignore the checking of interface type when we call the function
qemuARPGetInterfaces to get IP from host's arp table.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Chen Hanxiao <chenhanxiao@gmail.com>
The only place where VIR_DOMAIN_EVENT_RESUMED should be generated is the
RESUME event handler to make sure we don't generate duplicate events or
state changes. In the worse case the duplicity can revert or cover
changes done by other event handlers.
For example, after QEMU sent RESUME, BLOCK_IO_ERROR, and STOP events
we could happily mark the domain as running and report
VIR_DOMAIN_EVENT_RESUMED to registered clients.
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks to the previous commit the RESUME event handler knows what reason
should be used when changing the domain state to VIR_DOMAIN_RUNNING, but
the emitted VIR_DOMAIN_EVENT_RESUMED event still uses a generic
VIR_DOMAIN_EVENT_RESUMED_UNPAUSED detail. Luckily, the event detail can
be easily deduced from the running reason, which saves us from having to
pass one more value to the handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Whenever we get the RESUME event from QEMU, we change the state of the
affected domain to VIR_DOMAIN_RUNNING with VIR_DOMAIN_RUNNING_UNPAUSED
reason. This is fine if the domain is resumed unexpectedly, but when we
sent "cont" to QEMU we usually have a better reason for the state
change. The better reason is used in qemuProcessStartCPUs which also
sets the domain state to running if qemuMonitorStartCPUs reports
success. Thus we may end up with two state updates in a row, but the
final reason is correct.
This patch is a preparation for dropping the state change done in
qemuMonitorStartCPUs for which we need to pass the actual running reason
to the RESUME event handler and use it there instead of
VIR_DOMAIN_RUNNING_UNPAUSED.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch replaces some rather generic VIR_DOMAIN_RUNNING_UNPAUSED
reasons when changing domain state to running with more specific ones.
All of them are done when libvirtd reconnects to an existing domain
after being restarted and sees an unfinished migration or save.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT was defined but not used anywhere
in our event generation code. This fixes qemuDomainRevertToSnapshot to
properly report why the domain was resumed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In a following case:
virsh start $domain
service libvirtd stop
<shutdown> the guest from within the $domain
service libvirtd start
Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:
libvirtd start
qemuProcessReconnect
qemuProcessStop (because $domain was shutdown without
libvirtd event to process that)
qemuHostdevReAttachDomainDevices
qemuHostdevReAttachPCIDevices
virHostdevReAttachPCIDevices
However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.
This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: Wu Zongyong <cordius.wu@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.
The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already prefer them in capabilities, and domcapabilities
should be consistent with that.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new implementation contains less duplicated code and
is easier to extend.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.
This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.
This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.
Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.
Doing so will also make further refactoring easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function performing the checks, rather than its callers,
should contain comments explaining the rationale behind said
checks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
