The helper uses the user-provided auth callbacks to ask the user. The
helper encapsulates the steps we do to query the user in few places into
a common helper which can be then used further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper will be used in various places that need to check that a disk
source struct is using FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For FD-passing of disk sources we'll need to keep the FDs around.
Introduce a data type helper based on a g_object so that we get
reference counting.
One instance will (due to security labelling) will need to be part of
the virStorageSource struct thus it's declared in the storage_source_conf
module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Looks up disk storage source within storage source chain using storage
source object instead of path to make it work with all disk types.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that all code was refactored to use the new version we can remove
the old code.
For now the new close callbacks code has no error messages so
syntax-check forced me to remove the POTFILES entry for
virclosecallbacks.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new APIs store the list of callbacks for a VM inside the
virDomainObj and also allow registering multiple callbacks for a single
domain and also for multiple connections.
For now this code is dormant until each driver using the old APIs is not
refactored to use the new APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new connect close callbacks for domains will be represented by a
virObject associated with the domain object itself.
To simplify handling the pointer to the close callback data will be done
by an immutable pointer allocated directly when allocating the
corresponding virDomainObj struct.
This patch adds the 'closecallbacks' field to virDomainObj and a
corresponding callback to allocate it into virDomainXMLOption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a helper which will return a list of all domain objects inside
of the list without filtering and thus without the need to lock
individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now unused. Remove it to dissuade anybody from trying to
use it in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a simple helper fetching a sub-element node by name. This is
meant as a simple replacement for either open-coded versions of this or
use of XPath for this trivial lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virJSONValueArrayToStringList which does only the conversion
from an array to a stringlist.
This will allow refactoring the callers to be more careful in case when
they want to handle the existance of the member in the parent object
differently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the now-unused functions for parsing 'unsigned long' values via
XPath.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now unused and we no longer want to promote use of the
'long' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to remove the 'Long' variants of XPath number fetching
functions we need a way to replace the hex number parsing capability.
The new helpers are created from the originals by adding a 'base'
argument and keeping the original function as a wrapper to pass 10.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now referenced only within util/virxml.c other callers
should not use it directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two modes of core scheduling that are handy wrt
virCommand:
1) create new trusted group when executing a virCommand
2) place freshly executed virCommand into the trusted group of
another process.
Therefore, implement these two new operations as new APIs:
virCommandSetRunAlone() and virCommandSetRunAmong(),
respectively.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since its 5.14 release the Linux kernel allows userspace to
define trusted groups of processes/threads that can run on
sibling Hyper Threads (HT) at the same time. This is to mitigate
side channel attacks like L1TF or MDS. If there are no tasks to
fully utilize all HTs, then a HT will idle instead of running a
task from another (un-)trusted group.
On low level, this is implemented by cookies (effectively an UL
value): processes in the same trusted group share the same cookie
and cookie is unique to the group. There are four basic
operations:
1) PR_SCHED_CORE_GET -- get cookie of given PID,
2) PR_SCHED_CORE_CREATE -- create a new unique cookie for PID,
3) PR_SCHED_CORE_SHARE_TO -- push cookie of the caller onto
another PID,
4) PR_SCHED_CORE_SHARE_FROM -- pull cookie of another PID into
the caller.
Since a system where the code is built can be different to the
one where the code is ran let's provide declaration of some
values. It's not unusual for distros to ship older linux-headers
than the actual kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far QEMU driver does not get CPU model vendor from QEMU directly and
it has to ask the CPU driver for the info stored in CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainObjParseFile is the only caller of virDomainObjParseNode.
The code can be merged into it, simplified by using virXMLParse and
the function removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers can be easily converted to call virNetworkDefParseXML
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was not used. Remove it and merge virInterfaceDefParse
into virInterfaceDefParseString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virInterfaceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virNodeDeviceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNWFilterDefParseString/File with the common function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename virDomainBackupDefParse to virDomainBackupDefParseXML and use
it in place of virDomainBackupDefParseNode. This is possible as
virXMLParse can be used to replace XPath context allocation and root
node checking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virSecretDefParseFile/String shims by calls to
virSecretDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virStorageVolDefParseFile/String shim functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Proper use of virXMLParse replaces everything the function provides.
Callers can use virStorageVolDefParseXML instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virStoragePoolDefParseString/File thin wrappers by
virStoragePoolDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace it by proper use of virXMLParse to validate the root node and
allocate the context. The use in the test driver can be directly
replaced by virStoragePoolDefParseXML as both are validated.
The change to the storage driver isn't trivial though as it requires
careful xpath context juggling to parse the nested volumes properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the two helpers virNetworkPortDefParseString/File with the
common helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is exported but used only intenally, additionally
everything it did for the only caller can be replaced by properly using
virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virNWFilterBindingDefParseString/File thin wrappers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fetch the XPath context and validate the node by using virXMLParse's
features.
This allows to completely remove virNWFilterBindingDefParseNode as
all callers now properly validate the root element name and have a XPath
context handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the redundant root node checking and XPath context creation by
using virXMLParse properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper for parsing long long values from XML properties with
semantics like virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to virXMLPropString it extracts a string but reports an error
similar to the newer virXMLProp helpers if the attribute is not present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function extracts a UUID with semantics similar to other
helpers we have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>