They were added in qemu commit 7572150c189c6553c2448334116ab717680de66d
released in v0.14.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A caller might be interested in differentiating the cause for
error, especially if DeviceNotFound error occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In the previous commit we are using uint64_t for storing subnet
prefix and interface id that qemu reports in
RDMA_GID_STATUS_CHANGED event. We also report them in some debug
messages. This poses a problem because uint64_t can be UL or ULL
depending on the host architecture and hence we wouldn't know
which format to use. Switch to ULL which is big enough and
doesn't suffer from the issue.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted on the monitor when a GID table in pvrdma device
is modified and the change needs to be propagate to the backend RDMA
device's GID table.
The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determine by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.
The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver's
add_gid function which in turn update the device.
To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a changed is made to the pvrdma device's GID table a special
QMP messages is sent to be processed by libvirt to update the address of
the backend Ethernet device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add functions to set the IOThreadInfo param data for the live guest.
Modify the _qemuMonitorIOThreadInfo to have a flag to indicate when
a value was set so that we don't set a value unless it was desired
to be set.
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>,
but extracted into a separate patch. Note that qapi expects to receive
integer parameters rather than unsigned long long or unsigned int's.
QEMU does save the value in larger signed 64 bit values eventually.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code used to probe for the functionality so that it does not
litter the code used for actual work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Starting from qemu 2.7 the 'device' argument is in fact a name of the
job itself. Change our APIs accordingly and adjust the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Disk image size data are not contained in the reply of query-blockstats
but need to be gathered from query-block. For use with -blockdev we
really need to call 'query-named-block-nodes' and process it to retrieve
the correct data.
This patch introduces qemuMonitorBlockStatsUpdateCapacityBlockdev which
updates the capacity data by nodename rather than device name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we can use the full range of commands to manipulate the
tray and the medium separately. Implement monitor code for this.
Schema testing done in the qemumonitorjsontest allows us to verify that
we generate the commands correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'node-name' provided in the event if 'device' is empty to look
up the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling of the 'id' field in the event which corresponds to the
QDEV id of the device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that 'query-nodes' is not what we want and the
'query-blockstats' command was in fact buggy. Revert the new field since
it's not needed.
This reverts commit 50edca1331.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The 'query-blockstats' command does not return statistics for the
explicitly named nodes unless the new argument is specified. Add
infrastrucuture that will allow us to use the new approach if desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the dual mode code which allowed to create snapshots without
support for 'transaction'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document and check that @props contains a pointer to a json object and
check that both necessary fields are present. Also mark @props as
NONNULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function fetches status of all pr-managers. So far, qemu
reports only a single attribute "connected" but that fits our
needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As qemuMonitorJSONIOProcess will call qemuMonitorJSONIOProcessEvent
which unlocks the monitor mutex, there is some extreme situation,
eg qemu send message to monitor twice in a short time, where the
local viriable 'msg' of qemuMonitorIOProcess could be a wild point:
1. qemuMonitorSend() assign mon->msg to parameter 'msg', which is alse a
local variable of its caller qemuMonitorJSONCommandWithFd(), cause
eventloop to send message to monitor, then wait condition.
2. qemu send message to monitor for the first time immediately.
3. qemuMonitorIOProcess() is called, then wake up the qemuMonitorSend()
thread, but the qemuMonitorSend() thread stuck for a while as cpu pressure
or some other reasons, which means the qemu monitor is still unlocked.
4. qemu send event message to monitor for the second time,
such as RTC_CHANGE event
5. qemuMonitorIOProcess() is called again, the local viriable 'msg' is
assigned to mon->msg.
6. qemuMonitorIOProcess() call qemuMonitorJSONIOProcess() to deal with
the qemu event.
7. qemuMonitorJSONIOProcess() unlock the qemu monitor in the macro
'QEMU_MONITOR_CALLBACK', then qemuMonitorSend() thread get the mutex
and free the mon->msg, assign mon->msg to NULL.
Signed-off-by: Weilun Zhu <zhuweilun@huawei.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Fix the return value status comparison checking for call to
virJSONValueObjectCreateVArgs introduced by commit id f0a23c0c3.
