Commit Graph

208 Commits

Author SHA1 Message Date
Philipp Hahn
2d9931d20c doc: Add <deviceboot> capability.
Allow /capabilities/guest/features/deviceboot.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2011-11-03 13:41:04 -06:00
Josh Durgin
7e02076624 Use a common xml type for ceph secret usage.
The types used in domaincommon.rng and secret.rng should be the same.

Move genericName to basictypes.rng, then drop redundant types now
that secret.rng uses basictypes.rng.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-28 16:01:14 -06:00
Josh Durgin
5bd6271f59 storage: add auth to virDomainDiskDef
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:

<auth username='myuser'>
 <secret type='ceph' usage='secretname'/>
</auth>

or

<auth username='myuser'>
 <secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-10-28 12:51:22 -06:00
Sage Weil
536d1f8746 secret: add Ceph secret type
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.

The xml looks like this:

<secret ephemeral='no' private='no'>
 <uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
 <usage type='ceph'>
   <name>mycluster_admin</name>
 </usage>
</secret>

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
2011-10-28 11:34:17 -06:00
Stefan Berger
552fe4cce6 nwfilter: extend schema to support new targets
Extend the nwfilter schema to support the continue and return targets.
2011-10-25 11:21:57 -04:00
Michal Privoznik
e5a84d74a2 conf: Introduce optional startupPolicy attribute for cdrom and floppy
This attribute says what to do with cdrom (or floppy) if
the source is missing. It accepts:
- mandatory - fail if missing for any reason (the default)
- requisite - fail if missing on boot up, drop if missing on
              migrate/restore/revert
- optional  - drop if missing at any start attempt.

However, this patch introduces only XML part of this new
functionality.
2011-10-25 09:22:42 +02:00
Jim Fehlig
c1bc3d892c Add AHCI support to qemu driver
Tested with multiple AHCI controllers and multiple disks attached
to a controller. E.g.,

    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk0.raw'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk1.raw'/>
      <target dev='sdb' bus='sata'/>
      <address type='drive' controller='0' bus='0' unit='1'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw'/>
      <source file='/var/lib/libvirt/images/test/disk2.raw'/>
      <target dev='sdc' bus='sata'/>
      <address type='drive' controller='1' bus='0' unit='0'/>
    </disk>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </controller>
    <controller type='sata' index='1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </controller>
2011-10-17 15:44:21 -06:00
Harsh Prateek Bora
da8127e6b3 Introduce <driver> under <filesystem> to support open-by-handle
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.

Sample:

    <filesystem type='mount'>
      <driver type='handle'/>
      <source dir='/folder/to/share1'/>
      <target dir='mount_tag1'/>
    </filesystem>

    <filesystem type='mount'>
      <driver type='path'/>
      <source dir='/folder/to/share2'/>
      <target dir='mount_tag2'/>
    </filesystem>

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-12 12:15:28 -06:00
Laine Stump
4bb4109f7b qemu: add separate rerror_policy for disk errors
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.

This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).

For consistency, the value "report" has been added to the possible
values for error_policy as well.
2011-10-06 14:49:23 -04:00
Laine Stump
c329db7180 qemu: make PCI multifunction support more manual
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see

  https://bugzilla.redhat.com/show_bug.cgi?id=728174

and the discussion before and after

  https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html

This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:

  <address type='pci' domain='0x0000' bus='0x00'
           slot='0x04' function='0x0' multifunction='on'/>

In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.

With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.

A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
2011-10-01 11:48:28 -04:00
Laine Stump
dc79852af8 qemu: add ability to set PCI device "rombar" on or off
This patch was made in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=738095

In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).

rombar is forced on/off by adding:

  <rom bar='on|off'/>

inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.

At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
2011-09-27 11:23:28 -04:00
Oskari Saarenmaa
f887334dcf Add unsafe cache mode support for disk driver
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.
2011-09-23 08:29:57 -06:00
Peter Krempa
edd1295e1d link-state: conf: Add element to XML for controling link state
A new element is introduced to XML that allows to control
state of virtual network interfaces in hypervisors.

Live modification of the link state allows networking tools
propagate topology changes to guest OS or testing of
scenarios in complex (virtual) networks.

This patch adds elements to XML grammars and parsing and generating
code.
2011-09-06 16:08:15 +08:00
Marc-André Lureau
2e0dbaad9b redirdev: allows to specify device address
It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.

     <redirdev bus='usb' type='spicevmc'>
       <address type='usb' bus='0' port='4'/>
     </redirdev>
2011-09-06 15:12:52 +08:00
Eric Blake
89b6284fd9 snapshot: also support disks by path
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots.  So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.

* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-09-05 07:03:04 -06:00
Eric Blake
d6f6b2d194 snapshot: add <disks> to snapshot xml
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.

For now, no driver accepts this element; that will come later.

