CPU signatures in the cpu_map serve as a hint for CPUID to CPU model
matching algorithm. If the CPU signatures matches any CPU model in the
cpu_map, this model will be the preferred one.
This works out well and solved several mismatches, but in real world
CPUs which should match a single CPU model may be produced with several
different signatures. For example, low voltage Broadwell CPUs for
laptops and Broadwell CPUs for servers differ in CPU model numbers while
we should detect them all as Broadwell CPU model.
This patch adds support for storing several signatures for a single CPU
model to make this hint useful for more CPUs. Later commits will provide
additional signatures for existing CPU models, which will correct some
results in our CPU test suite.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for storing several CPU signatures in a single CPU model,
we need to turn virCPUx86Model's signature into an array of signatures.
The parser still hardcodes the number of signatures to 1, but the
following patch will drop this limit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a helper for copying CPU signature between two CPU models.
It's not very useful until the way we store signatures is changed in the
next patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Having multiple CPU model definitions with the same name could result in
unexpected behavior.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseFeatures function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseVendor function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseSignature function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseAncestor function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests/cputestdata/cpu-parse.sh would produce JSON files with QEMU
replies which wouldn't pass syntax-check. Let's fix this by not emitting
an extra new line after reformatting the JSON file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commits e2087c2 and ec0793de older GCC started act very smart and
complain about potentially uninitialized variable, which existed prior
to these patches + even if the affected vars were left uninitialized the
function responsible for filling them in would have failed with NULL
being returned which the caller has always handled carefully.
Although GCC complained only about a single variable, let's initialize
all of them so as to prevent any further potential breakages.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rewrite the code to make usage of some VIR_AUTOFREE logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOFREE there's quite a bit of clean up
possible for now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for VIR_FREE consumers.
In some cases adding or removing blank lines for readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for VIR_AUTOFREE usage, let's remove a couple
of unused variables so that clang compilations won't fail.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOPTR(virBitmap) there's a couple of methods
that we can clean up some now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for virBitmapPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for using auto free mechanism, change to using the
VIR_STEAL_PTR on @def to @ret and of course be sure to properly clean
up @def in cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new helper when moving around the current node of the XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