If a NULL arglist is passed, then a 0 is returned which is a
valid status and we only should fail when the return is < 0.
This resolves an issue seen for "virsh iothreadadd $dom $iothread"
where a "error: An error occurred, but the cause is unknown" error
was generated when trying to hotplug an IOThread to a domain since
qemuDomainHotplugAddIOThread passes a NULL arglist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemucapabilitiestest for simplicity uses one test monitor object for
simulating work of two separate inquiries of the qemu process. To allow
better testing in the future it will be required to reset the counter
so that it accurately simulates how qemu would behave.
This patch adds a private monitor API which allows to reset the counter
which will be usable only in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.
With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the old qcow2 encryption is removed we can safely delete all
this code since it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new monitor command internal API to allow wrapping of the object
name and alias into the JSON props so that they don't have to be passed
out of band.
The new API also takes a double pointer so that it can be cleared when
the value is consumed so that it does not need to happen in every single
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the text monitor was deleted this event can't be triggered.
Remove it and all the unnecessary code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop all conditional calls which have JSON variants, now that we
guarantee JSON monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu did not QAPIfy these and the design and name will most probably
change. The replacements will not be compatible. Drop the JSON stubs and
annotate that there won't be a replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no callers for these. Remove them and the monitor
implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
drive-mirror allows only file targets. Introduce support for
blockdev-mirror that is able to copy to any BDS described by a node name
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we've gotten rid of misleading names we can introduce
qemuMonitorGetObjectProps() function which queries -object
properties. Again, some parts of code can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow encryption of the non-shared storage migration NBD connection
we will need to instantiated the NBD server with the TLS env.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extract architecture specific data from query-cpus[-fast] if
available. A new function qemuMonitorJSONExtractCPUArchInfo()
can then call architecture-specific extraction handlers.
Initially, there's a handler for s390 cpu info to
set the halted property depending on the s390 cpu state
returned by QEMU. With this it's still possible to report
the halted condition even when using query-cpus-fast.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use query-cpus-fast instead of query-cpus if supported by QEMU.
Based on the QEMU_CAPS_QUERY_CPUS_FAST capability.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is indeed getting -device properties and not
-object properties. The current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration capabilities parsing and formatting at one
place, i.e., in qemu_migration_params.c. The parsing is already there in
qemuMigrationCapsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at one
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at once
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally QEMU provided query-migrate-cache-size and
migrate-set-cache-size QMP commands for querying/setting XBZRLE cache
size. In version 2.11 QEMU added support for XBZRLE cache size to the
general migration paramaters commands.
This patch adds support for this parameter to libvirt to make sure it is
properly restored to its original value after a failed or aborted
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our current monitor API forces the caller to call
migrate-set-capabilities QMP command for each capability separately,
which is quite suboptimal. Let's add a new API for setting all
capabilities at once.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last use of qemuMonitorMigrateToCommand was removed years back in
commit 2e90c9daf9
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Nov 6 16:50:26 2015 +0000
qemu: assume support for all migration protocols except rdma
Prior to that commit, 'exec:' to used to replicate the 'unix:' protocol
by spawning 'nc'.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The JSON array was processed to the hash table used by the query apis in
the monitor code. Move it to a new helper in qemu_qapi.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the query-dump API's in order to allow the dump-guest-memory
to be used to monitor progress. This will use the dump stats
extraction helper to fill a return buffer.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The event will be fired when the domain memory only dump completes.
Fill in a return buffer to store/pass along the dump statistics that
will be eventually shared by a query-dump command. Also pass along
the status of the filling and any possible error received.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1536461
This reverts commit aeda1b8c56.
Problem is that we need mon->lastError to be set because it's
used all over the place. Also, there's nothing wrong with
reporting error if one occurred. I mean, if there's a thread
executing an API and which currently is talking on monitor it
definitely wants the error reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We read from QEMU until seeing a \r\n pair to indicate a completed reply
or event. To avoid memory denial-of-service though, we must have a size
limit on amount of data we buffer. 10 MB is large enough that it ought
to cope with normal QEMU replies, and small enough that we're not
consuming unreasonable mem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The PROBE macro used in qemuMonitorIOProcess and the VIR_DEBUG message
in qemuMonitorJSONIOProcess create a lot of logging churn when debug
logging is enabled during monitor communication.
