Rather than specialcasing handling of the '*' character, use fnmatch()
to get normal shell wildcard syntax, as described in 'man glob(7)'.
To get an indication of the performance impact of using globs instead
of plain string matches, a test program was written. The list of all
260 log categories was extracted from the source. Then a typical log
filters setup was picked by creating an array of the strings "qemu",
"security", "util", "cgroup", "event", "object". Every filter string
was matched against every log category. Timing information showed that
using strstr() this took 8 microseconds, while fnmatch() took 114
microseconds.
IOW, fnmatch is 14 times slower than our existing strstr check. These
numbers show a worst case scenario that will never be hit, because it
is rare that every log category would have data output. The log category
matches are cached, so each category is only checked once no matter how
many log statements are emitted. IOW despite being slower, this will
be lost in the noise and have no consequence on real world logging
performance.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's this macro virBufferSetChildIndent which sets offset of
child buffer from given parent buffer. However, it is calling
virBufferAdjustIndent() which only adds adjustment instead of
calling virBufferSetIndent() which clears out any adjustment
previously set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After version 0.7.5, libssh deprecated the function scope
ssh_get_publickey() and moved to ssh_get_server_publickey(). So, Libvirt
is failing to compile using this new function name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This commit adds some checks inside libssh m4 checking to verify if
ssh_get_server_publickey is available. This new function scope replaces
the old ssh_get_publickey() from libssh 0.7.5 and below. Assuming that
some distros are not showing the right version of libssh. This is a
simple way to check which function is available.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If we are the last one to use pr-manager object we need to remove
it and also kill the qemu-pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When attaching a disk that requires pr-manager we might need to
plug the pr-manager object and start the pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Before we exec() qemu we have to spawn pr-helper processes for
all managed reservations (well, technically there can only one).
The only caveat there is that we should place the process into
the same namespace and cgroup as qemu (so that it shares the same
view of the system). But we can do that only after we've forked.
That means calling the setup function between fork() and exec().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like we allow users overriding path to bridge-helper
detected at compile time we can allow them to override path to
qemu-pr-helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like in previous commit, qemu-pr-helper might want to open
/dev/mapper/control under certain circumstances. Therefore we
have to allow it in cgroups.
The change virdevmapper.c might look spurious but it isn't. After
6dd84f6850 any path that we're allowing in deivces CGroup is
subject to virDevMapperGetTargets() inspection. And libdevmapper
returns ENXIO for the path from subject.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If qemu-pr-helper is compiled with multipath support the first
thing it does is open /dev/mapper/control. Since we're going
to be running it inside qemu namespace we need to create it
there. Unfortunately, we don't know if it was compiled with or
without multipath so we have to create it anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability tracks if qemu has pr-manager-helper object. At
this time don't actually detect if qemu has the capability. Not
just yet. Only after the code is written the feature will be
enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Couple of reasons for that:
a) there's no monitor command to change path where the pr-helper
connects to, or
b) there's no monitor command to introduce a new pr-helper for a
disk that already exists.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently the VSH_OT_ARGV options don't support complete, But some of
VSH_OT_ARGV options are gonna support complete in upcoming patches.
Once applied the upcoming completion patches for VSH_OT_ARGV options, If
we don't ignore VSH_OT_ARGV here, The vshReadlineOptionsGenerator will
be called, Hence complete output will consist of the result by command
completer + the result by option completer, It's confusing.
e.g.
$ virsh domstats --domain <TAB><TAB>
--backing --interface --list-paused --perf --vcpu
--balloon leap42.3 --list-persistent --raw win10
--block --list-active --list-running sles12sp3
--cpu-total --list-inactive --list-shutoff sles15
--enforce --list-other --list-transient --state
After this patch and the upcoming completion patches:
$ virsh domstats --domain <TAB><TAB>
leap42.3 sles12sp3 sles15 win10
Signed-off-by: Lin Ma <lma@suse.com>
It's helpful for users while they type certain kind of VSH_OT_ARGV options.
e.g.
