Commit Graph

613 Commits

Author SHA1 Message Date
Yi Li
ed3cc76b48 virsh-domain: Remove unused virshNodeIsSuperset
The function is marked as unused. Remove it from the tree
until a new use case can be found.
Unused since: 38cc07b7bc

Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-11-05 10:47:47 +01:00
zhenwei pi
b866adf8d9 libvirt: support memory failure event
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.

Several changes in this patch:
public API:
    include/*
    src/conf/*
    src/remote/*
    src/remote_protocol-structs

client:
    examples/c/misc/event-test.c
    tools/virsh-domain.c

With this patch, each driver could implement its own method to run
this new event.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-23 09:41:52 +02:00
Jonathon Jongsma
08f8fd8413 conf: Add support for vDPA network devices
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.

vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.

When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g.  /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2020-10-20 14:46:52 -04:00
Ján Tomko
504913bf23 virsh: use g_new0 instead of vsh[CM]alloc
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-10-06 09:01:46 +02:00
Peter Krempa
cb6fdb0125 virBitmapNew: Don't check return value
Remove return value check from all callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-10-05 15:38:47 +02:00
Ján Tomko
157b17f706 tools: use g_new0 instead of VIR_ALLOC*
With the exception of vsh*alloc.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 12:34:13 +02:00
Lin Ma
ea17253970 virsh: event: options --list, --all and --event are mutually exclusive
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-17 12:25:53 +02:00
Lin Ma
a9aac97fdb virsh: Add logical CPU list completion for --cpulist argument
Currently this patch works for the commands emulatorpin, iothreadpin and
vcpupin.

Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
b3198b95d6 virsh: Add vcpu list completion to setvcpu command
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
6c74a2e23a virsh: Add vcpu IDs completion to vcpupin command
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
ab4ef5de67 virsh: Add iothread IDs completion to iothread* commands
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
889bdba38d virsh: Add domain uuid completion to domname command
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
eddd9932ee virsh: Add event completer to --enable/--disable args of perf command
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
89193486dc virsh: managedsave-*: Only return domains that have a managed save image
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-14 15:52:40 +02:00
Lin Ma
b7b53c651a virsh: domdisplay: options --all and --type are mutually exclusive
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-09-12 12:49:31 +02:00
Yi Li
b1f10ed031 tools: virsh-domain: Remove redundant conditional before virshDomainFree
virshDomainFree handles NULL pointers gracefully, so there's no need to
check the pointer before the call.

Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-09-11 10:12:09 +02:00
Ján Tomko
3144e881b1 virsh: cmdScreenshot: fix cbdata passing to virshStreamSink
The changes for sparse stream support started passing
virshStreamCallbackDataPtr to virshStreamSink
instead of passing a simple file descriptor, but
forgot to adjust all the callers.

Fix it in cmdScreenshot as well.

https://bugzilla.redhat.com/show_bug.cgi?id=1875195

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 9e745a9717
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-09-09 14:37:19 +02:00
Martin Kletzander
49186372db qemu: Allow NBD migration over UNIX socket
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration.  And also adds virsh support.

Partially resolves: https://bugzilla.redhat.com/1638889

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2020-09-04 10:20:49 +02:00
Martin Kletzander
e31f24e299 virsh: Reuse existing variable when parsing migrate --disks-port
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2020-09-04 10:20:49 +02:00
Ján Tomko
0a37e0695b Split declarations from initializations
Split those initializations that depend on a statement
above them.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-08-25 19:03:11 +02:00
Ján Tomko
a5152f23e7 Move declarations before statements
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-08-25 19:03:11 +02:00
Tomáš Golembiovský
c7547a16f8 virsh: guest-agent-timeout: set default value for optional argument
The timeout argument for guest-agent-timeout is optional but it did not
have proper default value specified. Also update the virsh man page
accordingly.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-08-24 10:08:06 +02:00
Ján Tomko
ee247e1d3f Use g_strfeev instead of virStringFreeList
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-08-03 15:37:36 +02:00
Ján Tomko
24b2f96a41 tools: remove unnecessary includes
After the split of virsh to multiple files, and the subsequent
split to vsh/virt-admin, there are quite a few leftovers.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-08-03 15:30:40 +02:00
Ján Tomko
9c4730c54b tools: remove unread variables
Some of libvirt APIs return the number of elements, but we
don't need them, only whether the API failed or not.

Delete the redundant variables.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-08-03 15:19:29 +02:00
Laine Stump
ecc4ee2c42 tools: use g_auto() for all virBuffers
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-08 16:34:13 -04:00
Daniel Henrique Barboza
9d31433483 virsh-domain.c: modernize cmdVcpuinfo()
Use g_auto* pointers to avoid the need for the cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-08 19:39:35 +02:00
Daniel Henrique Barboza
a3a628f54c virsh-domain.c: modernize virshVcpuinfoInactive()
Use g_auto* in the string and in the bitmap. Remove the
cleanup label since it's now unneeded.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-08 19:39:31 +02:00
Peter Krempa
fc09f3d823 virsh: cmdBlock*: Remove 'error:' prefix for an empty line
When a block copy job fails prior to reaching the synchronized phase
while we are waiting for the job to finish virsh would print the
following:

 $ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
 error:
 Copy failed

The above message looks like we've forgot to print the error message
itself as the line ends after 'error:'. Unfortunately with the current
API design clients have no way of actually getting the error message as
the VIR_DOMAIN_EVENT_ID_BLOCK_JOB(_2) event only reports the status but
not an error and the job then vanishes.