The messages logged from the PROBE macro are rather useless since they
are reporting the partial state of receiving the reply from qemu. The
actual full reply is still logged in qemuMonitorJSONIOProcessLine once
the full message is received.
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check can be easily replaced with a simple test in the JSON
implementation and we don't need to update it every time a new parameter
is added.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
vcpu properties gathered from query-hotpluggable cpus need to be passed
back to qemu. As qemu did not use the node-id property until now and
libvirt forgot to pass it back properly (it was parsed but not passed
around) we did not honor this.
This patch adds node-id to the structures where it was missing and
passes it around as necessary.
The test data was generated with a VM with following config:
<numa>
<cell id='0' cpus='0,2,4,6' memory='512000' unit='KiB'/>
<cell id='1' cpus='1,3,5,7' memory='512000' unit='KiB'/>
</numa>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452053
Add a comment for mon->watch to make clear what's the purpose of this
value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a shutdown is expected because it was triggered via libvirt we can
also expect the monitor to close. In those cases do not report an
internal error like:
"internal error: End of file from qemu monitor"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Implement qemuMonitorRegister() as there is already a
qemuMonitorUnregister() function. This way it may be easier to
understand the code paths.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
There were multiple race conditions that could lead to segmentation
faults. The first precondition for this is qemuProcessLaunch must fail
sometime shortly after starting the new QEMU process. The second
precondition for the segmentation faults is that the new QEMU process
dies - or to be more precise the QEMU monitor has to be closed
irregularly. If both happens during qemuProcessStart (starting a
domain) there are race windows between the thread with the event
loop (T1) and the thread that is starting the domain (T2).
First segmentation fault scenario:
If qemuProcessLaunch fails during qemuProcessStart the code branches
to the 'stop' path where 'qemuMonitorSetDomainLog(priv->mon, NULL,
NULL, NULL)' will set the log function of the monitor to NULL (done in
T2). In the meantime the event loop of T1 will wake up with an EOF
event for the QEMU monitor because the QEMU process has died. The
crash occurs if T1 has checked 'mon->logFunc != NULL' in qemuMonitorIO
just before the logFunc was set to NULL by T2. If this situation
occurs T1 will try to call mon->logFunc which leads to the
segmentation fault.
Solution:
Require the monitor lock for setting the log function.
Backtrace:
0 0x0000000000000000 in ?? ()
1 0x000003ffe9e45316 in qemuMonitorIO (watch=<optimized out>,
fd=<optimized out>, events=<optimized out>, opaque=0x3ffe08aa860) at
../../src/qemu/qemu_monitor.c:727
2 0x000003fffda2e1a4 in virEventPollDispatchHandles (nfds=<optimized
out>, fds=0x2aa000fd980) at ../../src/util/vireventpoll.c:508
3 0x000003fffda2e398 in virEventPollRunOnce () at
../../src/util/vireventpoll.c:657
4 0x000003fffda2ca10 in virEventRunDefaultImpl () at
../../src/util/virevent.c:314
5 0x000003fffdba9366 in virNetDaemonRun (dmn=0x2aa000cc550) at
../../src/rpc/virnetdaemon.c:818
6 0x000002aa00024668 in main (argc=<optimized out>, argv=<optimized
out>) at ../../daemon/libvirtd.c:1541
Second segmentation fault scenario:
If qemuProcessLaunch fails it will unref the log context and with
invoking qemuMonitorSetDomainLog(priv->mon, NULL, NULL, NULL)
qemuDomainLogContextFree() will be invoked. qemuDomainLogContextFree()
invokes virNetClientClose() to close the client and cleans everything
up (including unref of _virLogManager.client) when virNetClientClose()
returns. When T1 is now trying to report 'qemu unexpectedly closed the
monitor' libvirtd will crash because the client has already been
freed.
Solution:
As the critical section in qemuMonitorIO is protected with the monitor
lock we can use the same solution as proposed for the first
segmentation fault.