$ virsh domstats --domain sles12sp3 --d<TAB>
Signed-off-by: Lin Ma <lma@suse.com>
The first entry in the returned array is the substitution for TEXT. It
causes unnecessary output if other commands or options share the same
prefix, e.g.
$ virsh des<TAB><TAB>
des desc destroy
or
$ virsh domblklist --d<TAB><TAB>
--d --details --domain
This patch fixes the above issue.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new helper when checking that the VM needs to be tainted as a
host-cdrom passthrough.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
It's only required on el5 which we don't support anymore. Everywhere
else it's not used for anything useful
https://fedoraproject.org/wiki/RPMGroups
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
Last one was EL5 which is EOL for a while.
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
It was needed last for EL5 which is EOL now
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make sure that 'host_device' is generated for type='block'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test cases would correspond to the following -drive command lines:
file-backing_basic-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap,detect-zeroes=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-ignore.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=ignore,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
iscsi and rbd support authentication of the connection. Combine it with
encryption of qcow2.
The top level disk image would generate the following '-drive' cmdline:
-drive file=rbd:rbdpool/rbdimg:id=testuser-rbd:auth_supported=cephx\;none:
mon_host=host1.example.com\;host2.example.com,
file.password-secret=node-a-s-secalias,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,
if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add tests for backing chain handling, including a very long chain which
is fully specified in the XML and an unterminated chain.
The top level disk image would generate the following '-drive':
file-qcow2-backing-chain-encryption.xml:
-drive file=/var/lib/libvirt/images/a,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-noopts.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-unterminated.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Apart from adding test data add a function which sets up fake secrets
for the test.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/path/luks.img,key-secret=test1-encalias,format=luks,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test that the 'aio' option is applied correctly for the 'file' protocol
backend and across the backing chain.
The top level disk image would generate the following '-drive' cmdline:
file-backing_basic-aio_threads:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,aio=threads
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-raw-aio_native:
-drive file=/path/to/i.img,format=raw,if=none,id=drive-dummy,cache=none,aio=native
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test mapping of the 'FAT' disk format to 'vvfat' in qemu.
The top level disk image would generate the following '-drive' cmdline:
dir-fat-readonly.xml:
-drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
dir-fat-floppy.xml
-drive file=fat:floppy:/var/somefiles,if=none,id=drive-dummy,readonly=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Formats supporting backing chain such as qed, vmdk, don't have any other
parameters than the backing store and 'qcow' has only encryption params
which will be tested extra. Add this test case so they are covered since
any further test cases will mainly care about 'qcow2' and 'raw'.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/a,format=qed,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to the 'raw' case add tests for bochs, cloop, dmg, ploop, vdi
vhd, and vpc. Covering all supported non-backing formats.
Note that the JSON name for 'ploop' maps to 'parallels' and 'vhd' maps
to 'vhdx'.
Files added here would result in the followint configs:
file-bochs-noopts.xml:
-drive file=/path/to/i.img,format=bochs,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-cloop-noopts.xml:
-drive file=/path/to/i.img,format=cloop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-dmg-noopts.xml:
-drive file=/path/to/i.img,format=dmg,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-ploop-noopts.xml:
-drive file=/path/to/i.img,format=ploop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vdi-noopts.xml:
-drive file=/path/to/i.img,format=vdi,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vhd-noopts.xml:
-drive file=/path/to/i.img,format=vhd,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vpc-noopts.xml:
-drive file=/path/to/i.img,format=vpc,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test the JSON props generator with a very simple 'raw' image with no
other options. The node-names for the image are 31 bytes long so that we
validate our node name detector.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/i.img,format=raw,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test infrastructure that will allow testing the JSON object
generator used for generating data to use with blockdev-add.
The resulting disk including the backing chain is validated to conform
to the QAPI schema and the expected output files.
The first test cases make sure that libvirt will not allow nodenames
exceeding 31 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The function will be reused in the test code where we don't care much
that the gluster debug level can't be populated from the qemu config.
Set the level only when 'cfg' is passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
