Commit Graph

60 Commits

Author SHA1 Message Date
Cole Robinson
c800e29b87 tests: Add several net model passthrough tests
Examples of passing unknown strings through <interface>
<model type=X/>

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Jim Fehlig
2ea9d403ff tests: move xml2sexpr tests to WITH_LIBXL
In preparation of removing the legacy Xen driver, move the
xml2sexpr tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert sexpr <-> XML.

There is some test file fallout due to differences in handling
of default values between xend and libxl.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-09 11:33:30 -06:00
Daniel P. Berrange
c703913cc0 Remove non-existant 'wiremode' attribute
The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.

Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-11-30 10:20:45 +00:00
Laine Stump
9658e70f7d conf/openvz: eliminate incorrect/undocumented use of <source dev='blah'/>
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).

When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.

In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.

This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.

NB: I decided on this course of action after mentioning the
inconsistency here:

  https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html

and getting encouragement do eliminate it in a later IRC discussion
with danpb.
2016-06-26 19:33:08 -04:00
Jim Fehlig
1dd34bbb4b xenconfig: support vif bandwidth in sexpr parser and formatter
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.

  (device
    (vif
      (mac '00:16:3e:1b:b1:47')
      (rate '10240KB/s')
      ...
    )
  )

Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add unit tests to check the conversion logic.

This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
2016-01-08 18:56:00 -07:00
Jim Fehlig
f2b4a65728 Xen: tests: use latest XEND_CONFIG_VERSION in xml2sexpr tests
Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:34 -07:00
Jim Fehlig
bec993d60a Xen: xenconfig: remove disks from '(image)' sexpr
It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:34 -07:00
Jim Fehlig
134e05e005 Xen: tests: remove old xml2sexpr tests
Remove XML to s-expression converstion tests for old xend 3.0.2
config format.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Philipp Hahn
11ec6bd891 Xen: Fix <clock> handling
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)

XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
        due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'

Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)

xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.

For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.

With these changes, it is also necessary to adjust the xen tests:

"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.

adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.

Some statements change their order because code was moved around.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2012-04-02 09:33:54 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Jim Fehlig
eb3143154e Do not drop kernel cmdline for xen pv domains
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified.  The current config-to-sxpr mapping
ignores cmdline when bootloader is present.

Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.

V2: Fix existing testcase broken by this patch and add new testcases
2011-07-11 09:11:15 -06:00
Paolo Bonzini
e547e44cb0 xen: parse and generate hpet item in sxpr
Recent versions of Xen disable the virtual HPET by default.  This is
usually more precise because tick policies are not implemented for
the HPET in Xen.  However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.

This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-05-10 16:16:55 -06:00
Eric Blake
3b750d136e maint: avoid long lines in more tests
* tests/xml2sexprdata/*.sexpr: Add backslash-newlines.
* tests/sexpr2xmldata/*.sexpr: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-aio.args: Likewise.
2011-03-03 07:45:31 -07:00
Michal Novotny
3ee7cf6c9b Add support for multiple serial ports into the Xen driver
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.

Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004 but this patch
is for upstream version of libvirt.

Also, this patch is addressing issue described in RHBZ #670789.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
2011-02-25 11:33:27 -07:00
Eric Blake
65532f4558 maint: improve tests distribution
* tests/Makefile.am (EXTRA_DIST): Sort, and add directories.
(SUBDIRS): Drop automake recursion into subdirs.
* tests/commanddata/Makefile.am: Delete.
* tests/confdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am: Likewise.
* tests/xencapsdata/Makefile.am: Likewise.
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
2010-12-17 11:57:11 -07:00
Cole Robinson
3afe5d402b xend: Escape reserved sexpr characters
If we don't escape ' or \ xend can't parse the generated sexpr. This
might over apply the EscapeSexpr routine, but it shouldn't hurt.
2010-11-22 16:43:29 -05:00
Eric Blake
0fab10e5ed vcpu: improve vcpu support in xen command line
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.

See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html

This relies on the fact that def->maxvcpus can be at most 32 with xen.

* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
2010-10-19 10:06:45 -06:00
Eric Blake
a74f4e4464 vcpu: add current attribute to <vcpu> element
Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html

<domain ...>
  <vcpu current='x'>y</vcpu>
...

can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus.  If current is omitted, then
current and max are assumed to be the same value.

* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
2010-10-19 09:58:18 -06:00
Eric Blake
94eb11f67a tests: fix spurious test failure
Failure introduced in commit 3a092f389.

* tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr: Fix typo.
2010-10-13 11:33:10 -06:00
Daniel P. Berrange
3a092f3899 Fix Xen SEXPR generation to properly quote strings containing ()
* src/xen/sexpr.c: Ensure () are escaped in sexpr2string
* tests/sexpr2xmldata/sexpr2xml-boot-grub.sexpr,
  tests/sexpr2xmldata/sexpr2xml-boot-grub.xml,
  tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr,
  tests/xml2sexprdata/xml2sexpr-boot-grub.xml: Data files to
  check escaping
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Add boot-grub
  escaping test case
2010-10-13 16:42:48 +01:00
Jim Fehlig
14515a728d Add tests for Xen's blktap2 implementation
xml2sexpr and sexpr2xml tests for blktap2
2010-08-31 09:54:24 -06:00
Jiri Denemark
e27277ebc8 xml2sexprtest: Remove graphics from unrelated tests
This caused unnecessary make check failures when libvirt is configured
--with-rhel5-api
2010-08-24 10:10:16 +02:00
Jiri Denemark
20311a9af8 xen tests: Fix missing "type ioemu" with rhel5-api
The most common cause of errors with rhel5-api turn on was missing
"(type ioemu)" in sexpr or its equivalent in XM configuration file. This
happens because the presence of that part in sexpr (or cfg) depends on
xen version the host is running. Let's avoid it by explicitly specifying
interface model which ensures "type ioemu" will always be emitted.

This patch adds

    <model type='e1000'/>

withing the interface element in all affected xml files. And

    (model 'e1000')

to all corresponding sexpr files with similar fix to cfg files. Such
configuration works regardless on Xen version.
2010-08-24 10:10:16 +02:00
Eric Blake
fb8552f83a maint: simplify some ignore files
* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
2010-06-15 07:31:10 -06:00
Cole Robinson
953809dbe4 xen: Fix chardev listen sexpr formatting
'listen' isn't a valid qemu-dm option, as reported a long time ago here:

https://bugzilla.redhat.com/show_bug.cgi?id=492958

Matches the near identical logic in qemu_conf.c

v2: When parsing sexpr, only match on ",server", rather than
    full ',server,nowait'.
2010-05-27 14:26:05 -04:00
Jim Meyering
67904847f0 tests: do not use the ":disk" suffix in sample xml input
* tests/xml2sexprdata/xml2sexpr-curmem.xml: Remove ":disk" suffix from
"<target dev=" value.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.xml: Likewise.
* tests/xml2sexprdata/xml2sexpr-curmem.sexpr: Update expected output
to match.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.sexpr: Likewise.
2010-03-23 11:22:26 +01:00
Jim Meyering
083b901eb3 build: avoid non-srcdir "make distcheck" failures (srcdir vs wildcard)
* tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
* Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.
2010-02-25 10:50:18 +01:00
Daniel P. Berrange
4359900ed1 Remove restriction on duplicated sound devices in parser
It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's

* src/conf/domain_conf.c: Remove hack which deleted duplicated
  sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
  models
2010-01-18 12:44:50 +00:00
Jiri Denemark
81ea6e4d9f Tests for interface type/model configuration
add a set of tests for Xen interface type and model configurations
2009-12-04 17:01:34 +01:00
Daniel P. Berrange
2d6adabd53 Don't blindly reorder disk drives
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.

* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
  routines. Add API to insert a disk into existing list at
  the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
  qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
  instead. Fix reordering bugs when hotunplugging disks and
  networks. Fix memory leak in disk/net unplug
2009-09-02 15:19:34 +01:00
Jim Meyering
07613d2020 remove all trailing blank lines
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
2009-07-16 15:06:42 +02:00
Jim Meyering
fb98f4b10d remove all .cvsignore files 2009-07-08 16:17:51 +02:00
Daniel P. Berrange
e4073623a6 Support PCI passthrough for Xen 2009-04-03 12:38:52 +00:00
Daniel P. Berrange
b02c0455d1 Fix localtime handling for newer XenD 2009-04-01 10:36:52 +00:00
John Levon
e80f10064e parse IP address for bridge interfaces 2009-01-23 01:48:47 +00:00
Jim Meyering
164fbbd6e6 generate .gitignore files from .cvsignore ones
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
2008-10-17 10:03:15 +00:00
Daniel P. Berrange
bf347f5af0 Fix broken test case data files 2008-09-17 15:39:11 +00:00
Cole Robinson
a82bd0784b Fix reading vncdisplay from xend, add several test cases for xen vnc corner case
s.
2008-09-09 13:53:58 +00:00
Daniel P. Berrange
126d3ebeea Fix starting of xen domains without a PVFB console by removing default emulator 2008-09-05 11:52:12 +00:00
Cole Robinson
34b1a03402 Fix disk ordering and add target duplication checking when parsing domain xml. 2008-09-03 14:30:24 +00:00
Daniel P. Berrange
8c6f5a546b Convert XenD XML->SEXPR conversion to new domain XML APIs 2008-07-25 13:17:27 +00:00
Daniel Veillard
0feb4c9552 More regression tests for sound support
* tests/qemuxml2argvdata/qemuxml2argv-sound.args
  tests/qemuxml2argvdata/qemuxml2argv-sound.xml
  tests/sexpr2xmldata/sexpr2xml-fv-sound-all.sexpr
  tests/sexpr2xmldata/sexpr2xml-fv-sound-all.xml
  tests/sexpr2xmldata/sexpr2xml-fv-sound.sexpr
  tests/sexpr2xmldata/sexpr2xml-fv-sound.xml
  tests/xmconfigdata/test-fullvirt-sound.cfg
  tests/xmconfigdata/test-fullvirt-sound.xml
  tests/xml2sexprdata/xml2sexpr-fv-sound.sexpr
  tests/xml2sexprdata/xml2sexpr-fv-sound.xml: other regression
  tests from previous commit
Daniel
2008-05-07 14:44:20 +00:00
Daniel P. Berrange
159cb2b97c Added support for network interface model setting 2008-04-30 12:30:55 +00:00
Daniel P. Berrange
e6f1123819 Added full support for serial and parallel devices to Xen drivers 2008-04-26 14:22:02 +00:00
Daniel P. Berrange
e87e3f86bf Added support for booting off kenrel+initrd with HVM guests 2008-02-05 16:21:25 +00:00
Daniel Veillard
ef4006b3a5 * tests/sexpr2xmltest.c tests/xml2sexprtest.c: warn before exiting
if the path environment variable is missing, add the tests for
  <shareable/> from/to w! ode for disk
* tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.sexpr
  tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.xml
  tests/xml2sexprdata/xml2sexpr-disk-block-shareable.sexpr
  tests/xml2sexprdata/xml2sexpr-disk-block-shareable.xml:
  the new tests data
Daniel
2007-11-20 10:05:45 +00:00
Daniel P. Berrange
f029721d2b Added support for input devices 2007-07-18 21:08:22 +00:00
Daniel P. Berrange
67c346b102 Added new <clock/> element in XML for choosing utc/localtime 2007-07-16 21:30:30 +00:00
Daniel Veillard
a80faa4bf0 * src/xend_internal.c src/xm_internal.c src/xml.c: add support
for arguments to bootloader, patch from Hugh Brock
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
  tests/sexpr2xmldata/sexpr2xml-pv-bootloader.sexpr
  tests/sexpr2xmldata/sexpr2xml-pv-bootloader.xml
  tests/xml2sexprdata/xml2sexpr-pv-bootloader.sexpr
  tests/xml2sexprdata/xml2sexpr-pv-bootloader.xml: add specific
  regression tests
Daniel
2007-06-07 13:50:18 +00:00
Daniel Veillard
1ec25df269 * src/xend_internal.c src/xml.c: applied patch from Nobuhiro Itou
to handle CDRom devices with no device name
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
  tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.sexpr
  tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml
  tests/xml2sexprdata/xml2sexpr-no-source-cdrom.sexpr
  tests/xml2sexprdata/xml2sexpr-no-source-cdrom.xml: added regression
  tests for this case based on Nobuhiro Itou test inputs.
Daniel
2007-04-11 16:06:30 +00:00