Leap 15.1 will reach EOL on January 31st 2021, so we should not test on
it during the current development cycle ending on March 1st.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In this refresh CentOS 7 now uses docker.io registry and the PowerTools
repo name regression was fixed for CentOS Stream this time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In this refresh the PIP variable is renamed to PIP3 and the
PYPI_PKGS variable disappears since we (currently) don't have
any need for it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "libvirt-" prefix was removed from hostnames in libvirt-ci.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Contains changes utilizing "nosync" and "eatmydata" for speedup as well
as fixes for CentOS-8 repoid regression.
ci-commit: b098ec6631a85880f818f2dd25c437d509e53680
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This makes the dockerfile name match the output container name
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces Fedora 33 and removes some redundant packages.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's no need to have different CI process between macOS and FreeBSD
as test suite has been fixed on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add meson required bits to the ci logic in the repo to be able to run
a meson build in a container.
This patch also drops several environment variables we don't need with
meson anymore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce new job to make a coverity build and upload coverity data to
scan.coverity.com where the analysis is then executed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The corresponding lcitool change is
00d736ea99
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous 11.3 image provided by Cirrus did not boot, but they have
now provided a working 11.4 image
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The corresponding libvirt-ci commit is:
commit 512b1011559165e3f37eae675dd43a431b95baa3
projects: install clang on Linux
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The Cirrus CI integration was modeled after the Travis CI jobs,
but those were limited to macOS where the test suite is currently
still broken. FreeBSD can run the full distcheck just fine, so
let's do that.
Fixes: 6190c14151
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The corresponding libvirt-ci commit is 5abf5e7e2326.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All targets get cpanm, which is now part of the base system, and
xz is now installed explicitly instead of relying on it being either
present by default or dragged in indirectly.
The corresponding libvirt-ci commit is 8920e8f408ba.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Instead of having static job definitions for FreeBSD and macOS,
use a generic template for both and fill in the details that are
actually different, such as the list of packages to install, in
the GitLab CI job, right before calling cirrus-run.
The target-specific information are provided by lcitool, so that
keeping them up to date is just a matter of running the refresh
script when necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All targets get pip3, which is now part of the base system, and
the number of native packages included in the MinGW containers is
significantly reduced.
The corresponding libvirt-ci commit is 4ff697ba0b5d.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The build job for this container has been failing every single
time, and as it turns out the explanation for that is very simple:
Debian is just not going to support the mips architecture going
forward.
Reported-by: Pino Toscano <ptoscano@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Document the CI_MAKE_ARGS and CI_CONFIGURE_ARGS so that users don't have
to skim through the Makefile to be able to pass arbitrary recognized
make targets to the build system.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ci-* targets need to know where our container images are stored
and how they are called to work, so now that we use the GitLab
container registry instead of Quay some changes are necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using pre-built containers hosted on Quay, build
containers as part of the GitLab CI pipeline and upload them to the
GitLab container registry for later use.
This will not significantly slow down builds, because containers are
only rebuilt when the corresponding Dockerfile has been modified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We use cirrus-run to trigger Cirrus CI jobs from GitLab CI jobs,
making it possible to extend our platform coverage to include
FreeBSD without having to maintain our own runners; additionally,
we'll be able to ditch Travis CI and, since results for Cirrus CI
jobs are reflected back to the GitLab CI jobs that triggered them,
we will be able to get all information from a single dashboard.
The FreeBSD and macOS job definitions can be improved further: for
example, we will want to enable caching to speed up builds, and
ultimately we should figure out a way to generate at least part of
them, notably the list of packages to be installed, using lcitool.
All of that will happen in later patches: for now, this is good
enough to start using Cirrus CI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As of libvirt-jenkins-ci commit e41e341f0d8f, we no longer bake
this environment variable into our container images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two environment variables that are baked into our
cross-compilation container images at build time, $CONFIGURE_OPTS
and $PKG_CONFIG_LIBDIR: the former contain the options necessary
to convince configure to perform a cross build rather than a
native one, and the latter is necessary so that pkg-config will
locate the .pc files for MinGW libraries. Container images that
are not intended for cross-compilation will not have either one
defined.
The problem is that, while an empty $CONFIGURE_OPTS is completely
harmless, setting $PKG_CONFIG_LIBDIR to an emtpy value will
result in pkg-config not looking in its default search path, thus
not finding any library, and subsequently breaking native builds.
To work around this issue, only pass $PKG_CONFIG_LIBDIR to sudo
when the value is set in the calling environment.
Fixes: 71517ae4db
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For container images targeted at cross-building, we bake a small
amount of architecture-specific information in the environment so
that builds can work as expected without requiring additional work
from the user; unfortunately this information got lost as soon as
we called sudo. Explicitly allow it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Any static list of images is destined to become outdated eventually,
so let's start generating it dynamically instead.
Unfortunately there doesn't seem to be a straightforward way to get
Podman/Docker to list all repositories under quay.io/libvirt, so we
have to resort to searching and filtering manually; and since the
two tools behave slightly differently in that regard, it's more
sane to have the logic in a separate shell script than it would be
to keep it inline in the Makefile with all the annoying escaping
doing so would entail.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that we're using sudo, the initial work directory is no
longer relevant since the user will find themselves in their
home directory when they get control anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order for the prepare script to be really useful, it needs
to be able to perform privileged operations such as installing
additional packages or setting up custom mount points.
In order to achieve that, we now run the container as root,
run the prepare script with full privilege, and only then
switch to the unprivileged account with sudo.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This script is run before $(CI_BUILD_SCRIPT) and can be used
to tweak the environment as necessary before the build starts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both for ci-build and ci-shell we want to execute basically
the same setup and cleanup logic, the only difference being
that for the former we then run the build script and with the
latter a shell.
Rework the targets so that they both call the generic
ci-run-command rule passing an appropriate $(CI_COMMAND).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of hardcoding build instructions into the Makefile,
move them to a separate script that's mounted into the
container.
This gives us a couple of advantages: we no longer have to
deal with the awkward quoting required when embedding shell
code in a Makefile, and we also provide the users with a way
to override the default build instructions with their own.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a home directory for the user, storing the
source there rather than in a custom top-level directory is
the obvious choice.
Later on we're also going to add some more files related to
builds, and storing everything in the user's home directory
will keep things nice and tidy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some applications expect the user's home directory to be
present on the system and require workarounds when that's not
the case. Creating the home directory along with everything
else is easy enough for us, so let's just do that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to have a few more CI-related files in a second, and
it makes sense to have a separate directory for them rather than
littering the root directory.
$(CI_SCRATCHDIR) can now also be created inside the CI directory,
and as a bonus the make rune necessary to start CI builds without
running configure first becomes shorter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
