This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The current internal domain events API tracks callbacks based on
the function pointer, and only supports lifecycle events. This
adds new internal APIs for registering callbacks for other event
types. These new APIs are postfixed with the word 'ID' to indicate
that they operated based on event ID, instead of hardcoded to
lifecycle events
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Add new APIs for handling callbacks
for non-lifecycle events
This symbol is conditional, it would need to be exported conditional to
work properly with MinGW. So just remove it, as no other driver register
function is listed in the symbols files.
Changeset
commit 5073aa994a
Author: Cole Robinson <crobinso@redhat.com>
Date: Mon Jan 11 11:40:46 2010 -0500
Added support for product/vendor based passthrough, but it only
worked at the security driver layer. The main guest XML config
was not updated with the resolved bus/device ID. When the QEMU
argv refactoring removed use of product/vendor, this then broke
launching guests.
THe solution is to move the product/vendor resolution up a layer
into the QEMU driver. So the first thing QEMU does is resolve
the product/vendor to a bus/device and updates the XML config
with this info. The rest of the code, including security drivers
and QEMU argv generated can now rely on bus/device always being
set.
* src/util/hostusb.c, src/util/hostusb.h: Split vendor/product
resolution code out of usbGetDevice and into usbFindDevice.
Add accessors for bus/device ID
* src/security/virt-aa-helper.c, src/security/security_selinux.c,
src/qemu/qemu_security_dac.c: Remove vendor/product from the
usbGetDevice() calls
* src/qemu/qemu_driver.c: Use usbFindDevice to resolve vendor/product
into a bus/device ID
This introduces a third option for clock offset synchronization,
that allows an arbitrary / variable adjustment to be set. In
essence the XML contains the time delta in seconds, relative to
UTC.
<clock offset='variable' adjustment='123465'/>
The difference from 'utc' mode, is that management apps should
track adjustments and preserve them at next reboot.
* docs/schemas/domain.rng: Schema for new clock mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
new clock time delta
* src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add
virXPathLongLong() method
The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
src/xen/xm_internal.c: Updated to use new structure for localtime
If the hostname as returned by "gethostname" resolves
to "localhost" (as it does with the broken Fedora-12
installer), then live migration will fail because the
source will try to migrate to itself. Detect this
situation up-front and abort the live migration before
we do any real work.
* src/util/util.h src/util/util.c: add a new virGetHostnameLocalhost
with an optional localhost check, and rewire virGetHostname() to use
it
* src/libvirt_private.syms: expose the new function
* src/qemu/qemu_driver.c: use it in qemudDomainMigratePrepare2()
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
Remove virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual,
which are defined but not used anywhere.
* src/conf/domain_conf.[ch] src/libvirt_private.syms: Remove
virDomainDevicePCIAddressEqual and virDomainDeviceDriveAddressEqual.
Ad pointed out by Dan Berrange:
So if some thread in libvirtd is currently executing a logging call,
while another thread calls virExec(), that other thread no longer
exists in the child, but its lock is never released. So when the
child then does virLogReset() it deadlocks.
The only way I see to address this, is for the parent process to call
virLogLock(), immediately before fork(), and then virLogUnlock()
afterwards in both parent & child. This will ensure that no other
thread
can be holding the lock across fork().
* src/util/logging.[ch] src/libvirt_private.syms: export virLogLock() and
virLogUnlock()
* src/util/util.c: lock just before forking and unlock just after - in
both parent and child.
The virDomainDeviceInfoIterate() function will provide a
convenient way to iterate over all devices in a domain.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDeviceInfoIterate()
function.
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
New pciDeviceIsAssignable() function for checking whether a given PCI
device can be assigned to a guest was added. Currently it only checks
for ACS being enabled on all PCIe switches between root and the PCI
device. In the future, it could be the right place to check whether a
device is unbound or bound to a stub driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'. These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.
The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.
The XML syntax is
<alias name="video0"/>
This may appear in any type of device that supports device info.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment
* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.
If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.
This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.
NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.
A future QEMU will allow proper SCSI hotunplug of a drive.
This patch is derived from work done by Wolfgang Mauerer on disk
controllers.
* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
the correct controller, instead of just attaching a new
controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for 'drive_add' command
This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.
This patch is derived from Wolfgang Mauerer's disk controller
patch series.
* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
new API for attaching PCI SCSI controllers
This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by
<controller type="scsi" index="<num>">
<address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
</controller>
where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.
Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series
* docs/schemas/domain.rng: Define syntax for <controller>
XML element
* src/conf/domain_conf.c, src/conf/domain_conf.h: Define
virDomainControllerDef struct, and routines for parsing
and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
and virDomainControllerDefFree
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
All other stateful drivers are linked directly to libvirtd
instead of libvirt.so. Link the secret driver to libvirtd too.
* daemon/Makefile.am: link the secret driver to libvirtd
* daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks
* src/Makefile.am: don't link the secret driver to libvirt.so
* src/libvirt_private.syms: remove the secretRegister symbol
Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.
When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.
For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:
virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)
Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.
Typical use by hypervisors which prefer CPUID (such as VMware and Xen):
- convert guest CPU configuration from domain's XML into a set of raw
data structures each representing one of the feature policies:
cpuEncode(conn, architecture, guest_cpu_config,
&forced_data, &required_data, &optional_data,
&disabled_data, &forbidden_data)
- create a mask or whatever the hypervisor expects to see and pass it
to the hypervisor
Typical use by hypervisors with symbolic model names (such as QEMU):
- get raw CPU data for a computed guest CPU:
cpuGuestData(conn, host_cpu, guest_cpu_config, &data)
- decode raw data into virCPUDefPtr with a possible restriction on
allowed model names:
cpuDecode(conn, guest, data, n_allowed_models, allowed_models)
- pass guest->model and guest->features to the hypervisor
* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
We don't use this method of reloading rules anymore, so we can just
kill the code.
This simplifies things a lot because we no longer need to keep a
table of the rules we've added.
* src/util/iptables.c: kill iptablesReloadRules()
Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.
There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.
We quickly disabled lokkit support, but never removed it. Let's do
that now.
The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:
https://bugzilla.redhat.com/227011
* src/util/iptables.c: remove lokkit support
* configure.in: remove --enable-lokkit
* libvirt.spec.in: remove the dirs used only for saving rules for lokkit
* src/Makefile.am: ditto
* src/libvirt_private.syms, src/network/bridge_driver.c,
src/util/iptables.h: remove references to iptablesSaveRules
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.
The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.
* src/conf/capabilities.h: Add callbacks for serializing private
state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
fields from virDomainObjPtr. Remove code that serialized
those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
char device config into qemuMonitorOpen directly.
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc). There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.
This uses the YAJL library for parsing/formatting from
http://lloyd.github.com/yajl/
* src/util/json.h, src/util/json.c: Data structures and APIs
for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
Some of the very useful calls for XML parsing provided by util/xml.[ch]
were not exported as private symbols. This patch fixes this.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
and virProcessInfoGetAffinity to internal drivers
* configure.in: add new --with-udev, disabled by default, and requiring
libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
of fields in node device definitions, and an API to look them up,
remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
virBuildPath and virBuildPathInternal() function
Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
with virDomainObjUnref
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
one use of the unimplemented function
* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
the ebtables binary
* src/libvirt_private.syms: export the symbols only internally
