Copy the declaration into the smallest blocks it's used in
and mark it as VIR_AUTOFREE.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Most code paths prevent starting a blockjob if we already have one but
the job registering function does not do this check. While this isn't a
problem for regular cases we had a bad test case where we registered two
jobs for a single disk which leaked one of the jobs. Prevent this in the
registering function until we allow having multiple jobs per disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemuDomainAttachNetDevice() (hotplug) previously had some of the
validation that is in qemuDomainValidateActualNetDef(), but it was
incomplete. qemuDomainChangeNet() had none of that validation, but it
is all appropriate in both cases.
This is the final piece of a previously partial resolution to
https://bugzilla.redhat.com/1502754
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fixes bug in
commit bbe2aa627f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jul 26 17:24:30 2018 +0100
conf: simplify link from hostdev back to network device
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
which mistakenly deleted the assignment to the 'net' variable,
which meant we never invoked the network driver release callback
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have qemuFirmwareGetSupported() so that it also
returns a list of FW image paths, we can use it to report them in
domain capabilities instead of the old time default list.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1733940
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemuFirmwareGetSupported() function is called from qemu
driver to generate domain capabilities XML based on FW descriptor
files. However, the function currently reports only some features
from domcapabilities XML and not actual FW image paths. The paths
reported in the domcapabilities XML are still from pre-FW
descriptor era and therefore the XML might be a bit confusing.
For instance, it may say that secure boot is supported but
secboot enabled FW is not in the listed FW image paths.
To resolve this problem, change qemuFirmwareGetSupported() so
that it also returns a list of FW images (we have the list
anyway). Luckily, we already have a structure to represent a FW
image - virFirmware.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1733940
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This function is going to get some new arguments. Document the
current ones for clarity.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The snapshot-create operation of running guests saves the live
XML and uses it to replace the active and inactive domain in
case of revert. So, the config XML is ignored by the snapshot
process. This commit changes it and adds the config XML in the
snapshot XML as the <inactiveDomain> entry.
In case of offline guest, the behavior remains the same and the
config XML is saved in the snapshot XML as <domain> entry. The
behavior of older snapshots of running guests, that don't have
the new <inactiveDomain>, remains the same too. The revert, in
this case, overrides both active and inactive domain with the
<domain> entry. So, the <inactiveDomain> in the snapshot XML is
not required to snapshot work, but it's useful to preserve the
config XML of running guests.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Once we copy the domain definition from virDomainSnapshotDef, we either
need to assign it to the domain object or free it to avoid memory leaks.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit f10562799 introduced a regression: if reverting to a snapshot
fails early (such as when we refuse to revert to an external
snapshot), we lose track of the domain's current snapshot.
Before that patch, we were tracking the notion of the domain's current
snapshot via two means: vm->current_snapshot (which was left untouched
on early exit) and snap->def->current (which only controls what gets
written to XML to remember snapshots across libvirtd restarts). That
patch was fixing a real bug: if a revert operation failed early, later
questions from the same libvirtd did not see any change to the current
snapsthot, but restarting libvirtd would now claim there is no current
snapshot. But it fixed it in the wrong direction, in that the current
snapshot was forgotten unconditionally, rather than only when the
snapshot to revert to has a chance of being useful.
It didn't help that the code after that patch had two separate spots
clearing the old notion of the current snapshot - one after
determining the snapshot to revert to was viable, the other
unconditionally on all failure exit paths. At any rate, the fix is
simple: drop the unconditional cleanup on error paths, and rely only
on the normal cleanup after early checks.
Sadly, it is not possible to test this bug in the existing
tests/virsh-snapshot, as the test driver does not have the same
prohibition against reverting to an external snapshot as the qemu
driver.
See: https://bugzilla.redhat.com/1738747
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190909205242.15406-1-eblake@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two 'cleanup' labels - one in
virQEMUDriverConfigHugeTLBFSInit() and the other in
virQEMUDriverConfigSetDefaults() that do nothing more than
return and integer value. No memory freeing or anything important
is done there. Drop them in favour of returning immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Our naming rules prefer qemuObjectOperation() scheme rather than
qemuOperationObject() for function names. These were not honoured
in recent commits to qemu_conf.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Traditionally, macvtap devices are supported using <interface
type='direct'>, but that type requires specifying a source device name
and macvtap mode which can't be altered after the initial device
creation (and may not even be available to the management software
that's creating the XML config to feed to libvirt).