Backtrace:
0 virClassIsDerivedFrom (klass=0x3100979797979797,
parent=0x2aa000d92f0) at ../../src/util/virobject.c:169
1 0x000003fffda659e6 in virObjectIsClass (anyobj=<optimized out>,
klass=<optimized out>) at ../../src/util/virobject.c:365
2 0x000003fffda65a24 in virObjectLock (anyobj=0x3ffe08c1db0) at
../../src/util/virobject.c:317
3 0x000003fffdba4688 in
virNetClientIOEventLoop (client=client@entry=0x3ffe08c1db0,
thiscall=thiscall@entry=0x2aa000fbfa0) at
../../src/rpc/virnetclient.c:1668
4 0x000003fffdba4b4c in
virNetClientIO (client=client@entry=0x3ffe08c1db0,
thiscall=0x2aa000fbfa0) at ../../src/rpc/virnetclient.c:1944
5 0x000003fffdba4d42 in
virNetClientSendInternal (client=client@entry=0x3ffe08c1db0,
msg=msg@entry=0x2aa000cc710, expectReply=expectReply@entry=true,
nonBlock=nonBlock@entry=false) at ../../src/rpc/virnetclient.c:2116
6 0x000003fffdba6268 in
virNetClientSendWithReply (client=0x3ffe08c1db0, msg=0x2aa000cc710) at
../../src/rpc/virnetclient.c:2144
7 0x000003fffdba6e8e in virNetClientProgramCall (prog=0x3ffe08c1120,
client=<optimized out>, serial=<optimized out>, proc=<optimized out>,
noutfds=<optimized out>, outfds=0x0, ninfds=0x0, infds=0x0,
args_filter=0x3fffdb64440
<xdr_virLogManagerProtocolDomainReadLogFileArgs>, args=0x3ffffffe010,
ret_filter=0x3fffdb644c0
<xdr_virLogManagerProtocolDomainReadLogFileRet>, ret=0x3ffffffe008) at
../../src/rpc/virnetclientprogram.c:329
8 0x000003fffdb64042 in
virLogManagerDomainReadLogFile (mgr=<optimized out>, path=<optimized
out>, inode=<optimized out>, offset=<optimized out>, maxlen=<optimized
out>, flags=0) at ../../src/logging/log_manager.c:272
9 0x000003ffe9e0315c in qemuDomainLogContextRead (ctxt=0x3ffe08c2980,
msg=0x3ffffffe1c0) at ../../src/qemu/qemu_domain.c:4422
10 0x000003ffe9e280a8 in qemuProcessReadLog (logCtxt=<optimized out>,
msg=msg@entry=0x3ffffffe288) at ../../src/qemu/qemu_process.c:1800
11 0x000003ffe9e28206 in qemuProcessReportLogError (logCtxt=<optimized
out>, msgprefix=0x3ffe9ec276a "qemu unexpectedly closed the monitor")
at ../../src/qemu/qemu_process.c:1836
12 0x000003ffe9e28306 in
qemuProcessMonitorReportLogError (mon=mon@entry=0x3ffe085cf10,
msg=<optimized out>, opaque=<optimized out>) at
../../src/qemu/qemu_process.c:1856
13 0x000003ffe9e452b6 in qemuMonitorIO (watch=<optimized out>,
fd=<optimized out>, events=<optimized out>, opaque=0x3ffe085cf10) at
../../src/qemu/qemu_monitor.c:726
14 0x000003fffda2e1a4 in virEventPollDispatchHandles (nfds=<optimized
out>, fds=0x2aa000fd980) at ../../src/util/vireventpoll.c:508
15 0x000003fffda2e398 in virEventPollRunOnce () at
../../src/util/vireventpoll.c:657
16 0x000003fffda2ca10 in virEventRunDefaultImpl () at
../../src/util/virevent.c:314
17 0x000003fffdba9366 in virNetDaemonRun (dmn=0x2aa000cc550) at
../../src/rpc/virnetdaemon.c:818
18 0x000002aa00024668 in main (argc=<optimized out>, argv=<optimized
out>) at ../../daemon/libvirtd.c:1541
Other code parts where the same problem was possible to occur are
fixed as well (qemuMigrationFinish, qemuProcessStart, and
qemuDomainSaveImageStartVM).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The hyperv panic notifier reports additional data in form of 5 registers
that are reported in the crash event from qemu. Log them into the VM log
file and report them as a warning so that admins can see the cause of
crash of their windows VMs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426176
For certain kinds of panic notifiers (notably hyper-v) qemu is able to
report some data regarding the crash passed from the guest.
