Commit Graph

577 Commits

Author SHA1 Message Date
Roman Bogorodskiy
0257d06ba4 storage: ZFS support
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>
2014-08-12 19:40:20 +04:00
Peter Krempa
37183e5db8 lib: Introduce flag VIR_DOMAIN_BLOCK_REBASE_RELATIVE
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
2014-07-08 11:51:06 +02:00
Peter Krempa
bda44ca2ca lib: Introduce flag VIR_DOMAIN_BLOCK_COMMIT_RELATIVE
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
2014-07-08 11:45:04 +02:00
Michal Privoznik
f409df4de1 Introduce virConnectGetDomainCapabilities
The API should expose the information contained in virDomainCapsPtr.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-03 12:22:37 +02:00
Peter Krempa
02bffd47bd net: merge virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
2014-06-27 09:38:13 +02:00
Jiri Denemark
80d0918bd2 virConnectCompareCPU: Introduce FAIL_INCOMPATIBLE flag
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-06-26 00:44:02 +02:00
Jiri Denemark
b14954fc12 cpuCompare*: Add support for reporting failure on incompatible CPUs
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.

To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-06-26 00:43:54 +02:00
Jiri Denemark
c3d94f79d2 Remove redundant docs from libvirt.h
Only types and macros are documented in libvirt.h, APIs are documented
in the *.c file they are implemented in.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-06-26 00:43:45 +02:00
Daniel P. Berrange
6512c8b456 Change 'interface' to 'iface' in virNetworkDHCPLease
Variables/fields named 'interface' clash with system
header symbols on some platforms.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-24 13:30:16 +01:00
Nehal J Wani
03e0e79e07 net-dhcp-leases: Implement the public APIs
Introduce 3 new APIs, virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC
and virNetworkDHCPLeaseFree.

* virNetworkGetDHCPLeases: returns the dhcp leases information for a given
     virtual network.

  For DHCPv4, the information returned:
  - Network Interface Name
  - Expiry Time
  - MAC address
  - IAID (NULL)
  - IPv4 address (with type and prefix)
  - Hostname (can be NULL)
  - Client ID (can be NULL)

  For DHCPv6, the information returned:
  - Network Interface Name
  - Expiry Time
  - MAC address
  - IAID (can be NULL, only in rare cases)
  - IPv6 address (with type and prefix)
  - Hostname (can be NULL)
  - Client DUID

  Note: @mac, @iaid, @ipaddr, @clientid are in ASCII form, not raw bytes.
  Note: @expirytime can 0, in case the lease is for infinite time.

* virNetworkGetDHCPLeasesForMAC: returns the dhcp leases information for a
     given virtual network and specified MAC Address.

* virNetworkDHCPLeaseFree: allows the upper layer application to free the
     network interface object conveniently.

There is no support for flags, so user is expected to pass 0 for
both the APIs.

include/libvirt/libvirt.h.in:
  * Define virNetworkGetDHCPLeases
  * Define virNetworkGetDHCPLeasesForMAC
  * Define virNetworkDHCPLeaseFree

src/driver.h:
  * Define networkGetDHCPLeases
  * Define networkGetDHCPLeasesForMAC

src/libvirt.c:
  * Implement virNetworkGetDHCPLeases
  * Implement virNetworkGetDHCPLeasesForMAC
  * Implement virNetworkDHCPLeaseFree

src/libvirt_public.syms:
  * Export the new symbols
2014-06-24 12:26:31 +01:00
Michal Privoznik
34f2d0319d Introduce virNodeGetFreePages
The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-19 15:10:49 +02:00
Eric Blake
1bfe73a126 blockjob: use stable disk string in job event
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-19 06:54:12 -06:00
Eric Blake
cfe087a211 blockjob: avoid compiler uncertainty in info sizing
We have a policy of avoiding enum types in structs in our public
API, because it is possible for a client to choose compiler options
that can change the in-memory ABI of that struct based on whether
the enum value occupies an int or a minimal size.  But we missed
this for virDomainBlockJobInfo.  We got lucky on little-endian
machines - if the enum fits minimal size (a char), we still end
up padding to the next long before the next field; but on
big-endian, a client interpreting the enum as a char would always
see 0 when the server supplies contents as an int.

