Rather than using 'virsh define' for the tests use the XML (or idea what
the XML is testing) and use them as 'qemuxmlconftest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add domaincapstest qemuxml2argvtest qemuxml2xmltest
related test cases for loongarch.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The source tag sets the rootdir property of the device, which is
the directory exposed to the guest via the MTP device. The target
tag sets the desc property. This device supports read-only mode
as well. Like virtiofs, it does not support additional access
modes.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently all machine types which do honour '-usb' are already covered
by code which will either select a proper controller model or would
select the same one which '-usb' would use.
Thus all of the legacy -usb controller code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'virt*' machines already don't allow downgrade
- 'versatilepb' and 'realview' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb' (some have sysbus-based USB
controller which we don't even consider)
For the 'versatilepb' and 'realview' machines libvirt would already
resort to picking either an existing controller model or trying to pick
the one which '-usb' would select and thus fail either way.
All other machine types ignore it.
We can thus remove the fallback for all arm-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'pseries' machines already don't allow downgrade
- 'g3beige' and 'mac99' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb'
For 'g3beige' and 'mac99' libvirt already has 'pci-ohci' as contoller it
would select as one of the options when picking a model, thus it's
impossible to reach situation when '-usb' would be honoured.
All other machine types ignore it.
We can thus remove the fallback for all ppc-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The default USB device auto-selection code for 'pseries' machines picks
controller models which are also selected when '-usb' is used thus it's
impossible to end up in the case when using '-usb' would be possible:
$ qemu-system-ppc64 --machine pseries,usb=on
qemu-system-ppc64: could not find a module for type 'nec-usb-xhci'
$ qemu-system-ppc64 --machine pseries-2.5,usb=on
qemu-system-ppc64: could not find a module for type 'pci-ohci'
Remove the impossible downgrade and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- 'q35' machine type already explicitly forbids fallback
- 'isapc' never supported USB and '-usb' is ignored
- 'i440fx' does support '-usb' and translates it into 'piix3-uhci' which
is identical to what libvirt selects
- we currently don't care about 'microvm'
Attempting to start an 'pc' (i440fx) machine with -usb when 'piix3-uhci'
is compiled out will fail and in any other case libvirt will use the
proper explicitly selected controller.
Drop the '-usb' downgrade for x86 arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This controller is used as the default/implicit USB controller by
multiple machine types which honour the '-usb' flag of qemu. Add it as
fallback in libvirt too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The machine types historically have a default USB controller populated
via '-usb' which libvirt assumed implicitly. Qemu will use 'pci-ohci'
for both if '-usb' is used.
Unfortunately an USB controller instantiated via '-usb' is unusable as
the bus name libvirt generates doesn't reflect the real name qemu uses,
and thus no libvirt-defined USB devices can be put on the controller.
This patch will populate the default USB controller into the XML and
select it's model to 'pci-ohci' unconditionally as the machine would
fail to start with '-usb' if that controller model is not available.
This patch doesn't try to make any other assumptions about
auto-populated model of USB controllers, which means that for an
explicit USB controller without model a different model will be picked.
Note that this will likely cause ABI differences and break migration for
the two machine types, in the corner case when the default USB
controller would be populated, but given that both are obsolete board
types and USB was unusable it doesn't make sense to keep supporting this
specific case when '-usb' was formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Most machine types are avaliable in all arches by qemu. This is also
true for the 'versatilepb' machine type example in the tests.
Move all the ARM architectures together so that they are handled in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add an example using the old binary/machine type to also see how legacy
cases are handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Move the test invocation and rename the test files according to the
pattern.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'borzoi' machine doesn't honour '-usb' in qemu so use it as an
example for the upcoming patch for removing '-usb' support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test data for a 'realview' machine example to validate default USB
controller selection.
Note that it's unlikely that anyone would run 'realview' machines with
'aarch64' architecture, but qemu allows it and it's simpler test-wise in
libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This new test case checks whether we are handling NVDIMMs
correctly when checking for overlapping memory devices (see
previous commit). Without previous commit, this test case would
fail, yet it was produced in real life (at least the NVDIMM
part) and thus it is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The existing capabilities were generated against a build made
quite early in the QEMU 8.1.0 development cycle. Update them
to match the final release.