Make the data accessible to the callback in qemu so that it can be
processed further.
To allow matching the node names gathered via 'query-named-block-nodes'
we need to query and then use the top level nodes from 'query-block'.
Add the data to the structure returned by qemuMonitorGetBlockInfo.
Add monitor tooling for calling query-named-block-nodes. The monitor
returns the data as the raw JSON array that is returned from the
monitor.
Unfortunately the logic to extract the node names for a complete backing
chain will be so complex that I won't be able to extract any meaningful
subset of the data in the monitor code.
The event is fired when a given block backend node (identified by the
node name) experiences a write beyond the bound set via
block-set-write-threshold QMP command. This wires up the monitor code to
extract the data and allow us receiving the events and the capability.
Add the fields to support setting tls-creds and tls-hostname during
a migration (either source or target). Modify the query migration
function to check for the presence and set the field for future
consumers to determine which of 3 conditions is being met (NULL,
present and set to "", or present and sent to something). These
correspond to qemu commit id '4af245dc3' which added support to
default the value to "" and allow setting (or resetting) to ""
in order to disable. This reset option allows libvirt to properly
use the tls-creds and tls-hostname parameters.
Modify code paths that either allocate or use stack space in order
to call qemuMigrationParamsClear or qemuMigrationParamsFree for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The prototype requires not passing a NULL in the parameter and the callers
all would fail far before this code would fail if 'vm' was NULL, so just
remove the check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemuMonitorGetGuestCPU can now optionally create CPU data from
filtered-features in addition to feature-words.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There were couple of reports on the list (e.g. [1]) that guests
with huge amounts of RAM are unable to start because libvirt
kills qemu in the initialization phase. The problem is that if
guest is configured to use hugepages kernel has to zero them all
out before handing over to qemu process. For instance, 402GiB
worth of 1GiB pages took around 105 seconds (~3.8GiB/s). Since we
do not want to make the timeout for connecting to monitor
configurable, we have to teach libvirt to count with this
fact. This commit implements "1s per each 1GiB of RAM" approach
as suggested here [2].
1: https://www.redhat.com/archives/libvir-list/2017-March/msg00373.html
2: https://www.redhat.com/archives/libvir-list/2017-March/msg00405.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
==11846== 240 bytes in 1 blocks are definitely lost in loss record 81 of 107
==11846== at 0x4C2BC75: calloc (vg_replace_malloc.c:624)
==11846== by 0x18C74242: virAllocN (viralloc.c:191)
==11846== by 0x4A05E8: qemuMonitorCPUModelInfoCopy (qemu_monitor.c:3677)
==11846== by 0x446E3C: virQEMUCapsNewCopy (qemu_capabilities.c:2171)
==11846== by 0x437335: testQemuCapsCopy (qemucapabilitiestest.c:108)
==11846== by 0x437CD2: virTestRun (testutils.c:180)
==11846== by 0x437AD8: mymain (qemucapabilitiestest.c:176)
==11846== by 0x4397B6: virTestMain (testutils.c:992)
==11846== by 0x437B44: main (qemucapabilitiestest.c:188)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Using libvirt to do live migration over RDMA via IPv6 address failed.
For example:
rhel73_host1_guest1 qemu+ssh://[deba::2222]/system --verbose
root@deba::2222's password:
error: internal error: unable to execute QEMU command 'migrate': RDMA
ERROR: could not rdma_getaddrinfo address deba
As we can see, the IPv6 address used by rdma_getaddrinfo() has only
"deba" part because we didn't properly enclose the IPv6 address in []
and passed rdma:deba::2222:49152 as the migration URI in
qemuMonitorMigrateToHost.
