VM drivers may need to store additional private data to the status XML
so that it can be restored after libvirtd restart. Since not everything
is needed add a callback infrastructure, where VM drivers can add only
stuff they need.
Note that the private data is formatted as a <privateData> sub-element
of the <disk> or <backingStore> <source> sub-element. This is done since
storing it out of band (in the VM private data) would require a complex
matching process to allow to put the data into correct place.
https://bugzilla.redhat.com/show_bug.cgi?id=1523564
If the vhost-scsi device file cannot be found, the generic error
"error: An error occurred, but the cause is unknown"
is returned. Let's add a real error message to make it clear
why the failure occurred.
We cannot be sure someone initialized the passed *vhostfd and we
certainly don't want or need to be calling VIR_FORCE_CLOSE on what
probably is -1. So let's just return -1 immediately.
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
virStringSplit may return NULL, so we must handle that.
Cc: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Remove the unnecessary clearing of address_array as VIR_ALLOC_N
initialized the array already.
Cc: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Commit id 'c5c96545' neglected to validate that the srcPriv was
non-NULL before dereferencing. Similar problem to what was fixed
by commit id '8056721c' but missed during multiple rebases and
code reworks.
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Commit id '5ab746b8' introduced the function as perhaps a copy
of storageVolLookupByPath; however, it did not use the @cleanpath
variable even though it used the virFileSanitizePath. So in essance
the only "check" being done for failure is whether it was possible
to strdup the path.
Looking at the virStoragePoolDefParseXML one will note that the
target.path is stored using the result of virFileSanitizePath.
Therefore, this function should sanitize and use the input @path
for the argument to storagePoolLookupByTargetPathCallback which
is comparing against stored target.path values.
Additionally, if there was an error we should use the proper error
of VIR_ERR_NO_STORAGE_POOL (instead of VIR_ERR_NO_STORAGE_VOL).
Replace the error message during startup of libvirtd with an info
message if audit_level < 2 and audit is not supported by the
kernel. Audit is not supported by the current kernel if the kernel
does not have audit compiled in or if audit is disabled (e.g. by the
kernel cmdline).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==32171== 32 bytes in 1 blocks are definitely lost in loss record 44 of 107
==32171== at 0x4C2DEF6: calloc (vg_replace_malloc.c:711)
==32171== by 0x55744A9: virAllocN (viralloc.c:191)
==32171== by 0x12CED2: xenMakeIPList (xen_common.c:1186)
==32171== by 0x12D0BE: xenFormatNet (xen_common.c:1221)
==32171== by 0x12F0D2: xenFormatVif (xen_common.c:1889)
==32171== by 0x12F2B4: xenFormatConfigCommon (xen_common.c:1944)
==32171== by 0x13BA32: xenFormatXL (xen_xl.c:1971)
==32171== by 0x1186CA: testCompareParseXML (xlconfigtest.c:105)
==32171== by 0x118A64: testCompareHelper (xlconfigtest.c:205)
==32171== by 0x119E36: virTestRun (testutils.c:180)
==32171== by 0x11970E: mymain (xlconfigtest.c:301)
==32171== by 0x11BEE3: virTestMain (testutils.c:1119)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
==30399== 180 (144 direct, 36 indirect) bytes in 3 blocks are definitely lost in loss record 91 of 111
==30399== at 0x4C2E0FF: realloc (vg_replace_malloc.c:785)
==30399== by 0x5574572: virReallocN (viralloc.c:245)
==30399== by 0x5574668: virExpandN (viralloc.c:294)
==30399== by 0x55747AB: virResizeN (viralloc.c:352)
==30399== by 0x560074D: virStringSplitCount (virstring.c:115)
==30399== by 0x137A59: xenParseXLVnuma (xen_xl.c:442)
==30399== by 0x13952B: xenParseXL (xen_xl.c:1064)
==30399== by 0x11884D: testCompareFormatXML (xlconfigtest.c:152)
==30399== by 0x118A87: testCompareHelper (xlconfigtest.c:207)
==30399== by 0x119E36: virTestRun (testutils.c:180)
==30399== by 0x119186: mymain (xlconfigtest.c:274)
==30399== by 0x11BEE3: virTestMain (testutils.c:1119)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
ncpus would be -1 on error and the cleanup for loop would not be skipped
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1522706
If domain is active, but the undefine API was called without the
VIR_DOMAIN_UNDEFINE_KEEP_NVRAM flag set, the following incorrect
error message is produced:
error: Requested operation is not valid: cannot delete inactive domain with nvram
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move the IDE controller check from command line building to
controller def validation. Also explicitly include the avoidance
check for the implicit IDE controller from qemuBuildSkipController.
Cause the IDE case for command line building to generate a
failure if called to add an IDE since that shouldn't happen
if the Validate code did the right thing.
Move the call to qemuDomainCheckCCWS390AddressSupport from
qemuBuildControllerDevStr to qemuDomainDeviceDefValidateController.