Fix the expectations by using vshPrintExtra instead of vshError:

 $ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job

 Copy failed

Note that the newline is required to avoid printing the 'Copy failed'
message on the same line when printing the job progress percentage.

Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=1847867

Fix the same issue also for block pull and block commit job

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-22 17:22:03 +02:00
Han Han
f57a8cd3df virsh: Fix typo of metadata
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-22 09:40:56 +02:00
Michal Privoznik
d3a7479c0b Use more of VIR_XPATH_NODE_AUTORESTORE
This is convenience macro, use it more. This commit was generated
using the following spatch:

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ...
  - old = ctxt->node;
    ... when != old
  - ctxt->node = old;

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old = ctxt->node;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ... when != old
  - ctxt->node = old;

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-06-03 21:06:02 +02:00
Xu Yandong
5534e4e659 virsh: Fix return code for dump
After the commit dc0771c, ret variable no longer
represents the status of the return code, use
data->ret replace it.

Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-05-04 14:28:05 +02:00
Peter Krempa
4f39774610 API: Add VIR_DOMAIN_JOB_ERRMSG domain job statistics field
In some cases it's useful to report the error which caused the domain
job to fail. Add an optional field for holding the error message so that
it can be later retrieved from statistics of a completed job.

Add the field name macro and code for extracting it in virsh.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-24 08:56:57 +02:00
Andrea Bolognani
fbc4e81a36 virsh: Fix return code for dump and migrate
When the job monitoring logic was refactored, these two commands
were not converted properly and the result is that a successful
dump or migration (char '0') would be reported as a failed one
(int 48) instead.

Fixes: dc0771cfa2
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-04-22 09:30:56 +02:00
Peter Krempa
a33046f3c3 virsh: cmdUndefine: Properly extract delete-storage-volume-snapshots flag
Commit 86608f787e added the above flag as an alias for ambiguous
'delete-snapshots' flag, but forgot to actually change the code that
extracts it, thus the new version actually doesn't work.

https://bugzilla.redhat.com/show_bug.cgi?id=1821988

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-04-14 18:43:48 +02:00
Daniel P. Berrangé
8faf77baf7 tools: explain that '^' means 'Ctrl' for console escape sequence
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-03-30 16:48:38 +01:00
Peter Krempa
1a53b2baab cmdDomHostname: Fix uninitialized use of 'hostname' by refactoring cleanup
Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-03-05 16:21:47 +01:00
Ján Tomko
7e0d11be5b virsh: include virutil.h where used
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-02-24 23:15:50 +01:00
Peter Krempa
41345f6201 virsh: Allow extracting 'return' section of QMP command in 'qemu-monitor-command'
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.

This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-02-10 17:26:26 +01:00
Daniel P. Berrangé
dc0771cfa2 tools: rewrite interactive job monitoring logic
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.

The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.

No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:53 +00:00
zhenwei pi
26badd13e8 qemu: support Panic Crashloaded event handling
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.

Handle crashloaded as a lifecyle event in libvirt.

Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
   e0b9a42735f2672ca2764cfbea6e55a81098d5ba
   191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
  # echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
  # echo 1 > /proc/sys/kernel/sysrq
  # echo c > /proc/sysrq-trigger

Host side:
1, build new qemu with pvpanic patches (with commit from upstream
   600d7b47e8f5085919fd1d1157f25950ea8dbc11
   7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
  # virsh event stretch --event lifecycle
  event 'lifecycle' for domain stretch: Crashed Crashloaded
  events received: 1

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
2020-02-07 14:05:25 +00:00
Daniel P. Berrangé
cc46e137eb src: convert code to use virPipe APIs
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-04 14:00:44 +00:00
Ján Tomko
0a125c7144 virBufferTrim: do not accept len
Always trim the full specified suffix.

All of the callers outside of tests were passing either
strlen or the actual length of the string.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-02-03 19:44:38 +01:00
Ján Tomko
49882b3337 Add a space before ending a comment
Also add a space after the start in some of the cases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-01-30 12:32:03 +01:00
Daniel P. Berrangé
ff627b4726 rpc: conditionalize signal handling
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
3caa28dc50 src: replace gmtime_r/localtime_r/strftime with GDateTime
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.

There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is

  https://gitlab.gnome.org/GNOME/glib/issues/1999

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 10:02:01 +00:00
Daniel P. Berrangé
fa434739a0 src: replace verify(expr) with G_STATIC_ASSERT(expr)
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 10:02:01 +00:00
Julio Faracco
0f814c0fed virsh: Expose virDomainGetHostnameFlags
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-16 09:02:35 +01:00
Jiri Denemark
143b71a8ec virsh migrate: Require --tls for --tls-destination
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.

This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.

https://bugzilla.redhat.com/show_bug.cgi?id=1784345

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2020-01-10 09:12:57 +01:00
Daniel P. Berrangé
f5e9bdb87f src: replace clock_gettime()/gettimeofday() with g_get_real_time()
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00