* include/libvirt/libvirt.h.in (virDomainBlockJobInfo): Enforce
particular sizing.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-16 11:13:35 -06:00
Eric Blake
3de3294de1 blockjob: document recent job addition
I noticed that the web page lacked documentation on block jobs:
http://libvirt.org/html/libvirt-libvirt.html#virDomainBlockJobType
not only for the recently added active commit, but also for all
the other job types.

* include/libvirt/libvirt.h.in (virDomainBlockJobType): Document
recent addition.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-16 11:11:45 -06:00
Eric Blake
b298025063 blockcommit: document semantics of committing active layer
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.

Stepping back a bit, there are two valid semantics for a
commit operation:

1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.

2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.

Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job.  However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.

This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics.  It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML.  Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-06-10 11:11:16 -06:00
Michal Privoznik
0abb369380 Introduce virDomain{Get,Set}Time APIs
These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-05-15 16:15:54 +02:00
Tomoki Sekiyama
208f002c9d Introduce virDomainFSFreeze() and virDomainFSThaw() public API
These will freeze and thaw filesystems within guest specified by
@mountpoints parameters. The parameters can be NULL and 0, then all
mounted filesystems are frozen or thawed. @flags parameter, which are
currently not used, is for future extensions.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-06 17:41:58 -06:00
Jim Fehlig
b98bf81151 Introduce a new flag for controlling shutdown/reboot
Add a new flag to virDomain{Reboot,Shutdown}FlagValues to allow
shutting down and rebooting a domain via the Xen paravirt control
interface.
2014-05-05 10:52:21 -06:00
Daniel P. Berrange
3a0ca7de51 Introduce an object for managing firewall rulesets
The network and nwfilter drivers both have a need to update
firewall rules. The currently share no code for interacting
with iptables / firewalld. The nwfilter driver is fairly
tied to the concept of creating shell scripts to execute
which makes it very hard to port to talk to firewalld via
DBus APIs.

This patch introduces a virFirewallPtr object which is able
to represent a complete sequence of rule changes, with the
ability to have multiple transactional checkpoints with
rollbacks. By formally separating the definition of the rules
to be applied from the mechanism used to apply them, it is
also possible to write a firewall engine that uses firewalld
DBus APIs natively instead of via the slow firewalld-cmd.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 15:44:09 +01:00
Hongwei Bi
b2ed4f68b4 util: fix a typo in virprocess.c and docs
s/forcably/forcibly

Signed-off-by: Hongwei Bi <hwbi2008@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-27 06:58:46 -06:00
Qiao Nuohan
9fbaff008c add new virDomainCoreDumpWithFormat API
--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.

Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-24 14:14:11 -06:00
Chegu Vinod
05e1b06ab7 libvirt support to force convergence of live guest migration
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.

Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.

This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)

Signed-off-by:  Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-03-21 14:17:15 +01:00
Eric Blake
43b17dd444 qemu: allow filtering events by regex
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go.  Implement a flag to use regex
interpretation of the event filter.

While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)

* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-20 11:25:37 -06:00
Eric Blake
2629520342 qemu: new API for tracking arbitrary monitor events
Several times in the past, qemu has implemented a new event,
but libvirt has not yet caught up to reporting that event to
the user applications.  While it is possible to track libvirt
logs to see that an unknown event was received and ignored,
it would be nicer to copy what 'virsh qemu-monitor-command'
does, and expose this information to the end developer as
one of our unsupported qemu-specific commands.

If you find yourself needing to use this API for more than
just development purposes, please ask on the libvirt list
for a supported counterpart event to be added in libvirt.so.

While the supported virConnectDomainEventRegisterAny() API
takes an id which determines the signature of the callback,
this version takes a string filter and always uses the same
signature.  Furthermore, I chose to expose this as a new API
instead of trying to add a new eventID at the top level, in
part because the generic option lacks event name filtering,
and in part because the normal domain event namespace should
not be polluted by a qemu-only event.  I also added a flags
argument; unused for now, but we might decide to use it to
allow a user to request event names by glob or regex instead
of literal match.