<domainsnapshot>
  ...
  <disks>
    <disk name='vda' snapshot='no'/>
    <disk name='vdb' snapshot='internal'/>
    <disk name='vdc' snapshot='external'>
      <driver type='qcow2'/>
      <source file='/path/to/new'/>
    </disk>
  </disks>
  <domain>
    ...
    <devices>
      <disk ...>
        <driver name='qemu' type='raw'/>
        <target dev='vdc'/>
        <source file='/path/to/old'/>
      </disk>
    </devices>
  </domain>
</domainsnapshot>

* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
2011-09-05 07:03:04 -06:00
Eric Blake
5b30b08d66 snapshot: support extra state in snapshots
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
2011-09-05 07:03:04 -06:00
Eric Blake
471235307f snapshot: additions to domain xml for disks
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
https://www.redhat.com/archives/libvir-list/2011-August/msg00552.html

Adds snapshot attribute and transient sub-element:

<devices>
  <disk type=... snapshot='no|internal|external'>
    ...
    <transient/>
  </disk>
</devices>

* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
2011-09-05 07:03:04 -06:00
Eric Blake
2a95a3e976 snapshot: update rng to support full domain in xml
This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.
2011-09-03 08:12:13 -06:00
Marc-André Lureau
162efa1a7c Add "redirdev" redirection device
- create a new "redirdev" element for this purpose
2011-09-02 23:39:03 +08:00
Marc-André Lureau
31710a5389 Modify USB port to be defined as a port path
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.

      <hub type='usb'>
         <address type='usb' bus='0' port='1'/>
      </hub>

      <input type='mouse' type='usb'>
         <address type='usb' bus='0' port='1.1'/>
      </hub>

also add a test entry
2011-09-02 23:39:03 +08:00
Marc-André Lureau
fdabeb3c5f Add USB hub device
domain parsing and serialization code, qemu driver backend and
a couple of test
2011-09-02 23:38:52 +08:00
Marc-André Lureau
f3ce59621f Add USB companion controllers support
Companion controllers take an extra 'master' attribute to associate
them.

Also add tests for this
2011-09-02 23:22:56 +08:00
Marc-André Lureau
22c0d433ab USB devices gain a new USB address child element
Expand the domain and the QEmu driver code
Adds a couple of tests
2011-09-02 23:22:56 +08:00
Marc-André Lureau
d6d54cd19e Add a new controller type 'usb' with optionnal 'model'
The model by default is piix3-uchi.

Example:
<controller type='usb' index='0' model='ich9-ehci'/>
2011-09-02 23:22:56 +08:00
Marc-André Lureau
2e4b5243b2 Add USB controller models
List is: piix3-uhci piix4-uhci ehci ich9-ehci1 ich9-uhci1 ich9-uhci2
ich9-uhci3 vt82c686b-uhci pci-ohci
2011-09-02 23:22:56 +08:00
Osier Yang
6ee52c1b76 Add directsync cache mode support for disk driver
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
    As even $prefix_CACHE_V2 is set, we can't known if directsync
    is supported.
2011-09-02 21:36:58 +08:00
Eric Blake
6766ff10dd snapshot: track current snapshot across restarts
Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.

This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.

* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.
2011-08-25 15:11:03 -06:00
Laine Stump
73c0a148af qemu: support event_idx parameter for virtio disk and net devices
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-15 09:35:42 -04:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00
Michal Privoznik
a8923162c9 bandwidth: Define schema and create documentation
Define new 'bandwidth' element with possible child element 'inbound'
and 'outbound' addressing incoming and outgoing traffic respectively:

<bandwidth>
  <inbound average='1000' peak='2000' burst='5120'/>
  <outbound average='500'/>
</bandwidth>

Leaving any element out means not to shape traffic in that
direction.
The units for average and peak (rate) are in kilobytes per second,
for burst (size) are just in kilobytes.
This element can be inserted into domain's 'interface' and
'network'.
2011-07-25 13:49:06 +08:00
Laine Stump
40fd7073be conf: support abstracted interface info in network XML
The network XML is updated in the following ways:

1) The <forward> element can now contain a list of forward interfaces:

     <forward .... >
       <interface dev='eth10'/>
       <interface dev='eth11'/>
       <interface dev='eth12'/>
       <interface dev='eth13'/>
     </forward>

   The first of these takes the place of the dev attribute that is
   normally in <forward> - when defining a network you can specify
   either one, and on output both will be present. If you specify
   both on input, they must match.

2) In addition to forward modes of 'nat' and 'route', these new modes
   are supported:

     private, passthrough, vepa - when this network is referenced by a
     domain's interface, it will have the same effect as if the
     interface had been defined as type='direct', e.g.:

        <interface type='direct'>
          <source mode='${mode}' dev='${dev}>
          ...
        </interface>

     where ${mode} is one of the three new modes, and ${dev} is an interface
     selected from the list given in <forward>.

     bridge - if a <forward> dev (or multiple devs) is defined, and
     forward mode is 'bridge' this is just like the modes 'private',
     'passthrough', and 'vepa' above. If there is no forward dev
     specified but a bridge name is given (e.g. "<bridge
     name='br0'/>"), then guest interfaces using this network will use
     libvirt's "host bridge" mode, equivalent to this:

       <interface type='bridge'>
          <source bridge='${bridge-name}'/>
          ...
       </interface>

3) A network can have multiple <portgroup> elements, which may be
   selected by the guest interface definition (by adding
   "portgroup='${name}'" in the <source> element along with the
   network name). Currently a portgroup can only contain a
   virtportprofile, but the intent is that other configuration items
   may be put there int the future (e.g. bandwidth config). When
   building a guest's interface, if the <interface> XML itself has no
   virtportprofile, and if the requested network has a portgroup with
   a name matching the name given in the <interface> (or if one of the
   network's portgroups is marked with the "default='yes'" attribute),
   the virtportprofile from that portgroup will be used by the
   interface.