This means we will get the qemuCaps from the driver opaque
variable passed to qemuDomainDeviceDefValidate.
Xen's xl config format has long supported specifying multiple IP
addresses for virtual interfaces. E.g.
vif = [ "ip=10.0.0.1 10.1.1.1 2000::1, ..." ]
Add support for converting multiple IP addresses to/from domXML.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
vif-* scripts support it for a long time, and expect addresses to be
separated by spaces. Add appropriate support to libxl driver.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When reconnecting to a running domain started by old libvirt, which did
not change host-model into a custom CPU definition, we replace the CPU
definition with a specific CPU model from host capabilities. However,
that CPU model may not be supported by the running qemu process. We need
to translate the CPU model to one of the models which libvirt could have
used when starting the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1521202
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virQEMUCapsProbeQMPCPUDefinitions is now a small wrapper which fills in
qemuCaps with CPU models fetched by virQEMUCapsFetchCPUDefinitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we are re-detecting the backing chain after pivoting to the active
block commit target (or block copy target) the disk index needs to be
reset to 0. This is necessary since we move a member of the backing
chain to disk->src but clear indexes only starting from
disk->src->backingStore. The freshly detected images have indexes
starting from 1, but since we've pivoted into an image which was
previously a backing store it would have a non-0 index.
The lookup function would then return the top of the chain for queries
like 'vda[1]' instead of the first backing store.
This problem will not be present once we keep the disk indexes stable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1519745
Since commit 5e5019bf, we've no longer use
VIR_ERR_AGENT_UNSYNCED anymore.
Mark it as DEPRECATED.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virStorageFileReportBrokenChain uses data from the driver private data
pointer to print the user and group. This would lead to a crash in call
paths where we did not initialize the storage backend as recently added
in commit 24e47ee2b9 to qemuDomainDetermineDiskChain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1522682
Separate the logic of creating devices from their gathering.
Use this new function in qemuDomainNamespaceSetupHostdev and
qemuDomainNamespaceSetupDisk.
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The unprivileged libvirtd does not support nwfilter config, by leaves the
driver active. It is supposed to result in all APIs being an effective
no-op, but several APIs rely on driver->nwfilters being non-NULL, or they
will reference a NULL pointer. Rather than adding checks for NULL in many
places, just make sure driver->nwfilters is always initialized.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
SELinux and DAC drivers already have both functions but they were not
exported as public API of security manager.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The manual page clearly states that
gettid() is Linux-specific and should not be used in programs
that are intended to be portable.
Unfortunately, it looks like macOS implemented the functionality
and defined SYS_gettid accordingly, only to deprecate syscall()
altogether with 10.12 (Sierra), released last late year.
To avoid compilation errors, call gettid() on Linux only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Clean up the style a bit w/r/t to not using a unary operator on an
integer value that could be zero - compare vs. zero instead.
Set the def->mem_nodes[*].distances to rdist or ldist inside the
if condition - no need to set outside since the value being set
to is what was fetched.
During cleanup, be sure to initialize the ndistances on error and
use the < 0 comparison not the unary one.
==899== 39 bytes in 1 blocks are definitely lost in loss record 732 of 1,003
==899== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==899== by 0x8B68CE7: vasprintf (in /lib64/libc-2.25.so)
==899== by 0x55498D2: virVasprintfInternal (virstring.c:708)
==899== by 0x55499E7: virAsprintfInternal (virstring.c:729)
==899== by 0x2BECFFF0: qemuGetMemoryBackingBasePath (qemu_conf.c:1757)
==899== by 0x2BF23225: qemuStateInitialize (qemu_driver.c:893)
==899== by 0x563073D: virStateInitialize (libvirt.c:770)
==899== by 0x124CC4: daemonRunStateInit (libvirtd.c:834)
==899== by 0x55521CD: virThreadHelper (virthread.c:206)
==899== by 0x88D9686: start_thread (in /lib64/libpthread-2.25.so)
==899== by 0x8BEAEFE: clone (in /lib64/libc-2.25.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==1277== 8 bytes in 4 blocks are definitely lost in loss record 39 of 131
==1277== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==1277== by 0x68BBBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1277== by 0x53B1DC2: virXMLPropString (virxml.c:510)
==1277== by 0x53D696A: virDomainDiskBackingStoreParse (domain_conf.c:8639)
==1277== by 0x53DA684: virDomainDiskDefParseXML (domain_conf.c:9590)
==1277== by 0x53F619F: virDomainDefParseXML (domain_conf.c:19233)
==1277== by 0x53F96EE: virDomainDefParseNode (domain_conf.c:20083)
==1277== by 0x53F9540: virDomainDefParse (domain_conf.c:20027)
==1277== by 0x53F95E6: virDomainDefParseFile (domain_conf.c:20053)
==1277== by 0x44D1D4: testCompareDomXML2XMLFiles (testutils.c:1265)
==1277== by 0x42FC7C: testXML2XMLActive (qemuxml2xmltest.c:71)
==1277== by 0x44AD20: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
