Add the SVG files for the libvirt logo, along with corresponding
pre-rendered PNG bitmaps at key sizes. Also add a README file
describing how to modify the logos and their intended usages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The original libvirt logo was built using what appears to be
either Overpass font, or one stylistically very similar (the
slanted top of letters like 'l', 't', etc). The newly recreated
libvirt logo will use Overpass. Use this font for the website
text too, to provide a consistent style.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
Detect on reconnect to a running qemu VM whether the alias of a
hotpluggable memory device (dimm) does not match the dimm slot number
where it's connected to. This is necessary as qemu is actually
considering the alias as machine ABI used to connect the backend object
to the dimm device.
This will require us to keep them consistent so that we can reliably
restore them on migration. In some situations it was currently possible
to create a mismatched configuration and qemu would refuse to restore
the migration stream.
To avoid breaking existing VMs we'll need to keep the old algorithm
though.
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
Since we no longer support building on RHEL-5, we can
drop the non-pkg-config based check for parted.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We dropped support for RHEL-5 vintage Xen a while ago,
but forgot to remove some of the hacks for it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1386976
We have everything ready. Actually the only limitation was our
check that denied hotplug of vhost-user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared. The original patch forgot to add that parameter.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
../../src/qemu/qemu_capabilities.c:3757: error: declaration of
'basename' shadows a global declaration [-Wshadow]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Function qemuDomainAttachShmemDevice() steals the device data if the
hotplug was successful, but the condition checked for unsuccessful
execution otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This helps in selecting log level of the gluster gfapi, output to stderr.
The option is 'gluster_debug_level', can be tuned by editing
'/etc/libvirt/qemu.conf'
Debug levels ranges 0-9, with 9 being the most verbose, and 0
representing no debugging output. The default is the same as it was
before, which is a level of 4. The current logging levels defined in
the gluster gfapi are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Note that as a gicv3 machine was not available the schema data is taken
from the gicv2 case. It should be identical since qemu would be built
from the same source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.
This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.
The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.
Remove the command from the supported commands list temporarily so that
QMP introspection code can be added without breaking tests and having to
tweak the test data in the same commit.
This will be later reverted and test data will be added. The aarch64
code is special as it calls additional commands and thus the test data
can't be added upfront.
Some operations like reboot, save, coreDump, blockStats,
ifaceStats make sense iff domain is running. While it is
technically possible for our test driver to return success
regardless of domain state, we should copy constraints from
other drivers and thus deny these operations over inactive
domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379196
Add check in qemuCheckDiskConfig for an invalid combination
of using the 'scsi' bus for a block 'lun' device and any disk
source format other than 'raw'.
Fixes the behavior when destroying a domain more than once.
VIR_ERR_OPERATION_INVALID should be raised when destroying an
already destroyed domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Release tarballs ship the include/libvirt/libvirt-common.h.
when srcdir != builddir we end up including libvirt-common.h twice: from
$top_srcdir/include/libvirt-common.h and from
$builddir/include/libvirt-common.h leading to
function virTypedParamsGetUInt from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h
function virTypedParamsAddBoolean from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h
…
Only add the builddir to the search list if there is no pregenerated
libvirt-common.h.
Reuse the existing check that predates the libvirt.h → libvirt-common.h
split and that probably was meant for exactly that.
References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=842452
Commit e8861f6971 changed our spec file to compile and run
tests in parallel. That's a very good step forward, but why
stop there? Let's run *all* make jobs in parallel and really
put those expensive cores to use!
On my laptop, this shaves ~10s off 'make rpm'.
${exec_prefix} and ${prefix} point to the same directory in
most setups, but when that's not the case the former should
be used for architecture-dependent data such as shared objects,
which makes it the best fit for our Wireshark dissector.
While at it, change all uses of $(var) to ${var}: they are
absolutely identicaly as far as make's concerned, but autoconf
itself seems to prefer the latter form so we might as well
follow suit.
We only need to strip $ws_prefix from $ws_plugindir if we've
retrieved it from pkg-config: if we're building it ourselves
from $libdir, we can just use it without further processing.
Commit c29e6d4805 cause build failure on RHEL-6:
../../src/qemu/qemu_capabilities.c: In function 'virQEMUCapsIsValid':
../../src/qemu/qemu_capabilities.c:4085: error: declaration of 'ctime'
shadows a global declaration [-Wshadow]
/usr/include/time.h:258: error: shadowed declaration is here [-Wshadow]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's keep all run time validation of cached QEMU capabilities in
virQEMUCapsIsValid and call it whenever we access the cache.
virQEMUCapsInitCached should keep only the checks which do not make
sense once the cache is loaded in memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virQEMUCapsLoadCache loads QEMU capabilities from a file, but strangely
enough it returns the loaded QEMU binary ctime in qemuctime parameter
instead of storing it in qemuCaps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This fixes a build issue with old gnutls.
Broken by commit 680d2f49da.
Reported-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far, the main code is built in parallel, which makes it pretty
fast. But with a lots of tests we have now I've noticed this part
takes too much time to build. The problem was that tests were
build and run in a single job.
Also, 'make' in the first hunk is useless. The test suite is not
built due to 'make all' because there's no .git in the sources
unpacked from a tar.xz archive. It's 'make check' which triggers
tests build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