4) A network can have a virtportprofile defined at the top level,
   which will be used by a guest interface when connecting in one of
   the 'direct' modes if the guest interface XML itself hasn't
   specified any virtportprofile, and if there are also no matching
   portgroups on the network.
2011-07-21 14:46:53 -04:00
Laine Stump
07f4136993 conf: support abstracted interface info in domain interface XML
the domain XML <interface> element is updated in the following ways:

1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')

2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.

3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.

The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
2011-07-21 14:46:44 -04:00
Laine Stump
a3d95b550b conf: put virtPortProfile struct / functions in a common location
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
2011-07-21 14:46:33 -04:00
Wen Congyang
f27f62ca69 Update XML Schema for new entries
Define the element cputune's child elements 'period' and 'quota':
<cputune>
  <period>100000</period>
  <quota>50000</quota>
</cputune>
2011-07-21 17:11:12 +08:00
Jim Fehlig
eb3143154e Do not drop kernel cmdline for xen pv domains
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified.  The current config-to-sxpr mapping
ignores cmdline when bootloader is present.

Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.

V2: Fix existing testcase broken by this patch and add new testcases
2011-07-11 09:11:15 -06:00
Michal Privoznik
874e65aa15 bios: Add support for SGA
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
2011-07-11 11:47:14 +02:00
Michal Privoznik
30c43afd73 graphics: add support for action_if_connected in qemu
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
2011-07-08 17:00:43 +02:00
John Williams
a1092070d4 microblaze: Add architecture support
Add libvirt support for MicroBlaze architecture as a QEMU target.  Based on mips/mipsel pattern.

Signed-off-by: John Williams <john.williams@petalogix.com>
2011-07-07 17:49:21 -06:00
Laine Stump
0c97dc4159 xml: create an RNG file for common types and move some definitions there
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.

This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
2011-07-05 12:33:21 -04:00
Laine Stump
b2bf813e58 docs: sort the file list in the schemas Makefile 2011-07-05 12:33:21 -04:00
Daniel P. Berrange
6321fd9798 Allow for resource relabelling with static labels
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.

  <seclabel model='selinux' type='static' relabel='yes'>
    <label>system_u:system_r:svirt_t:s0:c392,c662</label>
  </seclabel>

* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
  the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
  'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
  attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
  attribute instead of label type and fill in <imagelabel>
  attribute if relabel is enabled.
2011-07-04 11:18:57 +01:00
Daniel P. Berrange
4ebfc42716 Allow a base label to be specified in dynamic labelling mode
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed

eg

   <seclabel type='dynamic' model='selinux'>
     <baselabel>system_u:object_r:virt_t:s0</baselabel>
   </seclabel>

* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
  of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
  a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
  label, if available
2011-07-04 11:17:19 +01:00
Michal Novotny
9d4e2845d4 Network: Add support for DNS hosts definition to the network XML
This commit introduces names definition for the DNS hosts file using
the following syntax:

  <dns>
    <host ip="192.168.1.1">
      <name>alias1</name>
      <name>alias2</name>
    </host>
  </dns>

Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
2011-06-24 16:15:36 -04:00
Michal Novotny
5dd986dbd7 Add TXT record support for virtual DNS service
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:

  <dns>
    <txt name="example" value="example value" />
  </dns>

Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
2011-06-24 16:15:12 -04:00
Michal Privoznik
017abcbb1a qemu: domain I/O asynchronous handling
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
2011-06-22 09:26:24 +02:00
Osier Yang
e68b9ab0b8 numatune: Define XML schema
Example XML:

<numatune>
  <memory mode="strict" nodeset="0-10,^4"/>
</numatune>

Please enter the commit message for your changes. Lines starting
2011-06-20 15:13:25 +08:00
Marc-André Lureau
98bfdff12c spice: add <clipboard copypaste='yes|no'> option
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste

https://bugzilla.redhat.com/show_bug.cgi?id=693661
2011-06-14 17:03:26 -06:00
Daniel P. Berrange
1ea83207c8 Support leases in guest XML and lock manager
A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML

  <devices>
     ...
     <lease>
       <lockspace>somearea</lockspace>
       <key>thequickbrownfoxjumpsoverthelazydog</key>
       <target path='/some/lease/path' offset='23432'/>
     </lease>
     ...
  </devices>

The 'lockspace' is a unique identifier for the lockspace which
the lease is associated

The 'key' is a unique identifier for the resource associated
with the lease.

The 'target' is the file on disk where the leases are held.

* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
  tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
  tests/qemuxml2xmltest.c: Test XML handling for leases
2011-06-02 10:54:00 +01:00