This API intentionally requires full write access (while
normal event registration is allowed on read-only clients);
this is in part due to the fact that it should only be used
by debugging situations, and in part because the design of
per-event filtering in later patches ended up allowing for
duplicate registrations that could potentially be abused to
exhaust server memory - requiring write privileges means
that such abuse will not serve as a denial of service attack
against users with higher privileges.

* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventCallback)
(virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New prototypes.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New functions.
* src/libvirt_qemu.syms (LIBVIRT_QEMU_1.2.1): Export them.
* src/driver.h (virDrvConnectDomainQemuMonitorEventRegister)
(virDrvConnectDomainQemuMonitorEventDeregister): New callbacks.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-20 11:25:37 -06:00
Daniel P. Berrange
3a7fe8d508 Add helper APIs for generating cryptographic hashes
GNULIB provides APIs for calculating md5 and sha256 hashes,
but these APIs only return you raw byte arrays. Most users
in libvirt want the hash in printable string format. Add
some helper APIs in util/vircrypto.{c,h} for doing this.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-10 16:39:18 +00:00
Roman Bogorodskiy
0eb4a5f4f1 bhyve: add a basic driver
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:

  * define
  * start
  * destroy
  * dumpxml
  * dominfo

It's only possible to have only one disk device and only one
network, which should be of type bridge.
2014-02-19 14:21:50 +00:00
Roman Bogorodskiy
3b00df01fb BSD: implement nodeGetCPUStats
Implementation obtains CPU usage information using
kern.cp_time and kern.cp_times sysctl(8)s and reports
CPU utilization.
2014-02-06 14:09:15 +01:00
John Ferlan
46a0737e13 Block info query: Add check for transient domain
Currently the qemuDomainGetBlockInfo will return allocation == physical
for most backing stores. For a qcow2 block backed device it's possible
to return the highest lv extent allocated from qemu for an active guest.
That is a value where allocation != physical and one would hope be less.
However, if the guest is not running, then the code falls back to returning
allocation == physical. This turns out to be problematic for rhev which
monitors the size of the backing store. During a migration, before the
VM has been started on the target and while it is deemed inactive on the
source, there's a small window of time where the allocation is returned
as physical triggering the code to extend the file unnecessarily.

Since rhev uses transient domains and this is edge condition for a transient
domain, rather than returning good status and allocation == physical when
this "window of opportunity" exists, this patch will check for a transient
(or non persistent) domain and return a failure to the caller rather than
returning the defaults. For a persistent domain, the defaults will be
returned. The description for the virDomainGetBlockInfo has been updated
to describe the phenomena.
2014-01-24 11:37:18 -05:00
Claudio Bley
2a27d6a4f2 docs: refer to the correct event ID for DomainEventIOErrorReasonCallback
s/_ID_IO_ERROR/_ID_IO_ERROR_REASON/
2014-01-22 10:37:14 +01:00
Gao feng
8bbf1133ce virsh: add setting throttle blkio cgroup option to blkiotune
With this patch, user can setup the throttle blkio cgorup
for domain through the virsh cmd, such as:

virsh blkiotune domain1 --device-read-bytes-sec /dev/sda1,1000000,/dev/sda2,2000000
--device-write-bytes-sec /dev/sda1,1000000 --device-read-iops-sec /dev/sda1,10000
--device-write-iops-sec /dev/sda1,10000,/dev/sda2,0

This patch also add manpage for these new options.

Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2014-01-20 10:52:47 +08:00
Claudio Bley
e8eb8d8497 Fix docs for PMWakeup/PMSuspend callback types
s/is waken up/is woken up/

A registered PMSuspendCallback is called when the domain is suspended, not
when it is woken up.
2014-01-15 17:00:18 +01:00
Eric Blake
3e67714e48 docs: improve event-related documentation
While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist.  Also fix some
typos and poor formatting.

* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-19 09:45:50 -07:00
Peter Krempa
b560946c19 storage: Add gluster pool filter and fix virsh pool listing
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.

This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
2013-12-19 11:01:50 +01:00
Cédric Bosdonnat
9ff38c5428 Added Network events API and virNetworkEventLifecycle.
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.