A notable effect of this is that the recently introduced
s390-usb-model test now passes instead of failing: QEMU 8.1.0
enables several new devices on s390x, including the qemu-xhci
USB controller.
There's a small amount of additional churn caused by the fact
that the machine on which I have generated these capabilities
is apparently slightly less fancy than the one used originally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Show what happens when trying to use a specific type of USB
controller. This currently fails because the QEMU binary doesn't
include the necessary device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These tests currently cover the scenarios in which the guest
can end up with no USB controller, one of which is specific
to s390x. We are going to add more USB on s390x scenarios, so
a different naming convention is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'raw' driver without any special configuration is not needed and
creates overhead in qemu.
Stop using the 'raw' format driver in cases when it's not needed. A
special case when it is needed is for FD passed images with only a
single writable FD passed, where we need an overlay driver to properly
reflect the 'read-only' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to 'v8.2.0-952-g14639717bf'.
Notable changes:
- 'backing-mask-protocol' feature added for block-commit and block-stream
- 'singlestep' mode dropped
- 'cmpccxadd' cpu feature became available
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "auto" SCSI controller model was introduced for use in the
ESX driver, but the QEMU driver doesn't reject the value.
Add a test case showing the behavior when such a configuration
is encountered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
These are similar to the minimal cases that we just introduced,
but are intended to demonstrate what device or controller model
libvirt will choose when one is not provided by the user.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have just added a number of test cases that supersede it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently have a single test case called "minimal", which
suffers from two big flaws:
* it's limited to the x86_64/pc machine type;
* it explicitly enables a number of devices.
Add several test cases, one for each of the architectures and
machine types that we have good support for.
Unlike the existing one, they're *really* minimal: no devices
or controllers at all are present in the input XML. So the new
test cases demonstrate exactly what devices and controller
libvirt will decide to add automatically.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This demonstrates that on aarch64, where a native panic device
doesn't exist, it's necessary for the user to specify the model
explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For q35 guests, we normally add a USB controller by default,
but there's a scenario in which we can decide to skip it. Add
test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have an explicit test case for the feature in
genericxml2xmltest, we can drop a bunch of duplicated accidental
coverage from qemuxmlconftest.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is pretty straightforward.
Resolves: https://issues.redhat.com/browse/RHEL-15316
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in v8.2.0-rc0~74^2~2, QEMU now allows setting
.dynamic-memslots attribute for virtio-mem-pci devices. When
turned on, it allows memory exposed to guest to be split into
multiple memslots and thus smaller memory footprint (see the
original commit for detailed explanation).
Therefore, introduce new <target/> attribute which will control
that QEMU knob.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a number of cases in which we want to test both the
normal behavior and the ABI_UPDATE behavior for the same input
XML.
The way this is currently implemented is ad-hoc, and involves
symlinking the input XML as well as coming up with an
alternative name for the ABI_UPDATE variant: in most cases the
-abi-update suffix is added, but since this is not enforced
there are a couple of cases where we do something else instead.
To make things simpler and more consistent, implement the
naming convention at the macro level. This way, we no longer
need to create any symlinks for the input file, and the output
files are automatically named correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The input file is a symlink for the ppc64-usb-controller input
file, so the output files are identical as well. It's just an
unnecessary duplicate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These values are currently unsupported for ssh disks, and in fact aren't
even parsed for ssh disks. So while this didn't result in any test
errors, we can remove them from the test input files.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Unify the output directory. Symlinks needed to be adapted to work
properly, but the 'qemuxml2argvdata' symlink can now be removed.
The virschematest exceptions needed to be moved to the proper directory
once the files are moved.
The unification of the output directory now also ensures that files
won't be forgotten once tests are removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unify the naming of the data directory with the test name.
'tests/qemuxml2argvdata' is for the time converted to a symlink to
'qemuxmlconfdata', to preserve the symlinks in
'tests/qemuxml2xmloutdata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
