This new private API should return true iff sources of two disks
differs in sense that qemu should be instructed to change the
disk backend. For instance, ejecting a CDROM is such case, or
pointing disk into a different ISO location, and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While we currently only allow changing a media in a disk, this is
going to change in a while, so the function name would be
invalid. Moreover, the old name does not match the pattern laid
out by other update functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1159219
So, in 11e058ca58 I've tried to make UpdateDevice update
startupPolicy too. And it worked well until somebody came around
and pushed d0dc6c0369 which accidentally removed my
contribution. Redo my commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When persistently migrating a domain to a destination host where the
same domain already exists (i.e., it is persistent and shutdown at the
destination), we would happily throw away the original persistent
definition without properly freeing it. And when updating the definition
fails for some reason we don't properly revert to the original state
leaving the domain broken.
In addition to fixing these issues, the patch also makes sure the domain
definition parsed from a migration cookie is either used or freed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For quite a long time we don't need to postpone queueing events until
the end of the function since we no longer have the big driver lock.
Let's make the code of qemuMigrationFinish simpler by queuing events at
the time we generate them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Every single call to qemuDomainEventQueue() uses the following pattern:
if (event)
qemuDomainEventQueue(driver, event);
Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Finish is the final state in v2 of our migration protocol. If something
fails, we have no option to abort the migration and resume the original
domain. Non fatal errors (such as failure to start guest CPUs or make
the domain persistent) has to be treated as success. Keeping the domain
running while reporting the failure was just asking for trouble.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Whenever something fails during incoming migration in Finish phase
before we started guest CPUs, we need to kill the domain in addition to
reporting the failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When we save status XML at the point during migration where we have
already started the domain on destination, we can't really go back and
abort migration. Thus the only thing we can do is to log a warning and
report success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Offline migration is quite special because we don't really need to do
anything but make the domain persistent. Let's do it separately from
normal migration to avoid cluttering the code with
!(flags & VIR_MIGRATE_OFFLINE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.
Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
When looking for a QEMU binary suitable for running ppc64le guests
we have to take into account the fact that we use the QEMU target
as key for the hash, so direct comparison is not good enough.
Factor out the logic from virQEMUCapsFindBinaryForArch() to a new
virQEMUCapsFindTarget() function and use that both when looking
for QEMU binaries available on the system and when looking up
QEMU capabilities later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260753
Fixes the following error when attempting to add a disk with bus='virtio'
to a machine which actually supports virtio-mmio (caught with ARM virt):
virtio disk cannot have an address of type 'virtio-mmio'
The problem has been likely introduced by
e8d5517254. Before that
qemuAssignDevicePCISlots() was never called for ARM "virt" machine.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 8125113c added code that should remove the disk backend if the
fronted hotplug failed for any reason. The code had a bug though as it
used the disk string for unplug rather than the backend alias. Fix the
code by pre-creating an alias string and using it instead of the disk
string. In cases where qemu does not support QEMU_CAPS_DEVICE, we ignore
the unplug of the backend since we can't really create an alias in that
case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1262399
There's a couple reports of things failing in this area (bug 1259070),
but it's tough to tell what's going wrong without stderr from
qemu-bridge-helper. So let's report stderr in the error message
Couple new examples:
virbr0 is inactive:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device
bridge isn't on the ACL:
internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=br0 --fd=21: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=access denied by acl file
Up until now, the default has been rtl8139, but no check was in
place to make sure that device was actually available.
Now we try rtl8139, e1000 and virtio-net in turn, checking for
availability before using any of them: this means we have a much
better chance for the guest to be able to boot.
Commit f1f68ca334 did not report an error if virFileMakePath()
returned -1. Well, who would've guessed function with name starting
with 'vir' sets an errno instead of reporting an error the libvirt way.
Anyway, let's fix it, so the output changes from:
$ virsh start arm
error: Failed to start domain arm
error: An error occurred, but the cause is unknown
to:
$ virsh start arm
error: Failed to start domain arm
error: Cannot create directory '/var/lib/libvirt/qemu/domain-arm': Not
a directory
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the current live definition does not have memory hotplug enabled, but
the persistent one does libvirt would reject migration if the
destination does not support memory hotplug even if the user didn't want
to persist the VM at the destination and thus the XML containing the
memory hotplug definition would not be used. To fix this corner case the
code will check for memory hotplug in the newDef only if
VIR_MIGRATE_PERSIST_DEST was used.
Commit id '2e7cea243' added a check for an error from Finish instead
of 'unexpected error'; however, if for some reason there wasn't an
error, then virGetLastError could return NULL resulting in the
NULL pointer deref to err->domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1258361
When attaching a disk, controller, or rng using an address type ccw
or s390, we need to ensure the support is provided by both the machine.os
and the emulator capabilities (corollary to unconditional setting when
address was not provided for the correct machine.os and emulator.
For an inactive guest, an addition followed by a start would cause the
startup to fail after qemu_command builds the command line and attempts
to start the guest. For an active guest, libvirtd would crash.
Rather than have different usages of STR function in order to determine
whether the domain is s390-ccw or s390-ccw-virtio, make a single API
which will check the machine.os prefix. Then use the function.
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 1ce7c1d20c,
which introduced a significant semantic change to the
virDomainGetInfo() API. Additionally, the change was only
made to 2 of the 15 virt drivers.