The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
2013-12-11 13:10:41 +00:00
Chen Hanxiao
fb2125902f docs: fix a typo in libvirt.h
s/pausde/paused

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-12-11 13:36:35 +01:00
Eric Blake
99f7b63568 docs: fix typo in previous patch
Avoid a nested comment compilation error, caused by me editing
Chen's patch.

* include/libvirt/libvirt.h.in: Fix typo.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-02 11:27:37 -07:00
Chen Hanxiao
c268af2e9a docs: fix typos in libvirt.h.in
s/causes/cause/

Each event callback has a single detail parameter, and can
thus only report a single cause.  Also, make all the sub-event
documentation use similar wording.

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-02 10:11:11 -07:00
Chen Hanxiao
d3572bb7b4 docs: fix typos in libvirt.h.in
s/caused/causes

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-12-02 10:50:27 +08:00
Eric Blake
ecd881b7a7 storage: add network-dir as new storage volume type
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory.  But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch.  Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).

* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 12:29:49 -07:00
Doug Goldstein
6ce83e91e6 Macro for testing the version you are compiling with
Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can
simply do something like:

 #if LIBVIR_CHECK_VERSION(1,1,3)
   /* Call function here that appeared in 1.1.3 and newer */
   virSomeNewFunction();
 #endif
2013-11-18 11:53:18 -06:00
Eric Blake
6385283add docs: improve job info details
Noticed while revieweing the patches for qemu's new migration state.

* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-15 06:00:49 -07:00
Chen Hanxiao
0a85160f26 docs: fix typos in libvirt.h.in
s/repersents/represents

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-11-11 08:28:46 -07:00
Eric Blake
d0b2d0177b docs: grammar fixes
Fix some user-visible wording from commits 72aafe9 and 1606d89.

* src/qemu/qemu.conf (migration_address): Better wording.
* include/libvirt/libvirt.h.in (VIR_MIGRATE_PARAM_LISTEN_ADDRESS):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-08 10:37:06 -07:00
Eric Blake
a5da542360 maint: avoid 'const fooPtr' in public API
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up offenders in the public API.  Note that this is an API change;
but see commit 6ac6f59, where we first argued that this change is
harmless (but with that commit not actually making the change that it
claimed to be making):

    Although this is an API change (not ABI though), real callers won't be
    impacted. Why?
     1. these callback members are read-only, so it is less likely that
    someone is trying to assign into the struct members.
     2. The only way to register a virConnectDomainEventGraphicsCallback is
    to cast it through a call to virConnectDomainEventRegisterAny.  That is,
    even if the user's callback function leaves out the const, we never use
    the typedef as the direct type of any API parameter.  Since they are
    already casting their function pointer into a munged type before
    registering it, their code will continue to compile.

* include/libvirt/libvirt.h.in
(virConnectDomainEventGraphicsCallback): Use intended type.
2013-10-14 10:56:20 -06:00
Michal Privoznik
72aafe9c81 Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:51:36 +02:00
Michal Privoznik
4b744d7d00 virerror: s/VIR_ERR_STORAGE_VOL_EXISTS/VIR_ERR_STORAGE_VOL_EXISTS/
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-07 19:21:47 +02:00
Hongwei Bi
91875896d5 fix a ambiguous output of the command:'virsh vol-create-as'
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
 error: Storage volume not found: storage vol 'test' already exists"

I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
 error: storage volume 'test' exists already"
2013-10-07 18:26:09 +02:00
Giuseppe Scrivano
f90857b32a libvirt: add new public API virConnectGetCPUModelNames
The new function virConnectGetCPUModelNames allows to retrieve the list
of CPU models known by the hypervisor for a specific architecture.

Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-23 15:41:50 -06:00
Jonathan Lebon
b8e4644d1a docs: fix virEventAddHandle return details
In commit 6d41cb8, the interface for virEventAddHandleFunc was changed.
This patch updates the documentation for virEventAddHandle to reflect
the new significance of the return value. Also, both functions now
mention -1 for failure.
2013-09-18 13:06:13 -06:00
Don Dugger
d4952d36d0 Add flag to BaselineCPU API to return detailed CPU features
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model.  This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.

Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-16 15:31:18 -06:00