Signed-off-by: David Dai <zdai@linux.vnet.ibm.com>
In cases where CPU hotplug is supported by qemu force the monitor to
reject invalid or broken responses to 'query-cpus'. It's expected that
the command returns usable data in such case.
query-cpu-model-expansion is used to get a list of features for a given cpu
model name or to get the model and features of the host hardware/environment
as seen by Qemu/kvm.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Commit 3f71c79768 added 'qemu_id' field to track the id of the cpu
as reported by query-cpus. The patch did not include changes necessary
to propagate the id through the functions matching the data to the
libvirt cpu structures and thus all vcpus had id 0.
We don't need to call qemuMonitorGetCPUInfo which is very inefficient to
get data required to update the vcpu 'halted' state.
Add a monitor helper that will retrieve the halted state and return it
in a bitmap so that it can be indexed easily.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Attaching to a existing qemu process allows to get us into a situation
when qemu is new enough to have JSON monitor and new vCPU hotplug but
the json monitor is not used. The vCPU detection code would require it
though. This broke attaching to qemu processes.
Make the condition less strict and just skip the vCPU hotplug detection
if JSON monitor is not available.
Resolves one of the symptoms in:
https://bugzilla.redhat.com/show_bug.cgi?id=1378401
The list of supported CPU models in domain capabilities is stored in
virDomainCapsCPUModels. Let's use the same object for storing CPU models
in QEMU capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Both qemu monitor and agent print the same
log on HUANGUP event, which would be confusing
when reading libvirtd log.
This patch will give a different log message to them.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Return whether a vcpu entry is hotpluggable or online so that upper
layers don't have to infer the information from other data.
Advantage is that this code can be tested by unit tests.
The algorithm that matches data from query-cpus and
query-hotpluggable-cpus is quite complex. Start using descriptive
iterator names to avoid confusion.
When migration fails, we need to poke QEMU monitor to check for a reason
of the failure. We did this using query-migrate QMP command, which is
not supposed to return any meaningful result on the destination side.
Thus if the monitor was still functional when we detected the migration
failure, parsing the answer from query-migrate always failed with the
following error message:
"info migration reply was missing return status"
This irrelevant message was then used as the reason for the migration
failure replacing any message we might have had.
Let's use harmless query-status for poking the monitor to make sure we
only get an error if the monitor connection is broken.
https://bugzilla.redhat.com/show_bug.cgi?id=1374613
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For hotplug purposes it's necessary to retrieve data using
query-hotpluggable-cpus while the old query-cpus API report thread IDs
and order of hotplug.
This patch adds code that merges the data using a rather non-trivial
algorithm and fills the data to the qemuMonitorCPUInfo structure for
adding to appropriate place in the domain definition.
To allow matching up the data returned by query-cpus to entries in the
query-hotpluggable-cpus reply for CPU hotplug it's necessary to extract
the QOM path as it's the only link between the two.
Prepare to extract more data by returning an array of structs rather than
just an array of thread ids. Additionally report fatal errors separately
from qemu not being able to produce data.
Commit 4a585a88 introduced searching QOM device path by alias, let's use it for
memballoon too. This may speedup the search because in most cases we will find
the correct QOM device path directly by using alias without the need for the
recursion code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit ce745914 introduced detection of actual video ram sizes to fix migration
if QEMU decide to modify the values provided by libvirt. This works perfectly
for domains with number of video devices up to two.
If there are more than two video devices in the guest all the secondary devices
in the XML will have the same memory values. This is because our current code
search for QOM device path only by the device type name and all the secondary
video devices has the same name "qxl".
This patch introduces a new search function that will try to search a QOM device
path using also device's alias if the alias is available. After that it will
fallback to the old recursive code if the alias search found no results.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358728
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
qemuMonitorMigrationParams is a better name for a structure which
contains various migration parameters. While doing that, we should use
full names for individual parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Checking whether the function has anything to do is better done in the
function rather then requiring callers to do that.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Extract information for all disks and update tray state and source only
for removable drives. Additionally store whether a drive is removable
and whether it has a tray.