But the attributes in the <source> are essentially describing how the
device will be connected to the network, and if libvirt is to be
supplied with the name of a macvtap device that has already been
created, that device will also already be connected to the network
(and the connection can't be changed). Thus it seems more appropriate
to use type='ethernet', which was created explicitly for this purpose
- for devices that have already been (or will be) connected to the
external network by someone/something outside of libvirt. The fact
that it is a *macv*tap rather than a contentional tap device is just a
detail.
This patch supports using an existing macvtap device with <interface
type='ethernet'> by checking the supplied target dev name to see if it
is a macvtap device and, when this is the case, calling
virNetDevMacVLanTapOpen() instead of virNetDevTapCreate(). For
consistency, this is only done when target managed='no'.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This just moves around a few things in qemuInterfaceConnect() with no
functional difference (except that a few failures that would have
previously resulted in a "success" audit log will now properly produce
a "fail" audit). The change is so that adding support for unmanaged
tap/macvtap devices will be more easily reviewable.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a domain, we use the presence of a vfio-pci or
mdev hostdev to determine if the memlock maximum needs to be
increased. But if we hotplug either of these devices, only the
vfio-pci path gets that love. This means that attaching a, say,
vfio-ccw device will appear to succeed but the device may be
unusable as the guest may see I/O errors on long CCW chains.
The host, meanwhile, would be flooded with these messages:
vfio_pin_page_external: Task qemu-system-s39 (11584) RLIMIT_MEMLOCK (65536) exceeded
Let's adjust the maximum memlock value in the mdev hotplug path,
so that the domain has the same value as if it were started with
one or more mdev devices in its configuration.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If attaching a PCI hostdev fails, there are several things that
need to be un-done as part of the cleanup. One thing that is
not done is re-calculating/re-setting the maximum amount of locked
memory for the domain, since we may have changed that.
Let's fix that, just to ensure everything is back the way it was.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After the previous commits, qemuAddSharedDevice() and
qemuRemoveSharedDevice() are now the same code with a different
flag to call the internal functions.
This patch aggregates the common code into a new function called
qemuAddRemoveSharedDeviceInternal() to further reduce
code repetition. Both qemuAddSharedDevice() and
qemuRemoveSharedDevice() are kept since they are public
functions used elsewhere.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Following the same idea of avoid code repetition from the
previous patch, this commit introduces a new function that
aggregates the functions of qemuAddSharedDisk() and
qemuRemoveSharedDisk() into a single place, using a flag to
switch between add/remove operations.
Both qemuAddSharedDisk() and qemuRemoveSharedDisk() are
public, so keep them around to avoid changing other files
due to an internal qemu_conf.c refactory.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuAddSharedHostdev() has a code similar to
qemuRemoveSharedHostdev(), with exception of one line that
defines the operation (add or remove).
This patch introduces a new function that aggregates the common
code, using a flag to switch between the operations, avoiding
code repetition.
No functional change was made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since commit fd9ef3b31e, virDomainFindByUUIDRef() no longer exists and
all virDomainObjListFindBy*() functions now increment the reference
count.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
- qemuProcessReconnectAll()
- libxlReconnectDomains()
The rest seem to be safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the network interface is of "user" type, and QEMU has the "-net
socket,fd=" datagram support, call qemuInterfacePrepareSlirp() to
probe and associate a slirp-helper with the interface.
The usage of automated slirp-helper can be prevented with
disableSlirp (in particular when resuming a
VM that didn't start with slirp-helper before).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a slirp-helper is associated with a network interface (after
probing & preparing succesfully), pass the socket fd to QEMU and use
"-net socket,fd=".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a slirp-helper is associated with a network interface,
prepare/start/stop the process via qemu-extdevice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For VM started and migrated/saved without slirp-helpers, let's prevent
the automatic setup (as it would fail to migrate otherwise).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save & restore the slirp helper PID associated with a network
interface & the probed features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The unit provides the functions associated with a slirp-helper:
- probing / checking capabilities
- opening the socketpair
- starting / stoping the helper
- registering for dbus-vmstate migration
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A slirp helper is a process that provides user-mode networking through
a unix domain socket. It is expected to follow the following
specification:
https://gitlab.freedesktop.org/slirp/libslirp-rs/blob/master/src/bin/README.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dbusVMStates to keep a list of dbus-vmstate objects needed for
migration. They are populated on the command line during start or
qemuDBusVMStateAdd/Remove() will hotplug them as needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a generic way to run a command through the security management.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pid filenames (from swtpm and other helpers from this series) are
based on VM shortname, which is derived from VM id. If the id is reset
to early, the state filenames will not be found.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This object is being proposed to qemu upstream "Add dbus-vmstate
object". It handles data migration of external processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
