Patch adds a generic DO_TEST_FULL macro, some PASS/FAIL macros to better
visually distinguish tests that should fail and tests that should pass. Also,
some cosmetic changes like renames and direct call to fprintf is replaced with
our VIR_TEST_DEBUG macro, as using testutils should be our preferred way of
reporting errors in tests.
Since servers know their name, there is no need to supply such
information twice. Also defeats inconsistencies.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier. On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU (somewhere around 2.0) added a new sub-option to the -name flag
-name debug-threads=on.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'actualCount' variable, formerly just 'count', is only used
internally by the macro, so it's better to move its declaration
inside the macro as well: this way, it doesn't have to be declared
by every single user.
The new name is less generic to make clashes less likely.
When checking the number of devices added to a device list, use the
nhostdevs variable instead of its value, so that the test can keep
working even if more hostdevs are added.
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:
"error: authentication failed: no agent is available to authenticate"
This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:
"error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'"
A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:
"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."
but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.
After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
There's been a report on the upstream list [1] describing we
access /sys/devices/system/cpu/present directly on the host from
within our test suite. This may end up in unpredictable results
as no all linux systems are required to have that file. Mock
access to the file.
libvirt.git/tests $ ../run strace vircgrouptest
...
access("/sys/devices/system/cpu/present", F_OK) = 0
...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Yet again, selinux has been adding const-correctness; this change
is ABI-compatible, but breaks API, which affects us when we try to
override things in our testsuite:
../../tests/securityselinuxhelper.c:307:24: error: conflicting types for 'selabel_open'
struct selabel_handle *selabel_open(unsigned int backend,
^~~~~~~~~~~~
In file included from ../../tests/securityselinuxhelper.c:32:0:
/usr/include/selinux/label.h:73:24: note: previous declaration of 'selabel_open' was here
The problem is a new 'const' prior to the second parameter.
Fix it the same way we did in commit 292d3f2d: check for the new
const at configure time.
Signed-off-by: Eric Blake <eblake@redhat.com>
The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='pool/image'>
<host name='mon1.example.org' port='6321'/>
<host name='mon2.example.org' port='6322'/>
<host name='mon3.example.org' port='6322'/>
</source>
<target dev='hdb' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
can be converted to the following xl config (and vice versa)
disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
]
Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.
Also add a test for the conversions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.
format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc
Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see $xen-src/docs/misc/xl-disk-configuration.txt
Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
Since commit 51045df01b, the QEMU_CAPS_DEVICE capability is enabled
automatically and shouldn't be passed as an argument to DO_TEST();
however, commit 998a936c4c accidentally introduced few such uses.
This was only used for test 'xml blanking', which has now all
been removed, and isn't an ideal paradigm anyways since it
inhibits easy XML regeneration.
The memory XML blanking is only there to avoid the unit= churn that
was added by default a long time ago.
Drop the blanking, switch over to using the standard comparison
helpers, and regenerate the output with VIR_TEST_REGENERATE_OUTPUT.
If a qemuargv has iscsi or ceph secrets on the command line, we will
convert that to XML like:
<auth username='myname'>
<secret type='iscsi'/>
</auth>
This is not valid XML, as either a UUID or usage must be specified in
the secret block. It's not clear though how the argv2xml code can do
anything correct here, since XML like this requires a libvirt secret
object to have already been defined.
The current test suite handles this by blanking out any <secret> block
in the XML. This avoids domainschematest failures.
Instead of blanking, let's hardcode a usage= name. This lets us test
the other bits of generated <secret> XML, and is a step towards wiring
up VIR_TEST_REGENERATE_OUTPUT
Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.
Unify the naming to prepare for new test cases that will be added
later on.
Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.
Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.
After the rework of mocking of our tests there's the
virportallocator test failing to link on mingw. Well, it's the
mocking library actually:
../gnulib/lib/.libs/libgnu.a(bind.o): In function `rpl_bind':
/home/jenkins/libvirt-mingw/build32/gnulib/lib/../../../gnulib/lib/bind.c:33: multiple definition of `rpl_bind'
.libs/virportallocatormock_la-virportallocatormock.o:/home/jenkins/libvirt-mingw/build32/tests/../../tests/virportallocatormock.c:79: first defined here
I've no idea why this matters to mingw and does not to others.
Nevertheless, if we make the test linux only the problem goes
away.
Apparently, our test for RTLD_NEXT is not sufficient because
mingw32 defines it. Lets put aside for a while fact that it has
the same value as RTLD_DEFAULT which by description has different
meaning, shall we?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
