These three functions are destined to replace
virNetDev(Replace|Restore)NetConfig() and
virNetDev(Replace|Restore)MacAddress(), which both do the save and set
together as a single step. We need to separate the save, read, and set
steps because there will be situations where we need to do something
else in between (in particular, we will need to rebind a VF's driver
after save but before set).
This patch creates the new functions, but doesn't call them - that
will come in a subsequent patch. Note that the new functions to
read/write the file that stores the original network config now uses
JSON rather than plaintext (it still recognizes the old format as well
though, so it won't get confused during an upgrade).
Keep track of the assigned mediated devices the same way we do it for
the rest of hostdevs. Methods like 'Prepare', 'Update', and 'ReAttach'
are introduced by this patch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Beside creation, disposal, getter, and setter methods the module exports
methods to work with lists of mediated devices.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This way more drivers can utilize the functionality without copying
the code. And we can therefore test it in one place for all of them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That file has only two exported files and each one of them has
different naming. virNode is what all the other files use, so let's
use it. It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While on that, drop support for kernels from RHEL-5 era (missing
cpu/present file). Also add some useful functions and export them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
By using this we are able to easily switch the sysfs path being
used (fake it). This will not only help tests in the future but can
be also used from files where the code is duplicated currently.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These helpers are doing just a read and covert the value, but they
properly size the read limit, handle additional whitespace characters,
and unify error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commits eaf18f4c2b and 86dd9fac0f separated util/host{cpu,mem}
stuff from nodeinfo, but did not adjust the syms file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It is everywhere else. I even remember one of our scripts failing if
the newline is missing, but it doesn't happen currently.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Guests are handled in callers, but if something goes wrong (when it
cannot be added to virCapabilities, for example), there's no way for
them to free it properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Both QEMU and bhyve are using the same function for setting up the CPU
in virCapabilities, so de-duplicate it, save code and time, and help
other drivers adopt it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
The function has very specific semantics. Split out the part that parses
the backing store specification string into a separate helper so that it
can be reused later while keeping the wrapper with existing semantics.
Note that virStorageFileParseChainIndex is pretty well covered by the
test suite.
Given an SRIOV PF netdev name (e.g. "enp2s0f0") and VF#, this new
function returns the netdev name of the referenced VF device
(e.g. "enp2s11f6"), or NULL if the device isn't bound to a net driver.
This function unbinds a device from its driver, then immediately
rebinds it to its driver again. The code for this new function is just
the 2nd half of virPCIDeviceBindWithDriverOverride(), so that
function's 2nd half is replaced with a call to virPCIDeviceRebind().
This patch splits out the part of virNetDevTapCreateInBridgePort()
that would need to be re-done if an existing tap device had to be
re-attached to a bridge, and puts it into a separate function. This
can be used both when an existing domain interface config is updated
to change its connection, and also to re-attach to the "same" bridge
when a network has been stopped and restarted. So far it is used for
nothing.
This function provides the bridge/bond device that the given network
device is attached to. The return value is 0 or -1, and the master
device is a char** argument to the function - this is needed in order
to allow for a "success" return from a device that has no master.
When enabling IPv6 on all interfaces, we may get the host Router
Advertisement routes discarded. To avoid this, the user needs to set
accept_ra to 2 for the interfaces with such routes.
See https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
on this topic.
To avoid user mistakenly losing routes on their hosts, check
accept_ra values before enabling IPv6 forwarding. If a RA route is
detected, but neither the corresponding device nor global accept_ra
is set to 2, the network will fail to start.
virNetlinkCommand() processes only one response message, while some
netlink commands, like route dumping, need to process several.
Add virNetlinkDumpCommand() as a virNetlinkCommand() sister.
Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.
Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.
NB: The virStorageVolDef* API's won't change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move all the StoragePoolObj related API's into their own module
virstorageobj from the storage_conf
Purely code motion at this point, plus adjustments to cleanly build
Signed-off-by: John Ferlan <jferlan@redhat.com>
When starting a domain with custom guest CPU specification QEMU may add
or remove some CPU features. There are several reasons for this, e.g.,
QEMU/KVM does not support some requested features or the definition of
the requested CPU model in libvirt's cpu_map.xml differs from the one
QEMU is using. We can't really avoid this because CPU models are allowed
to change with machine types and libvirt doesn't know (and probably
doesn't even want to know) about such changes.
Thus when we want to make sure guest ABI doesn't change when a domain
gets migrated to another host, we need to update our live CPU definition
according to the CPU QEMU created. Once updated, we will change CPU
checking to VIR_CPU_CHECK_FULL to make sure the virtual CPU created
after migration exactly matches the one on the source.
https://bugzilla.redhat.com/show_bug.cgi?id=822148https://bugzilla.redhat.com/show_bug.cgi?id=824989
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move the bulk of createVport and rename to virNodeDeviceCreateVport.
Remove the deleteVport entirely and replace with virNodeDeviceDeleteVport
Signed-off-by: John Ferlan <jferlan@redhat.com>
The function is actually in virutil.c, but prototyped in virfile.h.
This patch fixes that by renaming the function to virWaitForDevices,
adding the prototype in virutil.h and libvirt_private.syms, and then
changing the callers to use the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virStoragePoolSourceAdapter from storage_conf.h and rename
to virStorageAdapter.
Continue with code realignment for brevity and flow.
Signed-off-by: John Ferlan <jferlan@redhat.com>
cpuNodeData has always been followed by cpuDecode as no hypervisor
driver is really interested in raw CPUID data for a host CPU. Let's
create a new CPU driver API which returns virCPUDefPtr directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