Conflicts:
src/qemu/qemu_driver.c
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3
If the qemu monitor fails to remove the memory from the guest for
any reason, the auditlog message will incorrectly use the current
actual memory (via virDomainDefGetMemoryActual) instead of the
value we were attempting to reduce to. The result is the 'new-mem'
and 'old-mem' values for the auditlog message would be identical.
This patch creates a local 'newmem' which accounts for the current
memory size minus the memory which is being removed. NB, for the
success case this results in the same value that would be returned
by virDomainDefGetMemoryActual without the need to do the math. This
follows the existing code which would subtract the size for cur_balloon.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1226234#c3
Prior to this patch, after successfully hot plugging memory
the audit log indicated that the update failed, e.g.:
type=VIRT_RESOURCE ... old-mem=1024000 new-mem=1548288 \
exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=pts/2 res=failed
This patch will adjust where virDomainAuditMemory is called to
ensure the proper 'ret' value is used based on success or failure.
Additionally, the audit message should include the size of the
memory we were attempting to change to rather than the current
actual size. On failure to add, the message showed the same value
for old-mem and new-mem.
In order to do this, introduce a 'newmem' local which will compute
the new size based on the oldmem size plus the size of memory we
are about to add. NB: This would be the same as calling the
virDomainDefGetMemoryActual again on success, but avoids the
overhead of recalculating. Plus cur_balloon is already adjusted
by the same value, so this follows that.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit f1f68ca334 overused mdir_name()
event though it was not needed in the latest version, hence labelling
directory one level up in the tree and not the one it should.
If anyone with SElinux managed to try run a domain with guest agent set
up, it's highly possible that they will need to run 'restorecon -F
/var/lib/libvirt/qemu/channel/target' to fix what was done.
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1253107
Make a call virCgroupGetBlkioWeight to re-read blkio.weight right
after it is set in order to keep internal data up-to-date.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit aa2cc7 modified a previously unnecessary but innocuous check
for interface IP address during interface update incorrectly, causing
all attempted updates (e.g. changing link state) to interfaces of
type='ethernet' for QEMU to fail.
This patch fixes the issue by completely removing the check for IP
address, which is pointless since QEMU doesn't support setting
interface IP addresses from the domain interface XML anyway.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
We will try to set the node to cpuset.mems without check if
it is available, since we already have helper to check this.
Call virNumaNodesetIsAvailable to check if node is available,
then try to change it in the cgroup.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.). The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The problem here is that there are some values that kernel accepts, but
does not set them, for example 18446744073709551615 which acts the same
way as zero. Let's do the same thing we do with other tuning options
and re-read them right after they are set in order to keep our internal
structures up-to-date.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165580
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1251886
Since iothread_id == 0 is an invalid value for QEMU let's point
that out specifically. For the IOThreadDel code, the failure would
have ended up being a failure to find the IOThread ID; however, for
the IOThreadAdd code - an IOThread 0 was added and that isn't good.
It seems during many reviews/edits to the code the check for
iothread_id = 0 being invalid was lost - it could have originally
been in the API code, but requested to be moved - I cannot remember.
Just like in commit 704cf06, if virCgroup*() fails, the error is
already reported. There's no need to overwrite the error with a
generic one and possibly hiding the true root cause of the error.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
It may happen that user (mistakenly) wants to rename a domain to
itself. Which is no renaming at all. We should reject that with
some meaningful error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complained that 'vm' wasn't initialized before jumping to
cleanup: and calling virDomainObjEndAPI if the VIR_STRDUP fails.
So I initialized vm = NULL and also moved the VIR_STRDUP closer to
usage and used endjob for goto. Lots of other reasons for failures.
Currently supports only renaming inactive domains without snapshots.
Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Otherwise the error is just
error: Failed to create domain from test1.xml
error: failed to retrieve file descriptor for interface: Transport endpoint is not connected
since we don't get a sensible error after the fork.
Pinning information returned for emulatorpin and vcpupin calls is being
returned from our data without querying cgroups for some time. However,
not all the data were utilized. When automatic placement is used the
information is not returned for the calls mentioned above. Since the
numad hint in private data is properly saved/restored, we can safely use
it to return true information.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1162947
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The numad hint stored in priv->autoNodeset is information that gets lost
during daemon restart. And because we would like to use that
information in the future, we also need to save it in the status XML.
For the sake of tests, we need to initialize nnumaCell_max to some
value, so that the restoration doesn't fail in our test suite. There is
no need to fill in the actual numa cell data since the recalculating
function virCapabilitiesGetCpusForNodemask() will not fail, it will just
skip filling the data in the bitmap which we don't use in tests anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When parsing private domain data, there are two paths that are flawed.
They are both error paths, just from different parts of the function.
One of them can call free() on an uninitialized pointer. Initialization
to NULL is enough here. The other one is a bit trickier to explain, but
as easy as the first one to fix. We create capabilities, parse them and
then assign them into the private data pointer inside the domain object.
If, however, we get to fail from now on, the error path calls unrefs the
capabilities and then, when the domain object is being cleaned,
qemuDomainObjPrivateFree() tries to unref them as well. That causes a
segfault. Settin the pointer to NULL upon successful addition to the
private data is enough.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
